Qosmio F55 - LCD replaced and brightness controls are reversed back

Hello

the LCD for my Qosmio F55-Q502 cracked and I ordered the same room and when I installed it, everything works fine and everything but the brightness up and down are reversed. As Fn + F6 makes more brilliant while Fn + F7 makes it more dark? The first that comes with it is a lp154wp1 (tl) (e1) but I had is a lp154wp1 (tl) d1).

Does anyone think that the bit of a variation of the model can do reverse controls? Even on Windows when you cursor to the right BRIGHTNESS, it darkens and to the left, it illuminates. For anyone else who needs information on their Qosmio F55, the original is also a lp154wp1 (tl) (e1) and also known under the name of lp154wp1 (tl) (a3) which is written on the Board of the lcd screen. The replacement lp154wp1 (tl) (d1) is also known as a lp154wp1 (tl) (a2) also wrote on the lcd dashboard

Any suggestion or help would be appreciated!

Hi hulkster,.

Where you have ordered the new view and it are a Toshiba original spare part?

If yes I would contact an authorised service dealer or the store where you bought it. In my opinion the screen is not 100% compatible for your model. This would also explain the different reference numbers you posted

Tags: Toshiba

Similar Questions

  • Satellite A500 - brightness controls are backwards autour

    I have an A500-1gl and I noticed the controls to increase or decrease the brightness are backwards autour.
    Either there is a setting I am missing or an upate this fucked up, someone had similar problems?

    Hello

    Do you mean the combination of keys FN + F6/F7?
    What exactly happens?

    Since when you noticed this behavior?

  • LCD, extented and Labview controls

    Hello

    I use a LCD series (https://www.sparkfun.com/products/9395) associated with a TTL - USB converter (http://www.miniinthebox.com/fr/cp2102-usb-2-0-vers-uart-ttl-convertisseur-6pin-serie-du-module_p3910... and labview with VI No. 1.) Sending simple commands such as VI No. 1 works well. My problem is that I do not know how to send orders Extended Page 2 here https://www.sparkfun.com/datasheets/LCD/SerLCD_V2_5.PDF.

    For example, as I understand the datasheet, I need to send 124 128 to disable the brightness of the screen. If I type "124 128" in VI n ° 1 the LCD displays "124128.  I get the same result with VI n ° 2.

    If anyone know what I can try next?

    Thanks a lot.

    User1979

    It seems that these values (124 and 128) are the decimal equivalent of the byte to transmit 0x7C and 0x80. It is not possible to say with certainty from your images, but most likely you send the characters of ASCII text for '1' '2' '4' and '1' '2' '8 '. Since then, they appear on the screen that is certainly what is happening.

    In your second pop VI on the string constants and select hexadecimal display in the context menu. Then type the values hex 7 c and 80.

    Lynn

  • Google Maps: pan and zoom controls are not displayed. 'PIN' markers can appear only once, and then disappear.

    Loading Google Maps, either directly, or where they are incorporated into other sites, orders pan and zoom are not displayed. Location markers 'PIN' can appear only once, but disappear after doing anything with the card. I'm on the last Windows XP and latest Firefox. This problem is long-standing and has remained the same during several different versions of Firefox and Windows updates. I tried "CTRL-0' no effect."

    Problem solved by 'Reset Firefox'. Before that, tried "Safe Mode", no difference. Not aware of the limits on the cookies or the memory usage. Controls on the left (Pan, zoom) for Google Maps were good here and in usual and sizing correct positions and could be found with the cursor and activate it, but 'ghosts' that were not display. Same problem if the content was maps or satellite pix. Reset solved the problem.

  • DV6 1007TX best components (volume, CD track and wireless controls) are inadmissible

    The components of the page on my 1007TX dv6 recently stopped working.  Therefore, I am unable to connect to a wireless network or adjust the volume via the component from the top of the page, only via the volume control software.

    I tried a system restore, and it did not work.  I have reinstalled the wireless drivier, even once, has no difference.  I'm also an error "CNDNDIg has stopped working", I don't know if this is related.

    Any idea on how to get the top of the graphic component page works again and what is the error of CDCNDIg?

    Hello

    This can sometimes be caused by a buildup of static electricity.  Stop the laptop, remove the AC adapter and then remove the battery.  Now, press and hold the button of power for a good 30 seconds.  Reinsert the battery, plug in the power adapter and start the laptop to see if it contributed to the issue.

    The file you mention belongs to Canon Digital software, you may need to uninstall this software, restart the computer and then reinstall it (or if there is a version made software updates, install this).

    Best wishes

    DP - K

  • Qosmio G10: DVD-R and DVD + RW are the CD when inserted

    When viewing my empty DVD drive via Windows Explorer, it displays "DVD - RAM drive".
    When I put a blank disc DVD-R or DVD + RW (brand new Phillips) in the drive, the description of the car immediately passes to 'CD player', and I only get audio options.

    I have never managed to write on a DVD from this machine. It is a completely standard generation, running XP Media Center.
    It will play all CDs and DVDs I've tried. It is supposed to write in all DVD formats.

    I've written on a CD without any problem previously - and (try to) DVD writing I disabled the "Enable CD writing on this automatic diaphragm.

    Can someone tell me what I need to do?

    Thank you very much...

    Hello

    I would say to change the AutoPlay settings in the properties of the CD/DVD drive. This option you will find in the AutoPlay tab.
    Here you can choose the blank CD of content type, then the action.

    Good bye

  • Firefox 7 cannot run juniperclientinstaller JAVA and Activex controls are not available

    upgrade to firefox 7. Trying to site VPN which has invoked the Juniper customer setup. Setup stops loading the same file, but it cannot exceed

    He works now in FF 8

  • HP 14 laptop: brightness control problems

    Hello

    My mother has recently bought a new HP 14 laptop and when the AC is plugged in, the display BRIGHTNESS varies from no visible state. Brightness controls are also reversed, for example when I press the brightness control, it will be brighter.

    I thought it could have been a graphics driver issue but I have updated graphics for the latest versions and still no change. graphic design is a "Intel HD 4000'.

    All the solutions to this problem would be great,

    Thank you

    Liam

    @lm13181,

    Hello and thanks for the display on the HP support forums.  With Windows 10 some of the performance parameters are a bit off.  The first thing I would try is running an update of the system BIOS.  Or BIOS Reset would be my first choice.

    Here is a link to help you with this.

    HP Notebook PC - restore BIOS

    Please let me know if it helps.  Thanks again for posting and have a great day.

  • Binaries and Oracle control

    Hi all

    I want to know if the binaries and oracle control are they related in any way.

    I have my physical on a SAN storage and my files binary oracle on a local disk.

    In case if I delete my binary oracle and restore from a backup, I'll be able to start my database with no problems.
    Since all my oracle, controlfiles and redofiles data files are located in the SAN storage.

    [email protected] wrote:
    Hi all

    I want to know if the binaries and oracle control are they related in any way.

    No...

    >

    I have my physical on a SAN storage and my files binary oracle on a local disk.

    In case if I delete my binary oracle and restore from a backup, I'll be able to start my database with no problems.

    Yes...

    Concerning
    Rajesh

  • Qosmio F55-Q502 cannot use GPS in the Viet Nam and Southeast Asia

    I have a Toshiba Qosmio F55 Q502 with purchase of system built-in GPS Garmin from the United States.
    But when I bring it to the Viet Nam and try to use the GPS, it does not work.

    I open Garmin Mobile PC, just Americans and Europeans of the cards.
    I try to activate the GPS, but the satellite always signal empty.

    I tried to go many places with view of clear skies but cound around ' nt captures the satellite signal.

    If this GPS is Globe Positioning system which means it can be used anywhere in the world.
    I do not know may be my GPS have the problem or the GPS is unusable in VietNam.

    My laptop just to buy a few days and I have not tried the GPS in US before.
    Can someone help me solve this problem?

    GPS should be worldwide.

    You can use a normal GPS for your car? Or as in the Nokia N95 GPS phone?

  • ENVY 15 t-ae000: (F2 and F3) brightness control keys do not work after update bios and Windows 10 update

    After that I upgraded to the latest version of the BIOS and upgraded to Windows 10, brightness controls no londer work.

    Would appreciate any help.  Thank you

    Hello

    If your laptop uses Nvidia Optimus (Intel + Nvidia GPU), try to download and reinstall the Intel HD graphics driver on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

    When reinstalling, restart the laptop.

    Kind regards

    DP - K

  • How controls are grouped in the front pannel "write basic series and Read.vi.

    I wonder how the controls are grouped on the front. An example is the "basic series write and Read.vi. The rocker of Scripture and the 'rope to wirte' are grouped in a raised area. I couldn't move individual out of this box control when I tried to arrange the controls. How they are grouped and how do I move them individually?

    Thank you.

    Select the Group of controls you want to Group/Ungroup and select the option group/ungroup as shown above.no wonder in this

  • Live webcam updater screwed to the top of my Acer W4 (brightness controls and screen Metro broke)

    UGG knew the deivce is working good

    I did a live update for a new bios it installed and work, after the reboot, my screen metor is slow, he hasmore icon than he had done previously and now my brightness control has stopped working on the screen. I can't turn down the brightness at all in the control parameter or power controls.

    How to take the subway at only 3 rows of icons and how do Iget my brightness control works again? It's virtually unusable tablet, screen is bright andmetro screen is horrible slow. Already done a reboot, live update shows no new updates.

    Need help on this a little.

    Nevermind, I saw in the device manager that the firmaware somehow wantedanother restart to complete the update of the firmware. Very strange, because it seems to complete the first time and the live update did not show anything in the waiting.

  • I foolishly used my camcorder to the outside and the clips are too bright. How can I change the contrast on each of them in Movie Maker?

    I foolishly used my camcorder to the outside and the clips are too bright.  How can I change the contrast on each of them in Movie Maker?

    Use the effects... Decrease brightness / contrast down.

    Here are the steps to change all the clips on the timeline in a batch.

    Drag all the clips on the timeline... switch to... See the table of Storyboard.

    Reach... Edition / select all, or select an element and type... CTRL + A...

    Make a right click the effect you want to add and choose... Add to storyboard table.

    You can add up to 6 cases of an effect, but you need to left click
    a clip and "select all"... or type... Time of .ach Ctrl + A...

    It may take a little practice to master this, but it's easy once you see
    what he can do.

  • I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

    I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

    Hello

    1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

    2 have you made changes on the computer before this problem?

    I ask through the following article to find out how to set up Parental controls:

    http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

    http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

    After completing the above links persist issue please fallow the mentioned below of the methods.

    Method 1: Disable UAC (User Account Control) and check the result
    See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

    Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

    Important: Enable UAC after you complete the steps.

    Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
    See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

    Hope the above information is helpful.

Maybe you are looking for

  • complaints

    Has anyone else been fooled into thinking that when you sign a two-year contract for airtime and handset, the handset could be adapted to use for these two years? I'm being tossed about between the Terminal and post and still do not have a handset I

  • Satellite L450D - reset in the factory installation

    Hi guys, tried a factory reset and the laptop turned off itself to half way through, and I can't return it to all the. The laptop is a Toshiba Satellite L450D-11w and it was under windows 7. When I try to load it up I get the message bootmgr lack pre

  • Services Windows problems after cloning a HARD drive

    Hello I recently cloned my HARD for one SSD drive, using the SSD as my boot device. Since then, I was able to successfully access Windows services. For example, I've tried to expand a partition on my SSD and went to computer management. I got a messa

  • Cisco Telepresence 5320 MCU

    Hello.. We have integrated Cisco MCU 5320 CUCM Version 10.x and we are able to make calls to endpoints registered CUCM (SX20) to MCU with the ID of the meeting in addition to this, we use also VCS-control and have endpoints registered Polycom on to h

  • Windows 8 Windows Update fails with error 80244FFF

    I have just upgraded to windows 8 and windows update now refuses to check updates, declaring that he "could not search for new updates" with an error code of 80244FFF. I tried: (a) perform the upgrade by following the steps in the wizard upgrade - no