Qosmio F60 - 00Y has an optical output of the Audio (toslink\spdif)?

Similar Questions

• Upgrading RAM on the Qosmio F60 - 00Y

  I have a Qosmio F60 - 00Y and I want to upgrade the Rams inside 4G to 8G and I want to know what type of Rams are?

  See you soon.

  I know Qosmio F60 - 00Y supports DDR 3 (1066 MHz) up to 8 GB, so you can use 8 GB of memory (4 GB + 4 GB) DDR3 (1066 MHz)

• Qosmio F60 - 00Y slow/laggish

  Hello

  I have a laptop Qosmio F60 - 00Y which is usually very quick, but last night at around 10:30 - 23:00 (16th September Australian Eastern Standard Time) I noticed that he was behind schedule - scrollbar on Firefox "delayed" rather smooth, so I would scroll down and Firefox would freeze so during a few seconds and then I would be towards the bottom of the page accordingly.

  I did a number of things:
  -taking the battery out and put new
  -update the BIOS
  -vacuum the outside vents
  -restarted several times
  virus/spyware/malware - controls
  -uninstalled Firefox

  All this seemed to improve a bit but it's still not as fast than it was before. I uninstalled Firefox, because I remembered that it was updated yesterday - I'm not sure of the exact time and installed Google Chrome, which is faster, but other applications such as Windows Media Center are still quite slow. Minesweeper even slightly late.

  Processor: Intel Core i7 2.67 GHz
  RAM: 4 GB (2.98 usable)
  OS: Windows 7 32-bit

  The fan speed is a constant 60-70% according to Health Monitor, I don't know if this is normal.

  It takes more time to stop and start what he used, a minute to start and then considerably longer that usual to log and load all of the things that I start up, which isn't much.
  Applications take more time to load and trolling, same when I right click on some things it lag which I never had.

  I have no idea whether hardware or software. I tried vents because I haven't had that in a while and it gets a little dusty that I it does not move much. The manual recommends cleaning the cooling system every few months, I should try that?

  Thank you.

  Try the means to back the OS more early just to see if laptop will work as before. To do this use System Restore tool.
  You can find it under Start menu > all programs > Accessories > system tools > system restore.

  Please post comments.

• Qosmio F60 - 00Y - Intel RST, TOSHIBA PC Health Monitor crash

  Hello

  All started having problems today with my Qosmio F60 - 00Y bought June 2010. I have an extended warranty but I wanted just a quick fix since the system is still operational.

  Because I lost my recovery to factory settings I can not reset my system.
  It works very well at the moment as long as I do not open two programs Intel RST, TOSHIBA PC Health Monitor.
  When I opened one, system decides to freeze and accelerates the speed of the fan and he stops the laptop. I did system restore several times too and same problem happens again.

  I reinstalled the two programs of:
  http://www.MyToshiba.com.au/support/computers/Qosmio/F60/pqf65a-00y002/download

  After you have reinstalled assuming, programs will run again. Same thing happens, hangs and stops.

  I do regular anti-virus and anti spy-wear check-up with trend micro 2012 and still active every 7 days and defragment the system every 7 days.
  No virus or spy-wear observed.

  Help, please!
  Thank you
  S. Lem

  It is not easy to say how you can solve this problem.
  Try to remove any problematic applications, clean the registry entries and try to install it again.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• Qosmio F60/05-PXE-E61 Media failure, check the cable of

  Hi, I have a new laptop Qosmio F60/05 which is now having problems starting.
  I bought on 29/12/2010 and used again except for the internet.
  On a couple of occasions, an error has popped up saying that the computer has detected movements of hard drive...

  I don't remember the rest of the message, but it's usually after I took the laptop on the coffee table for sofa etc.
  Only now do I think it's a problem because portable computers are designed for portability and should be able to deal with this kind of movement.

  Perhaps this error and the following are connected?
  This morning I turned on my laptop and it took a while to start. Then the error messages came up saying that she had to restart and to restart the "Media Failure-check cable PXE - E61" error message "PXE - M0F outgoing PXE ROM" "Insert system disk in drive."

  I'm not tech savvy and don't know what to do now that no system disk provided with the laptop.

  I have read other forums on other sites that say it is a hard drive problem. Is this true and can I consider warranty return?
  I can't believe, I get questions on a laptop the week old and I'm pretty bored...

  Help, please

  Lauren

  Hello

  Message PXE means that laptop would not boot from other sources, but tried to boot from LAN. But LAN startup was not possible and that's why you have received this message.

  In most cases the HARD drive was not found and so the laptop going at the start of LAN. In your case, I would recommend accessing the BIOS and check the status of the HARD drive.

  But if you start windows in safe mode or in other modes, this means that the HARD drive is ok.

• View on Qosmio F60 - 10U towers Mozaic and blocking of the system is

  Since the day I bought F60 - 10U. I am facing problem Jules Destrooper. My screen sometimes turns into Mozaic and system crash at the same time. the only thing I can do is to restart with the power button / stop.

  I gave the service center; They said that his virus and the need to get in shape. as I was 100% sure that it is not because of the virus. I took over from there.

  I tried below:

  1 update display driver
  2 display downgrade driver
  3. factory reset
  4 search for viruses with different engines
  5. updated all drivers

  Nothing works...

  Someone else had the same problem?

  Hope I can get a fix for this.

  Here is a picture of the screen when its happens.
  Link: [http://www.glowfoto.com/static_image/11-120740L/7879/jpg/09/2010/img4/glowfoto]

  Rgrds,

  Colinet

  I put t think that this issue has nothing to do with the virus and I think that the graphics card is defective. All that you have done is good and after virus installation of factory image will be killed and all should work well.

  Contact service again, let them test with the settings and if the same thing happens again I assume that they will exchange the motherboard.

• Why has no expected output to the report job history?

  Hello

  I use web services BEEP to schedule reports and retrieve them (by e-mail and the history of work report in the web interface) and have had success with it. Today, when I added a new report and changed a few things, I can no longer see or retrieve the output of the report as a result of the scheduled task.

  So, to be clear, under 'output & Delivery' for a history of particular job, in the table, the output shows, the only line of the table just text in it who told you: "no available exit. My previous experience, this kind of thing always had a link to the report that was generated.

  Here are some of the remarkable things, I changed:

  -a different user to the web service BEEP ScheduleService authentication

  -another folder stores reports

  -layouts are BI Publisher templates instead of RTF models

  Scheduled reports are sent by e-mail (e-mail is the only destination I specify) with success always, so I receive the report by email very well... but I need to be able to get the release of the web interface, after it was sent by email too. And he has not shown when I view the error report work history.

  Any ideas on what Miss me which prevents the release of the report to appear in the report job history? Maybe an administration that disables the Central exit by user/folder?

  Thank you...

  
  Kevin

  It turned out that the name of the job was too long. The name of the job may include a maximum of 100 characters.

• Satellite L500-131, an HDMI output to the audio amplifier

  Hello

  I can't the sound of my Satellite L500-131 HDMI port to my Pioneer amp supposed to be designed to manage these tings...

  Think the problem is in the early stages as I * don't * select "Realtek HDMI output" as default + output + option is not available.
  Playing around, I managed to get to an old Microsoft driver hidden in memory somewhere and could select HDMI output 'default' through the laptop speakers. But ultimately this ddn can't get sound through either, well that the volume to "sound board" control of Vista indicates activity signal (bars during playback of DVD)... :|

  No idea what is the problem? By selecting "Output HDMI" audio output by default seems to be a Solver for everyone, but it's the only option that is not left in me, so frustrating... :|

  Thank you very much for any help provided.

  Hello

  To be honest I often use HDMI connection on my laptop but I never had any problems with this connection. Everything is working properly and even I checked again all works well!

  Anyway, in your case, I'll try reinstalling the audio driver. You can find it on the Toshiba site.

  If you use the HDMI connection, connect the cable first. Then turn on your TV or your amplifier and finally the laptop.
  Check it!

• Qosmio F60 - 00Y - no noise until activating / deactivating

  Hello
  There are moments when I don't get any audio on my computer even when the volume is up. I get only audio when I using the touch button to mute and then turn the sound back on.
  Sometimes, I have to do a short time before the audio back.

  Is there a solution to this?

  Hey Buddy,

  I can t imagine that the sound is muted automatically

  You can also publish information on the current operating system? Using Linux, Windows, etc.?

  If you are using Windows 7, I recommend you to update the audio driver from the official website of Toshiba. So delete the current version, restart the computer and install the latest version of it.

  I hope that it helps :)

• Qosmio F60 - whenever it starts, says it's the first use

  My laptop has just got back from repair (they replaced the hard drive). Now whenever I turn it on or restart it, it says Windows configures the computer for first use. Once the Panel opens with "how to customize your computer. In addition, a small window opens with '3.14 system preparation tool' and even if I click OK, it does not.
  Otherwise, my computer works normally.

  How can I stop my reflection notebook it starts for the first time?

  Hey Buddy,

  > a small window opens with '3.14 system preparation tool' and even if I click OK, it does not.
  And what happens if you n t click this tool?
  Perhaps that the laptop has been reinstalled from approved maintainer and if the installation must be completed.

  Otherwise, I would recommend reinstalling Windows disk recovery Toshiba again. Maybe something was wrong during installation and so it would be necessary to reinstall Windows again.

  Check this box!

• Hello. I have a site that display many audio outputs using the < audio > HTML5 tag. Firefox is the only browser that fails to show all audio files on the Web page.

  It shows only the first audio file. All other browsers show all audio files...?

  The file is played for me, so it is possible that you need to re-code the ogg files to make them compatible with Firefox.
  
  I can play with MPlayer and VLC on Linux, but not with the audio player in Firefox.

• Qosmio F60 - 14K - can't boot from SSD drive

  Hello

  Im trying to install a new SSD, but can't, because I can't boot from SSD disk, "Insert a system startup disk" works great as a USB key, even installed Windows 7 top and tried to boot from it, but with a bit of luck.

  I have not tried to switch between IDE/AHCI, but that, because I don't have this option in BIOS. I think I've tried everything I can test, all the tips/help would be much appreciated!

  And so the part of the BIOS by joke to call bios all you can change the settings of the clock and the bootorder more or less!
  Anywhy for more options?

  THX

  Henrik

  Hey Buddy,

  I'm a little confused about your ad m... You wrote that you have installed Windows 7 on it, but you can t boot?
  You get an error message during installation or what exactly is going on?

  Have you ever tried to restore the factory settings of the recovery on new SSD disk?

  Hmm I put t know what BIOS options you want but I think Qosmio F60 BIOS has enough options.
  Normally with the BIOS default settings everything works fine.

• Qosmio F60 - decision to buy or not to buy

  I want to buy Qosmio F60, but I saw some people in the forum complaining abuot the noisy fan and the freezing of the system.
  Also, I read this qosmio F60 heats up pretty quickly.

  Some people also complain that the fan turns always.
  I wonder if Toshiba has solved these problems yet or not.

  Someone can help me to decide whether to go for Qosmio F60 or not

  Hello

  The heat dissipation depends on its portable use.
  Each computer or laptop would create more heat so high performance applications as games to perform
  The noise of the fan speed and fan also depends on the temperature
  By the way; in windows power management, you can control the CPU and the performance module that helps reduce the noise of cooling

• Qosmio F60 integrated switch GPA

  I think that core i5 has a built-in GPU, but in the Qosmio F60, there is no function to change the GPU.

  Does anyone know how it can be change or is it has a special button that I can pass the GPU?

  Hi mate

  I put t know what you mean exactly?
  What you want to spend?

  Qosmio F60 supports an external GPU (graphics chip) and it can be enabled or disabled
  The graphics driver controls everything and affects the graphics memory automatically to the graphics chip