Qosmio F60: audio and video distortion during playback of a media file

Similar Questions

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• Windows Media Player-audio and video freezes during playback

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

  PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

  FREEZE AUDIO AND VIDEO IN WINDOWS MEDIA PLAYER OR VLC MEDIA PLAYER WHILE THAT WATCHING VIDEOS.  WHEN THE IMAGE AND THE SOUND HANGS, THERE IS A DULL NOISE.  THIS FREEZING HAPPENS ON EVERY MINUTE OR SO.  THAT HE IS PAST JUST STARTED ABOUT 3 DAYS AGO.  BEFORE THAT ALL WAS WELL WITH THE PC AND WATCH VIDEOS.  I RUN A FULL WITH MICROSOFT ESSENTIALS SCAN AND SAYS THAT SOME THREATS NOT FOUND.  I REBOOTED, DEFRAGGED, REMOVED THE POWER CORDS, ETC. WITHOUT SOLUTION.

  PLEASE ME TELL HOW I CAN STOP THIS PROBLEM?

  =======================================================
  It might be worth a try to do a system restore in time before the beginning of the question.

  (306084) how to restore Windows XP to a previous state
  http://support.Microsoft.com/default.aspx?kbid=306084

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite P100-188: his stuttering & distortion during playback of DVD and CD

  Hello

  My laptop has developed for the second time, what I can only describe as "stuttering and distorting" during playback of dvd and cd try to burn or rip a cd does not work either.

  The first time this has happened was a few months ago and PC World did a reinstall of windows that solved the problem. It is now again.

  Any help would be much appreciated.

  and why you n t try to reinstall the OS again?
  Seems to some operating system files or registry entries are corrupted.

• My audio and video playback stutters in cc pro 2015.

  my audio and video playback stutters in cc pro 2015.  It complies with the source, or the window of the program.  Continues even if my project is rendered.

  Win 10 64.

  2 x xeon x 5675,

  Quadro 6000,

  48 GB RAM,

  2 128 gb SSDS as a RAID 0 256.

  Is it because I only have the disk for the storage and the OS/software?

  [title published by mod]

  Try to change the entry to zero.

  If you want to continue to use the release of the nVidia card, try to remove the sound card completely.

• DVD ROM audio and video playback jerky/stuttery

  Hi all

  My first post and I'm rather puzzled.

  This problem just - I went to play a DVD (real DVD, not burned) in my laptop and playback was stuttery, audio and video.  Never noticed before, but is now constant.

  I have run all software troubleshooting and even checked this forum for solutions.  The most common seems to be to check if DMA is enabled, and it is.  I tried several video players (VLC, media library, WMP11) and the problem exists on each of them.  I checked to make sure that all drivers are up to date, and they are.

  I have an Inspiron E1705, 2,00 ghz core2duo, 1 GB of RAM.  The DVD player is a DVD + RW SDVD8820 Phillips.

  Ideas?

  Any suggestions would be helpful and appreciated.  Thanks for reading!

  
  

• Windows 7 suddenly agitated developed audio and video playback after a week of everything fine

  I don't know if this means that my HARD drive is going bad on this new generation, or if something got screwed in place in Windows 7?

  Until yesterday, everything was pretty much OK for a week.  Last night, however, I started to develop audio and video ground.  Today, when I went to start, the computer hung on Beeeeeeep I turn it off and restart again.  I have still the video choppy.  I tried some diagnostic program of my Western Digital Green 1 TB 1 week drive HARD drive, and a quick test that was supposed to take 2 minutes estimated was still underway after nine minutes when I cancelled it.  It found no errors up to this point, however.

  Processor: Core i5 750
  My motherboard is an Asrock P55m Pro
  HARD drive: Western Digital Caviar Green 1 TB
  4 GB Ram 1333 Gskill
  Gigabyte 4550 video card

  I tried to roll back the audio driver and reinstalling one that worked, but no help.
  Tried to install the latest video driver, but no help there either.
  Tried to adjust the power of savings in the bios settings, but no luck

  I see many others have trouble with Windows 7 doing audio choppy, but they seem to be running realtek audio. Mine is VIA.

  Any advice/help/suggestions?

  Thank you.

  Okay, I went back and did another system restore to an earlier date, and everything was going well for a few boots.  Then she went and made a few updates, and the problem came back.

  The problem seems to grow after an attempt to install the following updates through Windows Update (and fails after every restart):

  1 - other hardware - Microsoft HID Non-User Input data filter (KB 911895)
  2. definition update for Windows Defender - KB915597 (definition 1.69.301.0)

  Other things, that he did...

  3. I have a Microsoft Lifecam VX-5000, and installed the software for it because I changed the USB port
  4. I had several errors with my Microsoft Wireless Multimedia Keyboard 1.1 and mouse.  I had to disable these updates last week, because they never properly install and keep trying to reinstall on each reboot:

  5. Microsoft - Input - Microsoft USB double receiver wireless keyboard IntelliType Pro)
  6. Microsoft - Input - Microsoft wireless receiver double USB mouse (IntelliPoint)

  Cripes, I bought Microsoft Products assuming that they would work well with Windows, and BOY was I wrong!  I got that grief of this keyboard, here and on XP prior agreement.

• [SOLVED] SX10 TC7.3 audio and video during the call

  Hello

  I have a very weird question with a sx10 (TC7.3.0) endpoint. When I make a call to an another sx10 (TC7.1.4) then lights work fine and call is connected but there is no audio and video. It doesn't even when I give the word to some external video endpoint of a different type. I noticed that there is no news audio and video receiver but transmit codecs and other info seems correct.

  Hope someone can help me solve the problem.

  More info about my solution:

  I use CUCM with VCS - c and VCS-E. All the end points are saved to CUCM. I have 16 SX10 endpoint with TC7.1.4 and a TC7, 3, 0. I think that the upgrade of all the endpoint to TC7.3.0 is not the solution, because there are also problems with all other enpoints of types.

  Hi I have this problem too.

  You have a firewall between the endpoint and VCS - C? I managed to solve it by allowing the VCS - C and end point firewall rule.

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Very bad audio and video performance

  I have a Pavilion dm1 laptop running Windows 7.  When I got all first the machine audio and video performance was very good.  However, towards the end of last year the performance for audio and video has become extremely slow.  Still, the sound stutters even without video.

  I used the tools to clean the registry, updated (or verified) all drivers I can think, but nothing has not improved.

  Maybe related, but less to worry about because it is necessary that in rare occasions, boot has become very slow too.

  I think I have tracked down a part of the problem by chance.

  Normally, I start my DM1 when connected to various devices of office as keyboards etc.  These are all plugged into the USB ports.  As the boot begins there very long delays in the process.  And when the boot ends stuttering audio and video as described.  However, if no USB device is attached during the boot process, start happening quickly and the audio/video all work fine.

• Mix audio and video down? (no export)

  I was wondering if a user can MIX down audio and video without video exportng and reload again in the project...

  Also if anyone can tell me if the leaders of the scale are of any use outside their use as marker, for example may control playback within a certain range? Forgive my loose terminology.

  

  Certainly!

  When you say mixing, you hear to raise the level of the volume in some places and lowering in others? This was done using audio keyframes.

  Keyframes for audio can be done directly on the timeline. Just select a clip and position the playhead CTI top, and then click a keyframe in the header of the track, to the left of the audio track. This will create a keyframe to the position of ICT. This issue will increase the volume and lowering it would decline. You can create and position as keyframes that you need to mix your audio tracks.

  Regarding your problem of reading, you can isolate which sector you edit, make or exit by placing the work area bar (the light gray color bar that runs along the ticker on the timeline) so that it covers only a part of your project.

  (I see you've ordered my books, Carlton! Good for you! These and many other topics is covered quite well in them.)

• audio and video issues

  Hello
  
  First of all, let me say that cocomo is large and has already turned several heads to my company. We hope a reasonable price system.
  
  Secondly, in the white table, is it possible to download an image in there?
  
  Third, I've just started playing with cocomo. I have tried a few examples and one thing that always comes errors when audio and video is used. This happens with the defaultpods and examples of webcam... I get an error, it's prob. a step that I have missed, but during loading, I get these errors... Any ideas what I'm missing? Thank you!
  
  
  ReferenceError: Error #1069: nearID property not found on flash.net.NetConnection and there is no default value.
  at com.adobe.rtc.sharedManagers::StreamManager/createStream() [C:\work\main\connect\cocomoPla yer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:662]
  at com.adobe.rtc.collaboration::WebcamPublisher/createMyStream() [C:\work\main\connect\cocomo Player10\src\com\adobe\rtc\collaboration\WebcamPublisher.as:1028]
  at com.adobe.rtc.collaboration::WebcamPublisher/publish() [C:\work\main\connect\cocomoPlayer1 0\src\com\adobe\rtc\collaboration\WebcamPublisher.as:645]
  
  and
  
  ReferenceError: Error #1065: flash. media::SoundCodec Variable is not defined.
  at com.adobe.rtc.clientManagers::MicrophoneManager/get selectedMic()
  at com.adobe.rtc.clientManagers::MicrophoneManager/set _1703516469micIndex()
  at com.adobe.rtc.clientManagers::MicrophoneManager/set micIndex()
  at com.adobe.rtc.clientManagers::MicrophoneManager()
  at com.adobe.rtc.clientManagers::MicrophoneManager$/getInstance()
  at com.adobe.rtc.sharedManagers::StreamManager/findCodec()
  at com.adobe.rtc.sharedManagers::StreamManager/onUserRemove()
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at com.adobe.rtc.sharedManagers::UserManager/userRemoved()
  at com.adobe.rtc.sharedManagers::UserManager/onItemRetract()
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  to com.adobe.rtc.sharedModel::CollectionNode/ http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItemRetraction()
  to com.adobe.rtc.messaging.manager::MessageManager/ http://www.adobe.com/2006/connect/cocomo/messaging/internal::receiveItemRetraction()
  at com.adobe.rtc.session.managers::SessionManagerBase/receiveItemRetraction()
  

  Thanks for the quick responses!
  Everything is working well now, I was using player10 CFCS, once I changed my settings it worked.

• I accidentally blocked play audio and video on the BBC website. How can I unlock it?

  Today, a new video palyed often opens the door to a range of other unwanted videos.
  When my cursor hovered over this video window, engine block sign will appear in the upper right. I clicked on it, thinking that he would block the Stream of videos. Instead, who had arrested ALL the audio AND video games I can get on the BBC website.
  How can I unlock it?

  Hi, please see under the permissions tab and check the setting of the Flash - Page Info window - see technical details on the page you.

  If you are using an adblocker as Adblock Plus, also look at options/filter preferences.

  Either way, you have several version of Shockwave Flash - the oldest should be deleted - How to uninstall the Flash if necessary.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• iMac 7.1 displayport switch audio and video?

  Hi all

  My family would like to connect his iMac 7.1 2.4 Ghz Core2Duo until his TV downstairs, and I was wondering if the displayport located on these iMacs can transmit video and audio through, if we were to get a displayport HDMI adapter. Thank you

  The computer is about 10 years old, this vintage iMacs didn't have the ability to cross the Mini DVI audio & video port. The computer would need to discreet cables for audio and video.

• Final Cut Pro has a higher resolution audio and video to iMovie?

  Final Cut Pro has a higher resolution audio and video to iMovie?

  IT can have. If you put in higher resolution to begin with.