Qosmio F60 - BD DVD Player read DVD only if the theme is one of the aero themes

Similar Questions

• I currently have version 15.3, Adobe Reader can only install the previous version? [Android]

  I currently have version 15.3, Adobe Reader can only install the previous version? If no update on 15/11/2015. If so, please write where and how?

  Hi ventorr,

  15.3 drive is the latest version for Android OS.

  The previous version can be available and downloaded here:

  FTP://FTP.Adobe.com/pub/Adobe/Reader/Android/

  Let me know how it goes.

  Kind regards

  Ana Maria

• Re: My Qosmio F60 - 11f is VERY SLOW and stuck all the time

  Hi everyone :)

  I have a qosmio f60 - 11f with 2.26 to 3.3 with turbo i7
  6 GB of Ram
  640 GB HHD
  1 GB Nvidia GT330M graphics

  the problem is that since I bought it and its slow I don't know why!
  Now the laptop over 14 months and I did a lot of recovery time because of problems and stuck, I him.
  last day I did the cover and I noticed that the laptop is becoming slower!
  It takes about 5 minutes to get started! not only that, after started and open any folder you will notice how slow it is. Even in the videos I can't open it because the laptop will be stuck and play the video very very slow!
  Please help me.

  Hello

  First of all I recommend to check the HARD disk for disk failure HARD errors that may affect the performance of the computer, you should check the HARD drive using freeware tools one of the tools that I use is the Drive Fitness Test he has been published several times here in the forum and its really great software.

  If the HARD drive would be ok and if no error would be detected, then, I recommend disabling some processes that are not important for you in many cases different tools would be charged during the OS start process and these tools run in the background that slow down the operating system.
  Run msconfig and check the Startup tab
  Here you will see all the programs that are loaded at the beginning, you can uncheck the tools is not necessary

  Note: If you are not sure what means the only process, use google and search in internet for more details otherwise don't disable this.

• Qosmio F60 - new SSD now will not appear in the BIOS or at the Win7 Installation

  I recently bought a new OCZ Vertex 4 128 GB Solid State Drive to upgrade my PC laptop Toshiba Qosmio F60 with.

  After that I installed it first of all, it has been detected immediately in both the bios and during the installation of Windows 7. However, for some reason any approximately 40% of the way through installation, the computer restarts and the drive has disappeared since the BIOS all together and now, after several reboots it does not always detect!

  Note that I already have the latest version of the BIOS installed on my laptop V2.70

  I'm not sure what I would do here and any help would be appreciated?

  Can you please set BIOS to default settings and check if the SSD is recognized in the BIOS again?
  > Please note that I already have the latest version of the BIOS installed on my laptop V2.70
  In my opinion it is not relevant at all.

• Windows Media Player 11 see only not the files on the mp3 player

  Windows Media Player 11 shows all files (albums, songs) that are on my mp3 player.  She acknowledges that the 7 GB is used, but shows only a single album. Before this problem, he would show albums on the device that had been deleted. Is it possible to uninstall and reinstall WMP 11?  Alternatively, welcomed any other remedies.

  Thanks for all this.  It is now time for me to show the egg on my face.  I never noticed the "Refresh devices" button under the menu of synchronization.  It proved to be that simple, but not until I had spent all my elbow several times, installed a few unsatisfactory alternatives to WMP and visited I don't know how many sites looking for a response.  Pretty well, I came across the option "refresh devices."  Promotes perseverance, I guess.

• I'm trying to convert a PDF to word, but keep getting a message reader saying only has the ability to access this service

  I'm trying to convert a PDF to word document, but get a message that says reader doesn't have the ability to access this service.

  I have done this many times before, but seems only the last days he began to happen...

  Sue

  Hi suee63752152,

  Make sure that you have the latest Adobe Acrobat Reader DC (Adobe Acrobat Reader DC install for all versions) installed on your computer to use the services to create a PDF file as the old version of Reader support any more.

  Alternatively, you can use services online at https://cloud.acrobat.com/convertpdf

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Disc and DVD player read not only draw message get open no disc in the drive, again with the same results.

  Sought to follwed and previous forum information steps to unload the upper and lower registry filters but none are included.

  Have you tried devcon in back and get the followin message "devcon is not recognized as a builtin or external operable program or batch file."
  'Fix It' have tried without success
  Bought new dvd but still get the same results.

  Hello lyneham5155,

  Thank you for using the Microsoft answers Forum

  When this disk is listed in your device manager and you view the properties give any particular error as code 39 or code 10 code? Article below may help determine what the issue might be or helping to solve completely. Sometimes, the stack of filters in the registry is corrupted by software that is using the drive for some actions, such as write applications or multimedia CD or DVD. Take a look at the article below and see if it helps you solve your problem.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio F750 - Blu - ray player - is unable to apply the patch

  When I apply the disk TC30422300A - Toshiba Blu - ray player patch V1.0.0.299_A I get the message "Can't find the player" even if the player is present and functional.
  I've updated to Win 7 Ultimate on this machine.

  Is there a work around or a born Player I can reinstall?
  I can't do a full restore as will erase everything. Is there a way to extract only this program since the recovery DVDs?

  Thank you.

  Sorry, mate, but I can not follow you

  This patch do you mean?

  Download Toshiba 1.01.299_A Blu - ray disc player software also since the Australian driver Toshiba page:
  http://www.MyToshiba.com.au/support/computers/Qosmio/F750/pqf75a-02m00q/download?OS=25

  Check it!

• PC laptop Envy 17: Envy 17 laptop PC fingerprint reader works only after the start

  The fingerprint on my Envy 17 reader reads only a fingerprint the first time that I connect once the system is booted (after shutdown or restart). From time to time, it will read once the system is locked, but that is extremely rare. I put the system in place using my MSN account and also configured SimplePass with default settings. SimplePass version is 8.00.57.

  I looked on several other issues in the forum and did not find something like this. Other issues reported when related to player doesn't work do not, for example. I found a few link in some messages describing such tasks that go back to a previous version of SimplePass.

  I don't know if it is related to my problem or not, but I noticed that the drive light sometimes flashes a sequence once the system is running. It seems that when the light flashes, it will not be read. It stops flashing when I placed my finger on the reader. (I think that the typical sequence is 3 flashes, pause, 1 flash. This cycle repeats.) This isn't always for that well, and I have found no correlation between the flashes and the measures taken after the initial logon.

  I made the fingerprint reader driver, rather than later.

  I uninstalled SimplePass (after update to the last with no luck) and the drive works fine now. I use RoboForm for my password management and it supports using the fingerprint so I'm covered there. I guess it should be renamed "SimplyNoPass."

• Qosmio X 500-12 q - reader of fingerprints and the Webcam disconnects

  Hello

  I have a Toshiba Qosmio X 500-12 q since its release and I have a problem: the webcam and fingerprint reader disconnects all the time, I'm always having to reboot to reconnect. It is particularly troubling for the webcam. I hope to find a solution to this problem...

  Thank you

  Hey Buddy,

  When this happens exactly? Have you started several applications they need for example like Skype webcam?

  Did you installed an additional firewall that blocks something on your computer?

  Don t know why it happens, but you can also try an update of the driver for the Toshiba page:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

• Qosmio F60 - 10K: Win 7 64 bit recognizes all the devices connected to the USB

  Hello

  I have a problem. I do not know this first run my Toshiba which was before 6 months or since...
  Some USB are recognized some are not, but many not a few USB are recognized I mean on USB, External hard drive USB too.

  I have 2 USB hard drive is recohnized 1 is not, btw... when I run Vmware XP he acknowledged all USB and my external hard drive all but in windows 7 a few USB are recognized, some are not...

  He finds something is attached to the USB but then don't say no driver, I tried it on other Windows 7 on another computer working USB and HDD external but my Toshiba Windows 7 64 bit doesn't work, btw... USB are good because when I turn on Vmware running :((

  And why I have no drivers on the support of the pilots then say no product, btw... Driver F60 - 10 K page no longer exist!

  Thank you, vfranges

  BTW... Sorry on English xD

  Hi vfranges,

  I put t have problems with the USB ports, but according to some other discussions here in the forum I recommend you to update the chipset driver.

  You can find the latest version on the Web from Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  Check this box!

• Qosmio G30 HD-DVD (PQ31): updated Value Added Package

  I wonder if anyone has noticed this. They offer a value-added package update dated 08/01/2008 my Qosmio G30 HD - DVD (PQ31). The file reference is vap - 20080108132320.zip. I downloaded and installed the utilities contained in the compressed file, but now when I boot my laptop with Vista Ultimate, what follows are reported as incompatible with my version of the system: Toshiba Power Saver, Toshiba zooming Utility, Toshiba Wireless Hotkeys utility, Toshiba Raid Utility, controls of Toshiba, Toshiba Touchpad, utility, utilities Toshiba & finally Intel ProSet Wireless Driver.

  After checking the zipped file, I noticed that the installation files are named for the PQ-32 my PQ-31!

  Could this be the problem or Toshiba is not compatible Vista Ultimate? Your comments would be greatly appreciated

  PS I assume that this question should be addressed to Toshiba direct, but strangely, they fail to give an address for your comments.

  Zaki

  Hello Zaki

  Please don't be crazy about me, but what you wrote is noting but totally absurd. There is no difference between the versions of Vista and all Toshiba designed tools, utilities, or packages are universal and can be installed on every version of Vista.

  Qosmio G30 is quite long on the market and you are the first person who says something like that. I really wonder why?

  VAP is identical for both Qosmio models and there is no difference. PAxxx number is different but the platform is the same and there is no reason to make two different veterinary antimicrobial products.

  To be honest, one thing is interesting to me: How do you get the following are reported as incompatible with the version of my system?

  Before you try to install already preinstalled VAP should be removed first. If you do a clean install of Vista Ultimate there should not be any problems at all, just follow the order of the facilities.

• Can mogu skinuti Windows 7 Professional MSDN SP1 DVD only

  Can mogu skinuti Windows 7 Professional MSDN SP1 DVD only

  The forum in which you've posted is for English only. You posted in the Croatian language.  For international additional locations, please click on the following link:

  http://support.Microsoft.com/common/international.aspx

  See you soon

  Julia

• Qosmio F60 trying to return to the factory settings

  Hi all

  I recently purchased a Qosmio F60. When I started it upward and the preload Windows 7 has started to install, I clicked on the option for 64-bit. A few days later, after the installation of a few other programs I noticed in configuration/system board that windows was reported as 32-bit. (Yes, I'm sure that I chose 64-bit). He noted also that 4gig ram withonly 2.98 usable.

  First of all, can someone explain why this could be?

  I had not created a recovery disk because I planned to load the machine with all the programs that I use regularly and THEN create the recovery disk and image. However now that I see that windows is apparently loaded as 32 bits I want to return to the beginning and reload the windows preinstalled as 64-bit. I really need it to make full use of the suite cs4 Adobe. And I'm confused as to why only three-quarters of my ram is usable.

  I backed up the data (a little), I've created so far and the TOSAPINS file and put it on a USB key. What is the best way to restore it to how it was when I got it out of the box? It came with preloaded trial of Office 2007, and Norton, versions.

  If I go back to the system default Toshiba Restore Point will it take me back to where I re - load Windows? Or is it just restore point after installing windows?

  Thanks in advance

  ufoundlou

  Hello

  Can you please tell us what F60 (F60 - xxx) have you exactly.
  It is really strange that you have it with 32-bit because I know with certainty that this machine comes with 64-bit only.

  To be honest, there is no sense to install 32-bit on such portable high-end with excellent material. Please try to install the recovery image using HARD drive recovery procedure. Procedure is described on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please note:
  When you want to create the recovery DVD you will get recovery on that image if all applications that you will install in addition will appear not in this recovery image.

• Qosmio F60 - 14K - can't boot from SSD drive

  Hello

  Im trying to install a new SSD, but can't, because I can't boot from SSD disk, "Insert a system startup disk" works great as a USB key, even installed Windows 7 top and tried to boot from it, but with a bit of luck.

  I have not tried to switch between IDE/AHCI, but that, because I don't have this option in BIOS. I think I've tried everything I can test, all the tips/help would be much appreciated!

  And so the part of the BIOS by joke to call bios all you can change the settings of the clock and the bootorder more or less!
  Anywhy for more options?

  THX

  Henrik

  Hey Buddy,

  I'm a little confused about your ad m... You wrote that you have installed Windows 7 on it, but you can t boot?
  You get an error message during installation or what exactly is going on?

  Have you ever tried to restore the factory settings of the recovery on new SSD disk?

  Hmm I put t know what BIOS options you want but I think Qosmio F60 BIOS has enough options.
  Normally with the BIOS default settings everything works fine.