Qosmio F60 - language changed after installing Windows

Similar Questions

• Qosmio X 300 BSOD after installing Windows

  Hello

  I have a laptop x 300-11 t Qosmio.
  I tried to install Windows XP by "slipstreaming" good hard drive SATA/RAID drivers and others on the installation CD. Windows through the installation process, but when it restarts for the first time, the sign of Windows load for about 1 second and then gives me a blue error screen (HDD error)

  STOP: 0X0000007B (0XBACCF524, 0XC0000034, 0X000000 0X000000)

  The BIOS also doesn t allow me to change the compatibility thing AHCI mode is
  Don t know what else to do?
  I need to integrate the SATA/RAID driver specific to the installation CD?
  Boot sector virus?
  Can it really be installed?

  Help, please

  I'm pretty sure that you have installed the wrong driver SATA/RAID.

  On the Toshiba site are no XP drivers available so that you download on Intel: [www.intel.com]
  You need the Intel Matrix Storage Manager.

  The Microsoft Knowledge Base explains to this might be a bad driver:
  http://support.Microsoft.com/kb/324103

• On Qosmio G30 black screen after installing Windows XP

  Hello world
  I want you help me solve my problem.
  I have a Qosmio G30E - 148 and when you install a new program, the BSOD had been posted. prevents me from having access to windows from
  normal mode and safe mode.
  Then I installed a new Win XP manually and when trying to install the screen to black color display (nvidia geforce go 7600) driver and I turn it off
  safe mode in order to use windows.
  Another favor, I need a driver for ethernet controller and multimedia video controller because I can't find them.

  Thank you for all.

  Hello

  I have several question for you:

  -What system was installed before? Windows Vista?
  -where you have downloaded the display driver? On the Toshiba site?
  -You can find all the necessary drivers in the section download the drivers on the Toshiba site-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
  Simply choose XP MCE as an operating system, the drivers are the same as XPPro/XP

  Hope I could help, if you have additional questions just ask. :)

  Greetings

• Qosmio F50 - Unkown devices after installing Windows 7 64 bit

  I just did a clean install of Windows 7 64 bit and there is unknow device (ACPI\TOS6205), (ACPI\ENE0200) and MULTIMEDIA CONTROLLER.

  Can someone help me?

  Thank you

  > unknow device (ACPI\TOS6205)

  Looks like you need a test driver of Toshiba Bluetooth to download here:

  http://APS2.toshiba-tro.de/Bluetooth/index.php?page=download

  > (ACPI\ENE0200)

  I think you should install infrared driver:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  > MULTIMEDIA CONTROLLER

  Install a sound card driver

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Does not fingerprint after installing Windows 7

  I bought 3 items of T500 with installed Windows 7 Home. With this OS footprint scaner worked properly.

  After installing Windows 7 Professinal, fingerprint reader does not work. All instaled divers. There is no error in DeviceManager. But when I run the software of fingerprints, it is said that scanner is not lit.

  Make sure that the installed driver is actually the one that came with the Lenovo Fingerprint Software and not the one that you got from Windows Update. I've seen similar problems several times where Windows 7 is installed and get fingerprints from windows update driver/software and the software Lenovo to fingerprints do not work because some parts of the software, I got from windowsupdate is left on the computer.

  Which version of the driver of the fingerprint reading is installed on your computer?

  You can try uninstalling Lenovo Fingerprint Software and restart. Then, after the reboot if there is still a driver installed for the fingerprint reader in Device Manager, right click and select uninstall and also check the box that says to delete the driver. You may have to restart again. If you had several drivers fingerprint installed you may need to repeat this step twice. So when Device Manager shows the fingerprint with no check reader driver installed if you have any software fingerprint authentec or authentec truesuite installed under "uninstall or change a program". If you find any uninstall and restart. If you can successfully eliminate all the reader of fingerprints in the device should be listed in Control Panel with no driver installed, you should find any substance of fingerprints or biometrics. Then try to install the Lenovo Fingerprint Software.

  -gan

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)