Qosmio F60 - USB ports stopped when I'm with them

Similar Questions

• Re: Satellite L500 - USB ports stopped when I'm with them

  Satellite L500 running Windows 7.

  So far, I deleted the drivers of USB devices and the mouse through Device Manager and reinstalled at the beginning upward. strange thing is when I do that the mouse devices becomes operational during installation then become inactive at the end... This leads me to believe that he may have been the related power management. I chose high performance as profile of power favorite and disabled USB selective suspend setting, once more with no joy. I find that really odd how USB ports work in detecting the device and asking the right driver update... ideas?

  > So far I deleted the drivers for the two USB and...
  Do you have which driver removed for USBs?

  Satellite L500 is not the latest model cell phone, so I would like to know since when you noticed this problem.
  Are you using the original version of Win7 you have with your laptop (recovery image)?
  Have you tried reinstalling the chipset utility?

• USB ports stopped working unexpectedly

  Hi, I am currently on "Toshiba Satellite C655"run"Windows 7 Home Premium". It's a laptop of 2009 model (2 GB). Last night (24/02/14) my USB Ports stopped working, they have been and continue to read anything every time I have to plug my devices. I usually only connect a cooling block and a USB mouse to the computer. They worked perfectly until I disconnected the. When I reconnect them, they work momentarily, and then I hear the beep sounds when you eject a device. I tried to connect several flashdrives, a printer, and one I tried the following hotfixes:

  Note: The order of numbering has nothing to do with the order, I tried to apply each patch unless specified elsewhere. This computer had Windows 7 Home Premium REINSTALLED at some point. Just for your information. This message was made when there are others with the same problem is due to the fact that no solution not specified by Microsoft Technical Support or the Microsoft community were effective.

  1) System Restore to the last known point, where they worked (and still). (Point restoration @ 15/02/24)

  2) Windows Update

  3) turn off the computer, disconnect the battery and the power supply and holding 'On' button for 10seconds.

  (Note: whenever I turn on the computer now they work only for a moment, usually from 60 to 180 seconds.)

  (4) Start > research ' Device Manager '> "De Bus USB controllers" Expand and turn off and restart the computer. They are re - activate automatically but my problem persists.

  (5) download and run "Microsoft FixIt.WinUSB... ", on the 1st, I had a problem with devices not updated. But I actually watch updates by using Windows Update and ""searching for hardware changes "" on USB Bus controllers "." I then did a 'System Restore' and now Microsoft FixIt found no problem but the USB Ports don't always work.

  (6) will ' services.msc"and change the Startup Type of Manual to Automatic for Windows install and restart Windows."

  7) regedit

  8) sfc/scannow

  I am really lost with this problem now. My laptop works and worked perfectly fine until this problem occurred. I have fixed minor problems with computers before, but this is a bad joke for me now. If someone could please help me with this problem I would appreciate it a lot. Thank you very much.

  Thank you for your help, but I discovered something funny on my computer. My cooling package (product name: Laptop Cooling Pad NSB;) HYCF-6181-2 model number) is to disable my USB ports when I plug. If I leave it unplugged and restart my computer, my USB mouse is still working on a port. Also tried using my USB and other devices. The problem is my block of cooling that strangely disables my USB ports, whenever I plug. Thank you very much for your quick response, fortunately the answer might help me in the future. For now, I have solved my problem.

• All USB ports stopped working Windows 7

  Windows 7 Pro. All USB ports stopped working.  When I plug a usb card, windows makes the sound as it connects and the card gets power (light).  I see the map appear in disk drives in Device Manager.  The player does not display in windows Explorer or disk management.  In Device Manager, it has an exclamation point and says that the device cannot start.

  Strangely, I have a USB keyboard and mouse and they work very well.

  It's just the USB drives and chips and SD cards that are not displayed.

  I have:

  Reinstalled the drivers USB MB

  Flashed the BIOS with the latest version

  Tried to install the older USB drivers

  Tried to let windows find the driver.

  Still does not

  None of this has helped.  I ended up formatting the HD and reinstall windows from dvd.

  This revealed that my USB multicard reader was bad.  When I unplugged the problem disappeared.

• Satellite P850 - right USB ports stopped working

  I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change.

  Anyone has any ideas.

  > I tried to uninstall and reinstall, no change.
  What have you tried to uninstall or reinstall?

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• USB ports stop working after windows 7 updates (April 12, 2011)

  After application of the 12 updates successfully (KB890830, KB2508272, KB2506223, KB250212, KB2508429, KB2507618, KB2509553, KB2503658, KB2506014, KB2491683, KB2511455 and KB2446710), my USB ports stopped working after restart. I get this description of Device Manager: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I restored the functionality of USB ports by doing a system restore before installing updates.

  What should I do? Ignore ALL updates future windows 7, which leaves the system vulnerable? Help is appreciated thanks.

  I solved this.

  Device-USB controllers-online standard uninstall online Manager pci improved to (do it twice) usb host controller, and then the scanner hardware change and let the win7 to reinstall the drivers.
  Updates were corrupted somehow the drivers, you need to fix manually.

• Qosmio F60 series not stop correctly.

  I bought this laptop Qosmio F60 series about two weeks, every time I have for the last week he was not able to close properly.
  When I try to shut down it disconnects, the screen goes black them the fan runs squarely! When I try to put just the hibernation of machine or sleep it will carry out the fine job, but when I start from that point once again it breaks/jam on screen the journal password.

  Can someone help me please?

  Hello

  Maybe did you install additional software that runs in background und blocks stop?
  Have you noticed that from day one with the factory settings?

• SQosmio G50 - 10 H - one of the usb ports stopped working

  Hello forum,.

  I have a BOUNCING problem with usb ports on my qosmio g50-10 h.
  There are two ports on the right side of the machine and I have 2 self-powered 7 centers of port (usb 2) attached to these.

  Every now and then to stop it from ports and of course all the parts a unregcognised, not found.
  I get error messages saying unregognised device or usb device stopped working or windows stopped device etc.

  Unplug the hub and repluging it ususally actually come back to life.

  any ideas?

  Stafford

  Hello

  Have you tried to connect devices directly to the USB port?
  Try this and see if the USB device is disconnected, as you mentioned that using the external USB hub.

  Generally speaking, it is difficult to say what might cause this
  You could try updating the chipset driver.
  Of course, you should also check the USB port settings, and power management options for economy.

  In device manager-> USB root & hub-> properties you could disable for unique energy saving USB ports.
  This also on Win 7 power management.

• Satellite L850 - USB Port stopped working

  Hello guys,.

  first sorry for my bad English, im from Germany.

  My new clearly L850 satellite has had some problems with sound-Port USB.
  I think it's the Usb3.0 Port on the left.
  While I'm workin with an external keyboard, the USB Port has stopped working and cannot identify the keyboard.
  All other devices that I put there, are out of order, but when I put an external hard Powerdevice with separate data for laptop, that he is there something ist connectet, but can't identify it.

  I have try all troubleshooting close it, like install new drivers, disable ports and restart and any kind of it.

  So maybe you have another tip for me?
  Or do I have to bring my laptop to the store for warranty?
  A Windows 8 64 bit on it, maybe it will help.

  Best regards, neothic

  Have you tried reinstalling the driver USB 3.0? Please try and check the functionality. If this will not help I recommend you do the ultimate test: back up all your data and reinstall Win8 using recovery media. Test it with clean OS preinstalled and factory settings.

  In the worst cases, you should contact the nearest Toshiba service provider and ask for help.

• My USB ports stopped working

  My USB ports just stopped working all of a sudden. For this reason, I can't print, download images, load my i - pod, etc.. What can I do to fix this and get my ports working again?

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ==========================================

  If you have tried ALL the foregoing Installation of upgrade/repair in Place could help. This allows you to keep
  programs and data backups however redundant are always a good idea. (It is less likely to help
  If you have not tried all the above methods as the same parameters and conditions exist).

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

• Windows Vista - why my usb ports stopped working, and how do I fix them?

  My 3 usb ports worked very well, but a few days ago they just stop working.  I updated the drivers even though my drivers were already later.  I even tried to update the drivers.  Nothing seems to work.  Can you help me?

  Hi WillisPop,

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  Use Device Manager to disable and re-enable all the USB controllers

  This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  1. click on Start, type Device Manager in the start search box and press ENTER.

  2. expand Universal Serial Bus controllers.

  Note: you may scroll through the list to find this point.

  3. right click on the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  4. repeat the above steps for each controller USB is listed under Bus USB controllers.

  5 restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  6. check the USB device to see if it works.

  You can also check out the article below for more information:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Desktop Dell Optiplex 390 computer. Each USB Port stopped working

  Hello!

  I'm at my wits end. Turned on my Optiplex 390 a few days ago and found that my keybord or my mouse was working. I tried all the usb ports on the front and back. When I plug inn the keybord the numlock, capslock and scroll lock lights upp for half a second, but it was not detected.

  I can't get into the bios. as my keyboard is not detected at all. start or windows or linux or back or Freedos.

  My Bios is A01. Is trying to update, but you know no keyboard, I tried to reset the bios by the rider and take out the battery for a few hours. to no awail.

  Can anyone think of what the problem might be? doubt his material because none of the usb ports work and that they should be on different controllers.

  Manual says that the 390 office has an intrusion switch. See the manual for the location of the connection on the motherboard and the trace of wire to the switch.

  Blue button / stop more amber LEDs 1,2,3,4 is not an error code documented.

  Are you sure that you have disabled the BIOS as speed tells you how?

  You will have to strip to bare essentials, but more like the failure of the motherboard.

• Satellite A200 - USB Ports stopped working

  Hallo, I am DESPERATE for help, please.

  I have a Toshiba laptop Satellite A200 series with 32-bit Windows.

  My USB ports give me major problems.

  I use a USB Internet Modem on multiple computers and it works fine on all computers, including Toshiba.

  A month earlier, Internet USB would suddenly and constantly disconnect itself from the Internet, when I use it in the USB one. When I use USB port two, he recorded no more. The port does not have the device.

  Two USB ports work well when used by other USB products.

  I had always used Internet USB into the USB port, with a cooling for my laptop fan, USB 2 port. Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I did the following:

  1. start an anti-virus
  2 uninstall, re-install and update all the drivers for the USB, chipset famlies, Internet Modem ports, EVERYTHING.
  3. I checked with my Internet provider, the problem lies in my PC, not them.

  I don't know what to do, I'm tired.

  Help, please!

  Now, when I insert the cooling fan, USB Internet disconnects and will not register, at least I have remove fan, remove and reinsert the USB Internet.

  I think that it is a problem of USB power.

  The USB 2.0 port provides 500mA, and in some cases more than USB ports can be connected to the same power supply to the motherboard.
  In case the USB device connected (in your case fan) would need more than 500 ma, it could be that other USB devices do not work correctly.
  I recommend you go to Device Manager and select the properties of USB controller.

  The last "Power Management" tab contains the option to turn off the device to save power.
  This option should NOT be checked. It should be disabled.

  Check it out.

• Qosmio G50 - 12U - display stops when 'Welcome' appears

  Display U Qosmio G50-12 problem

  When I start the computer (Windows Vista) start page shows Qosmio and the boot process proceeds, but around when the welcome message the display panel stops.

  When I connect an HDMI cable between the computer and the TV, the display on the TV.

  When I hit FN + F5, the display fails to return to the display of the computer Panel.

  If I stop and restart the computer several times the m slipped by pot luck the computer display OK. But then, I am reluctant to shut down the computer that I lose the display again.

  Hello

  It seems that the internal display has started to malfunction.
  I think that its display problem, because the video output to an external monitor/TV is working properly.
  This would mean that the graphics card is OK.

  If the graphics chip is OK, there is just a game (or two) that might not work: his Billboard or a part between the monitor and the motherboard. something like a cable or an FL inverter, but I think that its display.