Qosmio F750 - Media test failure

Similar Questions

• Re: Qosmio F60 / 05 M - PXE - E61 media test failure and hard disk failure

  Hello

  My problem is the computer freezes often and has problems with windows Explorer. Also, it will freeze when in games. I don't know if the issues are related, but after freezing when it starts to reboot, it will come with a black screen reading;

  PXE - E61: Media test failure, check cable of

  When I press on no matter what happens with the same message. If I turn off the laptop by the power button and give it some time before turning on it gives me the option to start windows in safe mode or normal if I choose Safe mode, it does not start. Also when I run the toshiba PC diagnostic tool, the hard drive failed the test. It gives me no explanation.

  This problem has happened several times in recent weeks.

  The model is:
  Qosmio F60 / 05 M PQF65A-05M02W

  Any help would be appreciated

  Thank you
  Mick

  Hi mick,.

  > Also when I run the toshiba PC diagnostic tool, the hard drive failed the test.
  It would be also my staff believes that something is wrong with the HARD drive itself, I mean if the computer attempts to boot the HARD internal access and Windows boot disk, but if the computer can't find the HARD internal disk, it tries to boot from LAN

  According to me, please contact a service provider authorized in your country. Guys should check your HARD drive and replace it if necessary.
  In addition to backup all your data if you didn t it yet. Therefore, you can use an external USB HDD.

• Satellite L450D - 13 X does not start the system - PXE - E61: Media test failure

  Hello

  I turned on my laptop after only a day and it will not load
  As a first step, he said start the system restart or start normally,

  I chose startup repair, but it does not complete the repair.
  It now comes with a repetitive screen with PXE - E63: media test failure, check cable of
  PXE - MOF: exit ROM PXE

  I tried Googling the answer and go into the BIOS menu and to the section boot but I can't seem to change anything at work.

  There are, and exclamation mark in front of what I think is my hard drive on the screen

  ! HDD1/SSD1 TOSHIBA MK2555GSX-(S2)
  CD/DVD HL - DT - ST DVDRAM GT20N-(S4)
  FLOPPY DRIVE
  LAN

  I have nothing in the disk drive and I don't have a recovery disk.

  Any help would be appreciated

  Thanx

  Leon

  Hello

  For me, it looks like a malfunction of the HARD drive and so the BIOS can not find a bootable device and goes to the last possible bootable option which is LAN.

  The exclamation mark in front of the HARD drive indicates that there is a problem with the HARD drive so I think you need to replace the HARD drive and you need to reinstall the system.

  PS: What laptop do you have exactly?

• HARD drive failed on the Satellite 5100-603 - PXE - E61: Media test failure, check cable

  Hello

  my laptop enter to the BIOS and tell me 'Intel (R) Boot Agent Version 4.1.03 Copyright (C) 1997-2002, Intel Corporation.
  PXE - E61: Media test failure, check cable
  PXE - B0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  and I started to install windows, it tells me 'hard disk without work... '. »

  Help me please

  Hello

  Sorry but I don't understand what kind of help you want. If the HARD drive is faulty, you should exchange it.
  Moreover, what model of laptop do you have?

• Satellite L300 - PXE - E61 media test failure

  Today, while browsing the Internet, my laptop decided to randomly cut to a screen with this error message:

  Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07 (080320)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For realtek RTL8101E/802E PCI - E Ethernet Controller v1.07 (080320)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM.
  No boot device - insert boot disk and press any key

  I have absolutely no idea what it means, and I use never no ethernet cable because I have a Wi - Fi connection, but he is relentless. I went through F2 and F12 and all settings are perfectly fine. Order of the BIOS is fine with the HARD disc on top.

  What should I do?
  Best regards

  Hey Buddy,

  If you have tested the HARD drive in a box of another and external HARD drive laptop without success the case is clear: the HARD drive needs to be replaced because it s defective!

  I can understand that you want to recover your data, but what do you do if you are not able to access? In this case you need assistance, a special data recovery lab, but it is not cheap and costs hundreds of dollars.

  I m wondering that you don't have a backup. Have you never tried to do it or thought it would be useful?

  Last but not least a new HARD drive can be ordered at a service provider authorized in your country or each computer store. Satellite L300 supports SATA 2.5 hard drives.

• Portege Z30 - A - PXE Media test failure, check cable of

  Hello everyone,
  Here's my problem: two days ago my Toshiba Portege Z30 - A turns off suddenly, and when it has reactivated the instead of displaying the usual Windows Home page at he showed a black screen with these lines written:

  'Intel(r) Boot Agent GE v1.5.43
  Copyright (C) Intel Corporation 1997-2013

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press any key when ready... »

  And every time I turn it on it displays this screen again.
  Why is it like that? What should I do?

  Thank you very much
  Stefano

  It seems that the system does not recognize your ssd more. Usually, the hard/SSD is the first bootdevice and whether it is empty or does not exist, it will jump to usb or networkboot. PXE = networkboot

  Try to start with a live-stick and the check if you can access your SSD. Also see, if the bios/efi does not recognize the drive.

  Worse: all your data is lost... (I hope you have a backup)
  the positive: this question must be covered by the guarantee! If you are still in the first year and registered for the guarantee of reliability, you get your laptop repaired and all your money. xD

• Tecra M2, Media test failure, check cable of

  Hello
  I ve got a Tecra M2 with the following problem.

  It makes no difference to click on an icon, format a drive, from Internet Explorer or simply begin to defragment my HARD drive.

  "Absolute coincidence, the laptop restarts and displays the failure message: PXE - E61: Media test failure, check cable"...

  But not all the time do default message appear.

  Does anyone have any idea?

  I seem to be a contact isolate. I hope well shake before use ;)

• Satellite Pro C660-v10 does not start: pxe - e61 media test failure

  Hello

  laptop was dropped accidentally, worked very well at the beginning but now does not.
  Press f12 for the boot menu, the screen says,

  PXE - e61 media test failure - check the cable.
  PXE - m0f too; output
  PXE rom operating system not found. Please can someone explain what this means?

  > pxe - e61 media test failure - check the cable.
  > pxe - m0f; output
  > pxe rom, system of operation not found.
  > can someone please explain what this means

  Hello

  The PXE error in most cases because the laptop can not boot from a CD-DVD or HARD disk drive and going to the LAN.

  There's maybe one losing a contact between the HARD drive and controller HARD drive.

  Select this check box. Open the HARD drive Bay and check if the HARD drive is properly connected.

  If the HARD drive would not be recognized even if the connection is OK, then I would say that your HARD drive is defective and must be replaced.

• PXE - E61 MEDIA TEST FAILURE

  Hello, sorry if this is in the wrong category, but my notebook beloved seems to be his death.

  He had a minor fall while it was closed and when I turned back on it I could hear an in clicking on its pretty near the hardrive. He kept clicking.

  When the screen finally came on I had a black screen with the message in the sense of «series» Realtek PCIe GBE Family Controller V2.38 (24/12/10)
  PXE - E61 Media test failure, check cable of
  PXE - MOF: Exit PXE ROM
  Restart, and then select the appropriate boot device
  or Insert Boot Media in some boot device and press a key.
  Intel UNDI, PXE - 2.1 (build083)

  Im not an expert, but I assume that something broke when I dropped it.
  That is why the rattling and the "check cable" bit.

  I rely on my work laptop please suggestions, or if anyone knows what I have to do to make it work again, I would be very grateful.

  This message appears if the laptop cannot find the boot device and finally tilt the option to boot from LAN.

  It seems that HARD drive failures and so the laptop will not start HARD drive system.
  In this case the HARD disk needs to be replaced and the system must be installed again.

  By the way: what model of laptop you have exactly?

• Portege R200 - PXE - E61: media test failure - insert system disk

  My Portege R200 PPR21E-00K00QEN computer means the usual stuff of toshiba: IE

  PXE - E61: media test failure, check cable of
  PXE - MOF outgoing PXE ROM

  Insert system disk in drive

  Now my model isn't a hard drive and I bought second hand, so I have no recovery disks.
  I checked the HARD drive and its seems connected properly.

  Would I need to buy an external drive and try a system disk or is there anything else I could try.

  Any suggestions or advice?

  PXE - E61: media test failure, check cable message appears because the laptop has attempted to boot from LAN.
  Why?
  Because it could not start the HARD drive, or another source like CD/DVD drive.
  Usually this happens because of faulty HARD drive.

  So how to fix?

  I think first of all you will need to replace the HARD drive.

  Since the Portégé R200 doesn't support CD/DVD drive, you must install the system using bootable flash USB stick memory or you would need to buy an external CD-ROM USB drive that would be compatible with protégé R200

• Satellite A210-1AS-PXE-E61: media test failure, check cable of

  Hello

  I had some problems with my A210 overheating a stop (even tried extra cooling), but since the last stop, I am now unable to boot, I get the following...

  for fast ethernet Realtek RTL8100E/8101E network adapter v1.02 (060529)
  PXE - E61: media test failure, check cable of
  PXE - M0F: exit ROM PXE
  operating system not found
  Intel UNDI, PXE - 2.1 (build 082)

  I assumed that the HARD drive is dead, although I don't want to get another, only to find it's something else like a bad cable... I removed the HARD drive and given the link suddenly.

  If someone could advise me before I go and buy another HARD drive, I would be grateful.

  ... also, if I don't change the HARD drive, my Vista recovery disc would work with the new drive or do I need a new copy of Vista?

  Thank you

  Hello

  Yes, it's a typical message when the laptop cannot boot from the HARD drive and switches to the local network.
  I think that your HARD drive is not present may be dead
  You can check the BIOS if the HARD disk is which are listed there.

  If the HARD drive is not recognized in the BIOS, then I would recommend this replacement.
  As far as I know it takes 2.5 HDD SATA

  Greetings

• Satellite L30-149-PXE-E61: Media test failure, check cable of

  Hello!

  My Toshiba Satellite L30-149 with the PSL35E-002002NS model number is equipped with a MK4032GSX drive HARD 40 GB, Bios V 1.90 and HP Windows XP Home edition.

  IT stops during startup with the text.

  For Realtek RTL8139 (x) /8130/ 810 x PCI Fast Ethernet Controller V2.13 (020326), PXE - E61: Media test failure, check cable PXE - M0F: exit ROM PXE, operating system not found.

  This occurs even if the disc is removed and seq. boot is changed so it should search the CD/DVD and even though the power and the battery has been disconnected for 15 minutes. If the power were during 20 hours them lights upward by DVD for a short so that at the next startup, but not if the power was turned off for a few minutes.

  Before he died, he showed the blue screen several times with diskerrors in the event log, and I was able to run/CHKDSK without errors a few times.

  Please advice how to reset the Fast Ethernet controller, not sure that a HDD defective only can cause the fault of I m.

  Thnx in advance
  Ben

  Hello

  I think that this is related to failure of HARD drive or lack of OS on the HARD drive.
  Is this message PXE ONLY appears if the portable computer is trying to boot from LAN.

  Means either the LAN was chosen in the BIOS as first boot device or operating system is not found on the HARD drive and so the BIOS automatically goes to the local network.

  So I recommend this audit in the worst case you will need to check if the new HARD drive would solve this

• Equium L10-300 - message "media test failure".

  Hello

  I'm asking on behalf of a friend. They recently, accidentally had a spill of liquid on the keyboard of their laptop Equium L10-300 which resulted in the message "media test failure" appearing on the screen and makes it so the laptop unusable. Apparently when the liquid was split open CD-ROM drive (coincidence?), while the player also "clicky" sounds when the case he pressed.

  Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Thanks in advance

  Hello Michael

  The liquid spited in Notepad is the worst thing that can happen.

  > Is their machine completely buggered now or maybe just the hard drive / liquid obtained in the drive? Are there recommendations for when such an incident occurs or just let it dry out and hope for the best?

  Why hard drive? I fear that the defective mainborad may be responsible for this message (IDE controller). Boyfriend sorry but it is just a recommendation, contact the service and let check the laptop.

• Satellite Pro L10 - I can't install Win XP - PXE - E61:Media test failure

  Hello

  I was wondering if any1 can help just bought a 2nd hand toshiba satellite computer laptop pro L10
  Model - PSL15E-00L0179I

  It has been wiped and when I charged it up it has developed in DOS, but won't let you enter any command all it says is -.

  PXE-check the cable of E61:Media test failure
  PXE - M0F: Exit PXE ROM
  Operating system not found

  If you press a key, she re - just starting, I loaded my XP installation disc but it will not auto run. You are able to F2 at startup but can't seem to find something that will help you use the drive.

  Any info is greatly appreciated and I have limited computer technical knowledge so just as easy to understand as possible thank you

  Dean

  Hello

  PXE - E61:Media test failed is displayed because the laptop is trying to boot from LAN.
  This can happen because the LAN option has been fixed in the first start position in the BIOS or because the phone didn t find any other sources bootable.

  In many cases, this can happen because the HARD drive was not recognized.
  Check if the HARD drive is visible in the BIOS must include details of the HARD drive in the BIOS
  If this isn't the case, then the HARD drive is unavailable due to hardware problem.

  It would also be possible that your CD/DVD drive cannot read the disc, and so the laptop can not boot from the disc.

  All these questions can be releated to hardware failure... ODD or HDD, or both...

• Portege M205-S809-PXE-E61 Media Test failure PXE - M0F error

  I replaced (what I thought was) a HD on my Portege M205-S809 failure (I was getting the error "PXE - E61 Media Test failure PXE - M0F").
  I put in the HD and turned on the laptop to get the same error.

  My intention was to reistall the BONES of the recovery Toshiba and DVD Applications/drivers, but I can't. I just keep the error each time that I reboot.

  I checked the BIOS and made sure he does not try to boot from the network (and reset the defaults, just in case). I tried a configured to boot from the CD first, but that didn't work. I rechecked the HD and it seems to be plugged in fine.

  Help! Thank you.

  Hello

  The HARD drive has been properly recognized in the BIOS?
  You see a few details of the HARD drive in the BIOS?