Qosmio G10 - 133 drivers for other devices

Similar Questions

• Need help - Y510 XP drivers for other devices

  Hi all

  I just formatted my C drive and put XP SP3 on it... After installing all the xp drivers available online... I can't always get all the drivers for the machine. I checked in the DEVICE MANAGER... and in the OTHER DEVICES section... it showed 3 DEVICES BASE SYSTEM with the question mark next to IT... could someone enlighten me on what it is and how or where to get the driver appropriate to remove... the system works always well with her he... he really boring does knowing that he always there...

  Thanks for the help

  Looks like lack of card reader drivers. Locate to consumersupport.lenovo.com

  It would be extremely useful to also post Device_ID sections of the device properties in Device Manager.

• features of Windows 7, no drivers for other devices

  I have a HP Pavilion 4dv-1444dx with Windows Home Premium 64 bit.  I'm missing the drivers for the "other devices" and "HP Mobile Broadband un2400 Module." They are in the same category.  Can anyone help? Thank you very much.

  Other devices

  Base system device

  Base system device

  Base system device

  Module of high speed Mobile HP un2400

  They have all the exclamation points in front of them.

  Djengel

  You need to go to each Device Manager and right click > properties > details > use the pull down to find the hardware ID and Google them.  You can take the results for HP to find the correct drivers

  

• Qosmio F55-Q504 drivers for Windows XP

  Hello everyone,

  Help, please. I have three questions:
  1 may be someone has already encountered problems with the drivers for XP for F55. I bought F55 with Vista, installed XP but I found the drivers for the WiFi and nVidia only and I was not able to find drivers for other devices unfortunately. On the site official of thare are drivers for Vista only, and there is not the version of BIOS for XP too. Maybe someone knows where I can find them.

  2. in collaboration with the laptop, there is no any CD and recovery or reinstalling Vista is possible since the only HARD drive recovery partition. For example if I'm afraid of breaking the recovery partition of my experiences with the XP installation or reinstallation of Vista and I want to do the whole HARD disk copy or to make a copy of a partition. Is this possible? Nobody has tried to do that? I tried to copy entire HARD drive with Vista or separate partiotions (recovery partitions) including - new HARD drive or partition is not loaded. I tried several times - there is no positive result. Is there a software to copy on Toshiba HDD protection? And how the HARD drive to copy to avoid lost data?

  3 F55 has GPS and preloaded Garmin Mobile PCA? ¢ - per-round cross-country? ¢ trial version. During loading, the Garmin Mobile application to enter the key. Where can I find the key for the trial version? There is no any CD, sticker or box with the key. And who knows it send a mail from Toshiba? On the official website, there are some phones only, but I can't call them I need e-mail.

  Thank you very much in advance.

  1.
  I have a Qosmio F50-108 and I lowered the from VISTA to XP. Given that our computers cell phones are essentially the same, I'll tell you what I used.

  Video: I use custom of the Dox 180.70 drivers downloaded from www.laptopvideo2go.com (http://www.laptopvideo2go.com/forum/index.php?showtopic=21982). I think that these drivers are OK (the temperature is normal as some other versions have been causing an increase in temp 5-7 degree Celsius).

  Bluetooth (I don't know if your knees there) is from-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Chipset: Intel Matrix Manager-> http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProductID=2101&DwnldID=1705 9 & strOSs = 44 & OSFullName = Windows * % 20XP % 20Professiona l & lang = fra

  Wireless Intel 5100-> http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldId=16979&lang=eng

  Its Realtek ALC 272-> R2.09 v-> http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Network LAN Realtek 8169-> http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5 & Conn = 4 & DownTypeID = 3 & GetDown = false

  AS for MODEM AND CARDBUS CONTROLLER (JMB 38 x)... I did not find the drivers for XP but... I downloaded the VISTA32 versions (in both cases I did the same thing) and I took only the driver. In the case of cardbus controlled the main file (unzip after) I took only the DRIVER file / X 32 and from the Device Manager, I forced an update of the driver of this folder and it worked :)
  Pretty much the same for the modem.
  For cardbus controlled, I used this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU vista32 driver searches for driver Cardbus
  I used this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU vista32 driver for the modem, search for modem and use the first choice: version SM2177ALD04

  One device is unknown, I think it's the NVIDIA HDMI audio driver in VISTA. Unfortunately I couldn't solve it. And I also miss the program that makes the touch buttons work. Seems that there is no equivalent for XP. In regards to the Config Free program tries to use an XP version of the program that is made for A Satellite notebook PC series. For me it worked.

  Post edited by: barbacot

• Qosmio G10-133: where to find NVIDIA GeForce FX Go6600 Vista drivers

  I have a Qosmio G10-133 with the motherboard upgrade which I believe has the Nvidia GeForce FX graphics chip Go6600, not the old motherboard which had the chip 5900.
  I'm trying to find a recommended driver for this chip when using Vista as an operating system.
  I know that Toshiba is no longer supported this discontued model and certainly do not have the drivers on their website.

  Anyone got any ideas where I can get a suitable driver, or even if there is a.
  Site Web de NVIDIA simply States that the computer manufacturers portable invidiual adapt drivers for their chips and do not provide a driver.

  Any ideas?

  My understanding of the Toshiba doesn't support Vista drivers for the Qosmio G10 The Vista seems to be supported since the Qosmio G30 series

  I read several threads on the compatible graphics driver for Vista OS and Web site _ www.laptopvideo2go.com _ provides some nVidia drivers.

  But note; These drivers are not tested and so you can install and use at your own risk

  Best regards

• I can't find the drivers for the device of 'other '.

  I can't find the drivers for the device of 'other '.

  There are 3 basic system features that are all to even show a yellow '! ' in Device Manager.

  1.

  Location: Bus PCI 21, device 0, function 4

  PCI VEN_1180 & DEV_0592 & SUBSYS_20CA17AA & REV_11\4 & 3B3A03B5 & 0 & 04F0

  2.

  Location: Bus PCI 21, device 0, function 3

  PCI VEN_1180 & DEV_0843 & SUBSYS_20C917AA & REV_11\4 & 3B3A03B5 & 0 & 03F0

  3.

  Location: Bus PCI 21, device 0, function 5

  PCI VEN_1180 & DEV_0852 & SUBSYS_20CB17AA & REV_11\4 & 3B3A03B5 & 0 & 05F0

  Please help me to fig on which driver should I install to solve this problem.

  Sincerity,

  Thank you very much

  T61p: 6459CTO T9300, NVidia Quadro FX570M - 256 MB op GL, 15.4 "WSXGA + TFT, 160 GB 7200 RPM HDD, 2 GB of RAM, Windows XP Pro

  Thank you very much

  Finally, I have foound they're driver for Ricoh 4-in-1 card reader

  First time I think it wasn't this card because I bought the card reader chip, so I don't think on this driver for the card.

  in any case thank you

• Qosmio G10-133 - do you need part no keyboard

  I have a Qosmio G10-133 for about 5 months, but unfortunately a small image fell and damaged the keyboard. He broke up a key, fortunately, and whoever is not much used. The | ------key. But it's always a pain. I could ask on my household insurance, but I won t.

  I'm trying to find the correct part number. Is it easy to install a replacement? Recently, I changed a hard drive for a friend in another laptop, and remove keyboard replacing seemed very easy. What is - this as on the Tosh?

  [Edited by: admin October 9 05 13:36]

  Hello

  I think you should contact Toshiba service partner. They can give you good keyboard and maybe you can get a used one for less money.

  Good bye

• Qosmio F50 - 10G drivers for Windows xp?

  Hello everyone I had a few problems with windows vista and games, I get a lot of delays when playing warcraft III

  in any case, I want to ask you for the Qosmio F50 - 10G drivers for XP

  Can I get them?

  Thanks for reading

  Hello

  It seems that Win XP drivers are not available at this time on the European driver Toshiba page.
  I also not very well if the XP driver will be released in the future of m.

  So do many laptops Toshiba are equipped with the same features.
  That's why drivers from other series of laptop XP can run on the F50 series.

  Try to install some XP drivers one of the series of portable which is equipped with the same features.
  Unfortunately, but that's all I can say for now.

• HP pavilion 15-p003tx: drivers for unknown devices

  I had installed a new OS (windows 8.1 64) lately and I don't seem to find the drivers for the devices listed in the Device Manager window

  Other devices-> SM Bus controller

  ID of material-PCI VEN_8086 & DEV_9C22 & SUBSYS_2281103C & REV_04
  PCI\VEN_8086 & DEV_9C22 & SUBSYS_2281103C
  PCI\VEN_8086 & DEV_9C22 & CC_0C0500
  PCI\VEN_8086 & DEV_9C22 & CC_0C05

  -> Unknown device

  ID of material-ACPI\VEN_HPQ & DEV_6007
  ACPI\HPQ6007
  * HPQ6007

  is it possible I could get these drivers?

  Thank you

  Hello

  First of all, download and install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  When the installation is complete, restart the laptop.

  When windows has reloaded, download and install HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• HP windows 7 upgraded M7-1015dx 8 windows now missing 1 drivers in other devices.

  I recently bought a HP m7-1015dx with windows 7 and high leveled for windows 8. After that cleaning installed, I got notification that wanted me two drivers in other devices in Device Manager. The first pilot, I was able to patch from a link on a blog with this specific missing driver. The second pilot missing under other devices is 'PCI Driver' on 2 Bus PCI. Under properties for this device, it reads "device PCI\VEN_10EC & DEV_5229 & SUBSYS_522910EC & REV_01\4 & 37c85ff0 & 0 & 00E1 was configured. I tried to update this specific device for a driver, but no luck any ideas?

  The Realtek Card Reader Driver for Windows 8 fixed, thank you.

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

  Hello

  I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

  I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

  When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

  Why would access denied?

  Any help would be great.

  I am running Windows 7 Home Premium

  See you soon

  Robert

  Hi Robert,.

  You receive this error during the installation of other USB devices?

  Usually this kind of error messages happen when we are not connected as an administrator.

  You can read the following article and check if that helps.

  Code 28: The drivers for this device are not installed

  Please return to the State of the question.

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?