Qosmio G10 does not start

Similar Questions

• Qosmio G10 does not work - some graphic problems

  Hello
  I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
  Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

  1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
  3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

  Pulling my hair out please help!

  Hello

  > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

  > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
  Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

  > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

  So in my opinion, you should contact the ASP in your country for a control of the laptop.
  Maybe the technicians could find the fault.

  Good luck

• Qosmio G20 does not start

  Hello

  Something is happening with my Qosmio G20.
  Sometimes when I connect the plug to the computer the DC IN indicator flashes orange and the pc does not start.
  A few hours later I try again and now DC IN indicator shows blue and I can boot my pc and I normally work for hours.
  It's very strange. It happens regularly. A few days shows blue and works very well and some other orange flashes of days and I can't work and I have to keep trying to connect and disconnect until it flashes blue to put on.

  Wouldn't be DC Power Charger malfunction? I've already ordered another of DC power charger to confirm, but my intuition says that is not the problem of the charger.
  I remember the 1st time that never happen... I was charging my iPod through my Qosmio and out of the House and let it load it. When I arrived home, the laptop power light flashes orange and I thought it was in hibernation mode. But after that time it started to happen.
  Before trying the new charger and reflections before sending it to the dealer?

  Thank you

  > Sometimes when I connect the plug to the computer the DC IN indicator flashes orange and the pc does not start.
  A few hours later I try again and now DC IN indicator shows blue and I can boot my pc and I normally work for hours.
  It's very strange. It happens regularly. A few days shows blue and works very well and some other orange flashes of days and I can't work and I have to keep trying to connect and disconnect until it flashes blue for setting on

  This flashing provides an error code which means that an error has been detected on the motherboard.
  It is difficult to say what could be possibly wrong power supply to electronic malfunction
  But this is only my personal opinion

  You should certainly contact someone who could verify the material and can run diagnostics tests

• Qosmio F10 does not start system missing or damaged

  I have a Qosmio F10, and I use all the proper procedures for RECOVERY DVD-ROM PROUDCT.

  "I did all the necessary readers updates as well, but when I turn on the laptop came with an error message:" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  "Windows was not start because the following file is missing or damaged:

  So, now my computer with startup options start, but what that you choose the system starts again and again...

  What to do? Please, I beg you.

  Hmmm usually after using the CD recovery Toshiba, everything should work ok.
  I read on some computer expert sites that this problem could be linked to the hardware failure. The HARD drive or the module memory is possibly corrupt.

  I would first recommend formatting the entire HARD drive (remove also all partitions).
  Install the operating system again.
  If it does not solve this problem you could check if it is possible to install from the original CD of Microsoft XP.
  Further, you can see the memory modules. Try to remove one and use only one or replace it with a new one.

  But please note that these are just my suggestions and I m not 100% sure if these proposals will allow you to solve problems. In any case it s worth a try

• Re: Computer laptop Qosmio F15 does not start when the Start button / stop is pressed

  My Toshiba Qosmio f15-av201 does not turn when you push the power button, even if the lights of ac adapter & battery are both on (on). Indeed, the yellow light that is supposed to turn on the power button when the laptop is turned off does not appear. In addition, there is no sign that shows the laptop tries to start when the button is pressed, not even a peep. The laptop was recently dismantled (open) to clean the fans, who made the famous monstrous noise which toshiba qosmios are apparently well known for.
  Everything seems to be connected correctly in its correct place. Nothing seems to be damaged. So, I have no idea where I can get out of here. Pending issue.

  Help will be less appreciated.
  Thank you

  The same question again?

  Why you can't finish under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=126963? To start the new thread new will help a lot.

• Qosmio G - does not start, error partmgr.sys

  I don't know what model is my computer, but all I know is when I boot it says

  File: \windows\system32\drivers\partmgr.sys
  Status: 0xc0000221
  information windows failed to load because a critical system drive is missing or damaged

  I can't find my disk of Vista and I really don't want to lose my files

  Safe mode does not work

  Hi glrunba,

  Why you n t know your laptop model? On the underside of it, you can find a sticker with the exact model number, serial number, etc..
  Check this box!

  In any case, if the SafeMode doesn't work, you need to reinstall Windows I think. Therefore, you can use a Microsoft disc or you order a new Toshiba recovery disc.

  And what of your files? You don t have backup? ;)

• Qosmio F10 does not start

  Hello

  my partner has a laptop qosmio who appears to be dead. He used it apparently pink lines appears across the screen, and it was cut. He tested food that looks very good. He gets the lights coming but they do nothing and the computer shows nothing.

  It is said there is a /bios of motherboard failure and will cost £600.00 to fix. This sounds like the MB/Bios, or would be - this something less dramatic and less expensive?

  Thank you

  From your description, I assume that there is problem with graphics card. Unfortunately, graphics card is part of the motherboard and the entire motherboard must be replaced.

  By the way: what model of laptop Qosmio has your partner?

• Qosmio F10 - Media library does not start

  Hello

  I have a Qosmio F10. My media library does not start.
  I get the message the application did not work properly. OK to close the application

  Someone please advice me what to do.
  Thanks in advance.

  I agree with Akuma. At the end you must install new OS. As already wrote Akuma, back up all your important data and use recovery for any new OS install media.

  It is a radical method, but most effective. ;)

• Qosmio F750-03W - face recognition does not start and the video freezes

  I apologize for my English.

  NVIDIA 3D test shots of program wheel. Face recognition does not start.
  If the activator of the image that 3D is disturbed and I do not see the image in 3D.

  If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
  3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?

  If the Activator active 3D image quality is mediocre.
  I have defined normal and advanced, but videos have gost especially on side effects.

  Hello

  It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
  http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001

  First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
  Also update the
  nVidia Display Driver version 8.17.12.9039
  Super-D IC Driver version 1.0.1613.809
  Toshiba Blu - ray Disc Player version 1.0.1.299
  as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633

  If stereo 3D effects are not well use X-tune to calibrate it.
  It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.

  To use the X-Tune utility, follow the steps below:
  1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
  2 sitting about 60 cm from your computer, click Start to continue.
  3. follow the onscreen instructions on each step.
  4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
  5. click on Finish to close the X-Tune utility.

  You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
  Restart and start X-Tune to calibrate the 3D effects.

  In the doc of Toshiba (link above), you can find this notice:

  1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.

  2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.

  3. depending on the game, it display correctly with stereoscopic 3D mode

  4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
  or run TOSHIBA Web Camera application.

  5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
  of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button

  7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.

  9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.

  10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.

  I hope this helps.

• Screen saver does not start on my Qosmio F20

  My Qosmio F20 screen saver does not start even after reaching the specified minutes 'wait '. I tried several ways to fix it, but to no avail. I really want the screen saver to appear.

  Hello

  Well, usually the common screensaver that are pre-installed on the operating system to work properly. I put t know what screensaver you use, but I guess that you have installed a 3rd party screensaver. In this case you should check these settings. For the most part a screensaver 3rd party has a parameters.

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• Qosmio G20-108 - does not start

  Just buying the G20 - 108 worked OK for about 2 months. Now, after being in charge of the day to the next, powers, gives the startup sound, the lights on the keyboard, power backlight the display but does not start. Sometimes after 3-4 minutes tune windows startup can be heard, not always.

  ADV69

  Hello

  You see the Toshiba BIOS screen after turning on the laptop?
  You can access the BIOS?

  If you see something on the screen and access the BIOS, I would recommend load default settings here.

  But, generally speaking, for the moment, it is difficult to say why this happens, so you should test step by step.

• After the new HARD drive does not start installation Qosmio G15

  I just got this G15 last week and one of the hard drives was bad. Put it in a new Bay 2 and it does not start. I took it back and it starts fine. I even changed the main hard drive Bay 2 HD and it starts up fine with a hard drive. It's something to do with the scores, I think. Any help appreciated.

  Hello
  I think that the boot order has been the bad HARD drive in the BIOS.
  At the new disk you do not installed any OS, and in my opinion, this is a reason for starting problems.
  Simply access the BIOS and change the boot order

• Qosmio F10 does not accept my recovery cd

  My Qosmio F10 does not accept my restore cd. It will not work in windows or dos mode. In windows, I get the error message. This recovery and applications cd is not configured to work with this machine (laptop). This cd is for: Qosmio G10, Qosmio F10.
  Please use the correct recovery and Applications cd.
  I want to format this model and would really like to use the adequate recovery cd to reinstall all applications that I don't have a windows xp disc. Recovery, one is the only one I have.

  Hello Pam

  Insert the recovery media in the drive and turn off the laptop. Wait a second and turn it on. Press the C button and keep it down. On this track, the unit will start playback DVD recovery and if you use original recovery the recovery procedure will be implemented.

  You cannot reinstall the unit if the operating system is running.
  Good bye

• Qosmio Player does not not on Qosmio G30

  Hello

  I got my laptop to out of area using the Toshiba recovery cd and now the qosmio player does not work. I can not play music without having to start Windows.
  I looked in the drive of all programs-utilities Toshiba - qosmio and he says that file not found.

  Help, please

  Hello

  There is a CD that comes with your laptop called:

  For the Qosmio player recovery CD

  you have to start the laptop from this CD, in the same way that you used in the installation of the windows recovery

  and follow the instructions

  concerning
  _________________________

  Please don't forget to take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/help.jspa?helpType=reward