Qosmio G20-102 TV TUNER: how to get this to work - what cables are required?
Hey everybody,
I just installed vista on my laptop QOSMIO G20-102 (PQG20), I have media library now.
My laptop came not like MEDIA CENTER EDITION, it came under the home edition of Windows XP (laptop purchased in July 2005).
I got 3 cables which I have no idea how to use...
laptop was purchased in Dubai/Emirates and I live in Malta
These are the cables >
http://img399.imageshack.us/img399/7189/dsc00780gi6.jpg
Now for my question (s):
1 which of these cables do I need? Im just trying to figure out how to get my satellite tv or digital cable to work on my laptop.
2 antenna adapter (see picture) is not for coaxial cable, what can I do?
3 I did WINDVR more due to the upgrade of vista, Media Center Gets the job done but I don't know what to do... This guide has confused me even more > http://www.microsoft.com/windowsxp/mediacenter/using/setup/settop.mspx
I don't have IR control cable, I do not have a remote sensor (but I have some sort of built in the remote sensor on the front of my laptop.
I'm looking for advice as for example buy this, get rid of it, install this etc...
Please, anything that can help is appreciated!
If you need information more just ask, I am here ;)
Yours sincerely
Ishmael
Hi ismael,.
I'll try to help with that, but it's a long way to the road...
I don't know what Tv system is used to Malta (Pal)?
The best way to set up your TV's with Media Center 2005 edition.
Cables:
Check the back of your cable TV installation box and find the composite or SVHS output. If you have only the composite, you can use the composite cable of the posted image. If your TV decoder has the SVHS, so you should use, to the better image than composite. You must obtain a SVHS cable for this.
Look for the audio output rca, too. Mix with the composite cable for the audio Qosmio.
But you must have:
1 control cable IR, for media center 2005 configuration as well as your TV decoder. It is cable connected to the remote sensor (see fact sheet on the back).
2 sensor for your remote control and configure it with the remote control of your TV decoder. In this way, you can control the receiver cable channels, using the remote control for your Qosmio G20 media center edition.
Recovery: you can change the channels on your TV decoder using the qosmio remote control.
3. remote control for you media Center 2005, one that came with your Qosmio g20.
Open the TV on Media Center 2005 configuration and follow all the steps required for installation.
You must follow the guide, as is explained in the image you posted:
http://www.Microsoft.com/windowsxp/mediacenter/using/Setup/SetTop.mspx
If you have all these cables, you can use the Qosmio player to watch TV. It is not tied to windows OS.
Here, simply connect the coaxial cable and let the Qosmio player search for available channels in your area. Qosmio player has the opportunity to set the colour TV system in any part of the world. all NTSC regions in all PAL regions.
If you have the remote control for your Qosmio, TV keys will work directly with the Qosmio remote sensor on board, without needing the external sensor of Microsoft.
I hope this helps you
Francisco
Tags: Toshiba
Similar Questions
-
How to get this capacity planner &; what is its requirements?
Hi friends,
I'm looking for this product in the world, but its not available anywhere? How can we get this software? Is there a trial version? What is its needs, someone can explain to me please?
Thank you!
AFAIK Capacity Planner is only available for VMware partners, and the people using it are asked to take training online as well as a brief review.
André
-
I had relocated to CC2015 Adobe applications. I looked forward to the option publish online (preview), but it is not available. How can I get that option? I tried to do an update, but nothing happens. Work on a MacBook Pro.
Hi Rochelle,
You are signed in InDesign, please logout and log in again in the Help menu and restart InDesign.
Concerning
-Anshul
-
Qosmio-G20-102 stops at windows xp startup
Hello
I have a Toshiba Qosmio G20 102 is to put an end to the machine at the start of windows xp and after a few seconds the fan voice raised high and I turns off the machine several times before she continues start.
I removed the devices all with no luck. He kept stop sometimes and some other work.
Any idea on how to solve the problem?
Concerning
Hello
Please see Toshiba site for new display drivers.
By hand, you should always use the Toshiba drivers because they are designed for this unit. nVidia drivers are created for desktop PC and not for laptops.Good bye
-
Can someone post or send me by e-mail ([email protected]) a test result of Everest (AFNOR.fr) on a Qosmio G20 - 102 (120)? I am curious about the performance of the memory. Thank you
Hi Andrei
I don't know if you find a user with a test result of Everest, but you can download a free version of this program and do a test by yourself of m.
The free download, you will find on this page:http://www.soft-ware.NET/system/Steuerung/benchmark/index.asp?Licht=Everest+download
Good bye
-
Qosmio G20 102: problem RAID the installation of windows xp media center
First of all I did not the raid driver for my qosmio. I tried the RAID of Qosmio G20, another pilot but when it reached the stage when I ask windows to format the C driver it shows me an error. It is said that there is an error in the KR10N file and it stops there.
Please help me and thank you.Hello
It seems that the Qosmio G20 102 belongs to the series of PQG20E.
Research on the European driver Toshiba page I found the RAID for Windows XP MCE driver v1.03.0008 (can also be used with XP Pro).You will need an external USB FDD to include this driver in the operating system.
But note; After installing the RAID driver you shouldn't t format the HARD disk or create a new partition, because that will remove the RAID driver from the HARD disk and installing the OS fails!I hope I could help you would also appreciate a feedback ;)
Best regards -
I no longer get suggested words when composing a message text on my iphone 5. How to get back to get this function works
Make sure that the text is on. You can do this on the keyboard (if you have several) by pressing and holding down the button to change between them.
Alternatively you can go to settings > general > keyboard and make sure predictive is turned on (the switch must be green).
If you see the image below, press the small white bar above the buttons T and Y and slide upward slightly.
-
Satellite P100-434 - Windows Vista - how to get Aero to work
Hi does anyone know how to get Aero to work on my Tosh laptop. the OS is Vista Home Premium and I have exhausted the help options OS affecting theme Win Vista, color scheme to Aero etc.
Hello
The laptop should be certainly be able to use the AERO.
It supports a 256 MB card and 2 GB memory graphics.So it seems you only need to activate the Aero on your Vista.
But which version of Vista is installed on the laptop.
As I know the basic home edition version does not include the Aero. The Aero is available on the Home Premium edition or newerSo now you ask what you can do? I found these tips on the site of Ms.
Check if the desktop theme has been set to Windows Vista1. open theme settings by clicking the Start button, clicking Control Panel, appearance and personalization, customization and then clicking theme.
2. in the theme list, click Windows Vista, and then click OK.Try to enable transparency widowed intercadres.
But note; to enable transparency, the color scheme must first be set to Windows Aero.
1. open Personalization by clicking the Start button, clicking Control Panel configuration, on appearance and personalization, and then click customization.
2. click on the appearance and color of the window.
3. Select the transparency check box. -
Hi there is a balance of $20 showing on my Itunes account, however I don't seem to be able to use it to download a movie to rent.
Can someone tell me please how to get this balance...
What happens when you try to rent the movie? If you use a family sharing and that you are the family Organizer so you won't be able to use your balance.
-
CODE - 641 Windows update has encountered an error of unkonwn. How to get this right
CODE - 641 Windows update has encountered an error of unkonwn. How to get this right
Try to run the tool:
-
I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI?
Original title: driver ethernet
I NEED ASSISTANCE WITH MY ETHERNET DRIVER. HOW CAN I GET THIS TO WORK NEW TI
Download and install it
The driver should be available in the manufacture of computers site
Use the snid on a label on the computer to search with while you're there
Or if the motherboard came with a disc to load and the reader will be on it.
-
How to get joystixpro to work in windows 7
How to get joystixpro to work in windows 7
Original title: Joystix Pro
Hi Alan,
(1) what happens when he tries to use Joystix Pro on his computer?
(2) what is the full error message?
According to joystixpro support, Windows 7 supports the use of Joystix Pro.
I suggest you refer to the procedure described in the FAQ mentioned in the link Joystix Pro
https://www.joystixpro.com/what-is-joystix/FAQs/
If this does not help, I suggest you to contact the Joystix Pro support:
http://www.joystixpro.com/Forum/Forum.php
https://www.joystixpro.com/support/
Check the link for more information;
https://www.joystixpro.com/what-is-joystix/what-do-i-need/
If you need help with Windows, please do not hesitate to post. We will be happy to help you.
-
I reinstalled adobe CS6. my other macs, I had a printer named 'Adobe PDF', that I could choose that as my printer and a dialogue box came up, I named the file and the location. I can't figure out how to get this done on my new mac. Help
There are two ways to create a PDF on a Mac:
(1) you can use the default method, which is to choose file > print. Click on the PDF menu below on the left, then click on save as PDF. This lets you name and save the PDF file using the mechanism of OS X to create PDF files.
(2) in the same menu, you can save in Adobe PDF format. It runs a script (a little slow) that lets choose you what PDF settings file you want to use. This is the Adobe-developed mechanism that replaces the old Virtual PDF printer.
-
WTH... it became a frustration of long hours, how can I get this download work?
Hi gustolis,
You are on a managed network. If not then please download desktop CC: https://creative.adobe.com/#products/creative-cloud . Sign in using your Adobe Id and password, and try to download Acrobat in the list of applications.
If stil the same question try please download from direct link: http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html .
Please follow the very important instructions before downloading.
Please let us know if it worked.
Kind regards
Romit Sinha
-
I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.
Try a reset...
Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.
If this does not help, tap settings > general > reset > reset all settings
Maybe you are looking for
-
What MacBook Pro is better for my situation?
Hello, guys. Could you please help me decide which MacBook Pro is the best for my situation? Currently, I chose between these models: MacBook Pro 15 "2.2 GHz / RAM 16 / 256 GB of storage / Iris Pro MacBook Pro 15 "(2.8) of 2.5 GHz / RAM 16 / 256 GB o
-
Word 2010 to do as my default!
I have Office 2010. Somehow, over the weekend Wordpad became mydefault program, instead of Word. I tried many things but could not find a way to make Word my default document program. I'm sure it's easy, but...
-
HP NOTEBOOK PC 630: BIOS password
My nephew has laptop HP 630 and there an administrator password that we don't know. The error code is 74842734. Can someone help us to solve this problem? Thanks in advance!
-
puedo haser para mi modem connects en wireles x than esta solo en broadband
-
Oracle Apex - Order by shuttle
Hi allIs it possible to order by the right of the list in the shuttle?Example:left values such as:------------------ABCDand user move right as values:----------------DBANow, I want to order by right and left side. Expected right at my output should b