Qosmio G20-127: failure to screen after closing the lid on Vista

Similar Questions

• Satellite L10-232: black screen after closing the lid.

  Hello

  I moved my laptop (satellite L10-232) in another room, it wasn't stop (just closed it). When I opened it there was nothing on the screen and the battery is not empty (processor still does some things). Anyone know how I can fix this problem?

  Thank you

  Easy...
  PowerManagement is weaker and less stable features on any laptop. (especially with the defective batteries).
  NEVER try to count on the home screen etc. It will work time 999 and 1000 it don't.
  Now, you're done with a laptop computer hanging.
  The ways:
  1. the easy way:
  -push the power button and keep your finger on it for 10 seconds. (5 is enough, 10 to be sure)
  -remove the battery
  -plugin powercable
  -push the powerbutton

  2. the less gentle way:
  -remove the power cable
  -Remove the battery
  -wait 24 hours
  -Insert the power cable
  -push the power button

  3. the hard way: make sure THAT YOUR HARD DISK IS NOT PASSWORD PROTECTED, to OTHER YOU LOOSE YOUR DATA.
  trying to understand hat is the startup key sequence to reset the BIOS at startup. (it should be described in your manual somewhere)

  4. the hardest way:! ONLY BY A PROFESSIONAL!
  IF MAKE SURE THAT YOUR DISK IS NOT PROTECTED BY WORD, OTHERWISE YOU LOSE YOUR DATA.
  The laptop must be open and all batteries must be removed. All the capacitors must be emptied (leaving a laptop without the battery for 72 h). Then turn on
  the laptop.

  Please note that I can't be held responsible for any damage or loss of data under any circumstances.

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Restart the problem after closing the lid of the laptop for a few minutes

  I use Windows 7 Home Premium on my Asus A53S. I have reboot issues a few minutes after closing the computer laptop lid eventhough I put what to do after closing the lid to "do nothing" for both on battery and the plug. And it will keep restarting over and over again. Rest

  Hi DennisHii,

  You did changes to the computer before the show?

  Method 1
  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Satellite L500 - external screen display after closing the lid?

  Hello
  I use the Satellite L500 - 120 Notebook, and before installing Windows 7, the laptop has a function very uncomfortable, when I applied an external display.
  When I closed the lid of my laptop, Office was shown on my display (with the native resolution of the external display) external, so I had not to
  change anything on the control panel. In Windows 7, Miss me this feature. I already tried to use the Control Panel, but there is no parameters, which fits
  with the previous ones. I can duplicate the screen in order to see my desktop screen on my external screen, but with the resolution of 1366 x 768 laptop.
  If I extend the views, then there is only the background image to the external screen, but this time with the native resolution.

  So my question is, how to conifgure Windows to recognize that I closed the lid, and the screen should be shown on my external screen?
  Or should I install applications Toshiba, that I had before, who visited account this function?

  Thanks for any help!

  Hello

  I m not a Windows 7 user because I want to wait until it will be released official, but I hope that I can help you a bit:

  First of all in power management, you can choose the action that happens if you close the lid (g. e. sleep, close, etc.). This action must be disabled because otherwise the laptop shuts down or something else.

  So I think that you need to install the display driver for your laptop. You can try the Vista driver because most of them are working on Windows 7.
  Then you should be able to define the correct screen resolution for external monitor.

  A working display driver is important to the clone or extends monitors to verify this!

• Tecra 9100: Sleep Mode is no longer enabled after closing the lid

  Hello

  First post here and not the smartest when it comes to computer skills...

  Have a Tecra 9100 about 4 years old, under XP Pro SP2.

  last 3 days whenever I close the lid of the laptop it won't STAND BY mode me leaving no option but to propel to the top and I get "SUMMARY FAILURE PRESS ANY KEY."... »

  I changed any settings whatsover and since then, I tried to access the Power Saver icon in Control Panel, but when I click on it nothing happens. I then click on a few of the Control Panel Power Options and I get the message "...". "a Microsoft power options and use the Toshiba power Saver saver" which obviously I can't access either!

  Is there any reason why closing the lid of my laptop is no longer 'Stand by' mode, basically going in OFF format only, it became a major drawback and don't know where to turn to.

  Any help or advice would be greatly appreciated.
  Thanks in advance.

  Hello

  Reading your post I guess windows on own power options and doesn t use Toshiba power saver power profiles.

  Generally, the issue should be resolved by switch again to the Toshiba power saver in the-> power options control panel! But your announcement about turning the power on, it is not possible! It s very strange?  :|

  In this case, I recommend to remove the Toshiba installation energy saver. This can be done in the Add & Remove programs.

  So finally, check out the following steps:
  Remove the energy saver, restart the laptop, reinstall the Toshiba Common modules, reboot the laptop and install again the energy saver.

  After this procedure, the splash screen should work! By the way; the hibernation mode is disabled by default. If you want to use the Hibernate mode, you will need to enable it first!

• Equium A60-692 restarts after closing the lid

  More annoying, the only thing I can do is hold the power button to turn off & on again. Is there a key combination should I put pressure to bring its edge form after you have closed the lid, or is it a fault?

  Thank you

  Usually when the size of the memory changes, the system can recover.

  Remove the battery and the AC adapter / CC, and then remove one of the memory Modules and power on.

• Windows error recovery received CONSTANTLY after closing the lid

  I did a factory reset using the recovery a month ago discs.  When I was using the system at this time as I closed the lid.  When I came back to it at a later date, I opened the lid and noticed that it was not on.  I pressed the power button and received the following message is displayed:

  Windows error recovery

  Windows is not shut down successfully.  If it was because of the system does not, or if the system was stopped down to protect data, you might be ale to recover by choosing one of the Safe Mode configurations from the menu below:

  (Use the arrows to select your choice.)

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Start Windows normally

  What is the problem and how can I fix this so it doesn't happen or is this normal with Vista.

  Hi SouthernDixieCowgirl,

  This would happen if the driver graphics card on the computer is damaged or needs to be updated.

  You will need to update the drivers to display on the computer card by visiting the manufacturer of the card or the computer manufacturer's website and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Also, make sure that you install drivers chipset update by contacting the manufacturer of the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen after opening the lid - Pavilion g6

  Hello, I need help. I bought my laptop a few days ago and installed Windows 8.1.  When I closed my lid and opened after a while the screen remained black, so I had to force close button and restart. I tried to change the power plan settings to "Choose the closure of the hood", and it always ends the same way "Black screen", does nothing. This is a brand new laptop and it is that wories me. It must be a software problem, I hope that you guys could understand.

  Thank you Marko

  Finally, I found a solution.

  I did Update my Windows and everything works fine from that point.

• Qosmio G20-127: keys Fn & shortcut keys do not work with Vista RC1

  This problem is really annoying me. Shortcut keys (play, pause, forward, record, brightness), or Fn keys work since I installed windows vista RC1.
  I need to find a solution to this problem. If someone did experience please provide me with your comments.

  Also the ConfigFree seems to be incompatible with Windows Vista, if someone knows a thing or two, I would be very grateful

  Hi Shaker

  There is no trick or two!
  Do you know that the Windows Vista RC1 is not a version of the official end and the RC1 version contains about 1500 bugs!

  In addition, to use the Toshiba features such as the FN buttons or shortcut keys you need drivers Toshiba. BUT you won't find not all Toshiba Windows Vista drivers at this time.

  Why? Because Windows Vista is not official on the market. So if you want to use the Vista at the moment on your laptop, you will need to use it without the Toshiba options.

  But I m sure you will get the Toshiba drivers If Windows Vista has been fully developed and official to buy.

• No battery indicator and the laptop does not shut down after closing the lid

  After returning from my lapyop return to caused by a virus factory settings I can't have my defiler of battery on my taskbar

  and also I got my lap top programmed to close on the cover but can't find where to put in place

  Hello

  I suggest you to visit the web link below to change the change the power button cover option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-what-happens-when-you-close-your-mobile-PC-lid

  Once you have visited the link above, try the method to display the power plan options and then search forcover and the power button and choose your preferred option.

  Hope the helps of information. Please post back and we do know.

• Satellite L300-1FS - Wireless reconnect after closing the lid

  Hello

  My 2 month old son Toshiba laptop works very well in many ways, but an annoying problem, is that if we close the lid when you open it again it doesn't re connect to our router. If I click on the network connection, it just says: there is no everything!

  Sometimes the switching market re wireless switch will connect there, but more often than not, it's a reboot, which is annoying.

  Proves that the wireless card works but it would be nice to not have him harass me every time it does not connect.

  All ideas welcome.

  Hello

  First a question: what exactly happens if you close the lid?
  This laptop stops, or goes to stand-by or extended sleep?

  However, in your case, I would try to update the driver WLAN and the BIOS. Check the Toshiba website for updates:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It would be interesting to know what operating system you have and if you are running the factory settings or you have installed another OS?

  A friend told Satellite L300 and he is very satisfied and can t notice any problem. :)

• Problems with colors on the screen after installing the new motherboard Vista

  Windows Vista Home Premium 32 bit wrong colors.  Monitor works fine.  If a monitor has checked and all colors were there.  Had installed a new motherboard.  Worked well for fivedays then the colors red and green disappeared again.

  * original title - want to get the correct colors on my display/ecran.*

  You don't say where the motherboard has come: the Mamufacturer of the computer, or that you buy yourself.

  Take the correct option:

  Go to the website of the manufacturer of your computer/motherboard > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Need driver audio for Vista - QOSMIO G20-127

  Hi mates,

  I have a Qosmio G20-127 (PQG21E) series. I try to install Windows Vista, but I have no driver sound for this machine. If anyone knows the solution for sound please help me and send me a mail on [email protected]

  Concerning
  AZHAR

  Hello

  I do not have a Qosmio G20, but everything you want to know about Qosmio G20 and Vista you will find under http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=75318 or other subjects where FranciscoJr posted.

  Good luck!