Qosmio G20 156 runs slow after system restore

Similar Questions

• Qosmio G20 156: clean install?

  Hello

  I am new to the arena for laptop and am the proud owner of the Qosmio G20 156 fantastic.

  I was wondering what people recommend doing the first thing when you receive... in what respect the sofware & operating system; Is it a good idea to perform a clean installation of Windows and the format of the HARD drive? I'm asking this is because some laptops come with a lot of junkware? If so, it's a very simple process using the recovery discs or I just would open the Pandora's box of possible complications?

  I'm quite proficient with installing the drivers etc.

  Any advice much appreciated!

  Hello

  Well, it s beautiful that you're proficient with installing the driver, but is not everything you need to know.
  This device uses a RAID technology and you will need to also install the RAID drivers, etc.
  I don t recommend to format anything or install the new OS. Toshiba programs and applications are installed on the new Qosmio because it s a laptop top of range with many features. The latest features need these applications.

  But of course it s your device and you decided what and how is running on your laptop.
  I have this case you can use the image of Toshiba and you can remove some programs from the laptop computer in Add and remove programs

  It is a simpler way.

• NEED DRIVERS AFTER SYSTEM RESTORE

  HP Pavilion g6-2128tx Notebook PC 
  Serial number: 5CD2231LJF

  {Information}

  After system restore a bunch of drivers was missing, I managed to update some drivers but I need some I can't find. Help!

  Hardware ID

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_05

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  I run on Windows Ultimate-64-bit

  Help would be GREAT

  Hello

  Download and install the following.

  Chipset Driver - Windows 7.

  After this Setup is complete, restart the laptop.

  Realtek software LAN.

  Broadcom Bluetooth 4.0.

  Realtek card reader driver.

  Intel Management Engine Interface.

  Intel USB 3.0 Host Controller Driver.

  Kind regards

  DP - K

• Vista running slow after update 11/05/2011 dealing with Outlook 2007

  Vista Home Prem running slow after update 11/05/2011 dealing with Outlook 2007. Now, it takes 30 to 45 seconds to open Outlook, or any program. I'm under IE 9.0.8112.16421.

  The installed updates were:

  Update of security for Microsoft Office System 2007 (KB2540162)

  Update for the filter of junk e-mail in Outlook 2007 (KB2536413)

  Update of security for Microsoft Office PowerPoint 2007 (KB2535818)

  Update for Windows Mail Junk e-mail filter [May 2011] (KB905866)

  Windows malicious software removal tool - may 2011 (KB890830)

  Update for Microsoft Office Outlook 2007 (KB2509470)

  Can anyone help?

  Thank you

  Tony

  Hi Tony,.

  You can try the following steps and check.

  Method 1:

  You can try to run the performance fix and check.

  Check out the link:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  You can also read the following article and try the suggested steps.

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  For more information, see the links:

  Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Hope this information is useful.

• Integrated digital televisions Qosmio G20 156

  My husband has a Qosmio G20 156.
  Can someone tell me if there is available on this model digital TV reception. I hope to get a USB DVB - T for father's day, but looking at the specifications, it indicates that it has integrated digital capabilities.
  I am sure however if his machine didn't and then we would have already plugged!
  Can someone clarify for me, as I would like it to be a surprise.

  Hello

  According to the website of specification Qosmio unit was delivered with Tuner TV FREEVIEW + analogue hybrid and DVB - T antenna.
  I don t know where do you live, but the fact is that you cannot receive digital signals everywhere. The signal must be strong enough to receive digital channels.

• Impossible to uninstall Symantec Endpoint Protection after system restore

  Hello
  a program has been uninstalled (Symantec Endpoint Protection)
  After have rebooted and still have problems to install a newer version, I decided to do a system
  Restore prematurely, I uninstalled the original version.
  (Since I couldn't find the installation files or my license info)

  The old version worked again.  Now I am able to start the
  new version, the old version will not uninstall.

  It just sits there in a small box with a bar saying Windows of progression
  in the configuration of Symantec Endpoint Protection and it remains as it
  for as long as I left, at least 25 minutes.

  I thought that the system restore would put things back exactly as they
  have been, but it's apparently not the case.

  OT: Impossible to uninstall after system restore

  Any ideas on that?
  The OS is Windows 7 Pro 64 bit 64-bit.
  I found this, but have not yet tried.
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  I was able to cirumvent the problem by a selective startup in Msconfig.

  I disabled all startup items, all services not MS, restarted and then uninstalled

  successfully.  However, I met another strange problem.

  After uninstalling old version, I rebooted (the system was still selective

  startp) I put a new restore point and installed the new version successfully.

  Later, realizing msconfig has been arrived at "selective", I went and

  has tried to return to Normal startup.  However, when you select normal

  and hit 'apply', it immediately jumps to selective.  I have never seen it before.

  I didn't know how to solve.

  Instead, I uninstalled the new version of the AV program, jumped to the restore point

  I did before I installed, rebooted, open Msconfig and have been correctly set up

  In normal mode.  Then reinstalled the AV.

  Everything is OK now.

  You ever heard of this problem of msconfig before?

• Cannot run some programs after system restore to remove the virus

  Hello

  Toshiba my duaghter had a nasty virus that pretends to be an antivirus software product, which sneaked in, between the time his default service Norton has expired and I had the time to install Trend.

  Can not remove it using trend, so on the advice of a friend, decided to make a windows system restore to a point before the infection. It worked successfully and the virus has disappeared, but now she can't run some programs, I tried to reinstall Trend, but fails because he says you must first uninstall Norton. But I can't run Norton, or uninstall, and certain folders on C: are no longer accessible.

  I have to do a full restore of the Toshiba System (IE back tofactory settings? This seems a drastic measure, but the issue is beyond my meager knowledge of PC.

  Thank you

  Graeme

  Hey Buddy,

  Hmm... This announcement is a bit confusing... Maybe the programs you want to say were installed after the system restore point, who knows?

  In my opinion you must reset the laptop configuration that you have already written. This will restore the pre-installed Windows version where everything is working correctly and that all the drivers and tools are installed.

  Therefore, you only need the Toshiba Recovery disk and boot from it. This will restore the factory settings.

  Check this box!

• The created performance problems running in XP system restore

  I ran the XP system restore after installing new software for my dsl modem. Now many programs do not run, my computer is continually updated and some updates fail and my computer is slower than ever. My Zune is not yet recognized. What can I do?

  Hello

  · Why do you run system restore after the installation of the DSL modem?

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · You receive an error message or error code when you use programs?

  It will restrict the issue by following the steps below:

  1. check if the error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  2. search for the installation error code that your computer has saved when the installation failed. To do this, follow these steps:

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  (c) in the status column of this window, find the failed to install update and then click on the red X.

  (d) a new window opens that displays the installation error code.

  3. you can follow the procedure of the link below to improve the performance of the question: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  You can also check: your Zune player is not detected by your computer or the Zune software: http://support.microsoft.com/kb/944909

• Satellite A500-1CO - loss of data after system restore

  Hi all, because the system was slow I decided to restore the system using the DVD of restoration system (1,2). The problem is that I have not saved anything from drive D, and after the restore, all files have been deleted. My logic was unaware that the restoration apply to drive C (system disk) and let the D drive as it is, but I was so wrong.

  Is there a way to recover all or part of the lost data?

  Please help me. Thank you.

  Hi mate

  Unfortunately, I think that there is not much to do now.
  Recovery DVD redefines the laptop to factory settings and, therefore, this disc format the whole HARD disk and also all the partitions and, therefore, you will lose all data if you n t backup this before starting this procedure.

  You should read the user manual or information before starting the recovery. :(

• M57 6072CTO no usb after system restore

  I just did a system restore by using the disks IBM XP SP2 and none of the USB ports is enabled once windows starts to boot, os I have no keyboard or mouse and no other way to access the computer.

  No idea how I can get around this (there is no PS2 Connector)

  Thank you

  Peter

  The problem is I was impaitent Walker do the restore I that the aircraft had crashed so not restarted so no usb.

  I did the restore of the system again and he left running while doing other work, and that's all OK after that

• His lost after system restore

  Recently I did a system restore, after that my computer has crashed and everything seems to be OK except for the lack of noise coming from my speakers. This isn't an uncommon problem because I found a bunch of stuff on Google, but nothing I tried worked for me and I'm frustrated. I tried to uninstall the device from Device Manager, but even if I have it and restart the computer, he manages to resettle in any case, and yet I still have no sound. Everything seems OK despite these problems. I tried to download the latest drivers and their installation without success. Update the drivers does not work either. So, I wonder if someone can help, and if you manage to get through this, I'll save a song as a tribute for you 30 seconds. Yes I know. I'm quite desperate.

  This may be of some use for you guys:

  Value of the property
  Device ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000\41AF0929E00301
  Status 0x0180200a started
  Blocking problem 0 x 00000000 (0)
  Service IntcAzAudAddService
  Blocking capabilities 0 x 00000000
  Config flags 0x00000000
  Class MEDIA
  Manufacturer Realtek
  Hardware ID HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888SUBSYS_10192111
  Compatible IDs HDAUDIO\FUNC_01VEN_10ECDEV_0888REV_1000
  HDAUDIO\FUNC_01VEN_10ECDEV_0888
  HDAUDIO\FUNC_01VEN_10EC
  HDAUDIO\FUNC_01
  Class GUID {4D36E96C-E325-11CE-BFC1-08002BE10318}
  Location internal High Definition Audio Bus
  Bus number 0x00000000
  Name of the enumerator HDAUDIO
  Description Realtek High Definition Audio
  Driver {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005
  Name of the object physics \Device\000000a2
  Number of UI 0x0000ffff
  BusType GUID {41203534-2037-3144-2042-422044362041}
  Former bus type 0x00000005
  Type of device 0x0000001d
  Installation state 0 x 00000000
  The device address 0 x 00000301

  Oem2.inf of device Configuration file
  CoInstallers32 RtkCoInstXP.dll, RtkCoInstaller
  AssociatedFilters Wdmaud, swmidi, redbook
  Pilot RtkHDAud.sys
  InfPath oem2.inf
  InfSection IntcAzAudModel
  InfSectionExt. NTx86
  ProviderName Realtek Semiconductor Corp.
  DriverDateData 00 40 18 67 CA 01 E7 D7
  DriverDate 17/11/2009
  DriverVersion 5.10.0.5983
  MatchingDeviceId hdaudio\func_01ven_10ecdev_0888
  DriverDesc Realtek High Definition Audio
  SetupPreferredAudioDevicesCount one

  Class MEDIA
  Audio, video, and game controllers
  Installer32 MmSys.Cpl, MediaClassInstaller
  MmSys.Cpl, MediaPropPageProvider EnumPropPages32
  Troubleshooting-0 hcp://help/tshoot/tssound.htm
  Icon 3004

  Thank you!

  You can try to contact support from Realtek:

  http://www.Realtek.com.tw/contact/

  Also, try to run this fixit:

  http://support.Microsoft.com/mats/AudioPlayback/

• Windos XP and Internet Explorer runs slow after turning to...

  I really hope that someone can help me that the Forums have proved useful to me in the past.  This is my last issue.

  One of my parents, for reasons that I won't, get updated his cable, phone and internet in one of these beams that offers local, rather than paying for phone company each separately.  She has an office of older model PC that runs Windows XP and worked it, Office 2003 (if the memories are good) and Internet Explorer (I mean IE8) very well and quickly.

  After its upgrade of the high-speed line was complete one of the first things I did was to go to Microsoft to download a bunch of updates as it had been on dial until it was impossible to download everything that she needed (she had not kept with it but also rarely used the computer to get on the net so it was not that big a deal).  All XP downloaded approximately 77 updates and after a while successfully installed all of them.  He then restarted and soon after started incredibly slow operation.

  Because it runs more slowly now that when she was on the dial upwards, she is ready to get rid of its highspeed which I said.  I think that one or more of 77 more updates, I installed may have done something.  Also his internet browser now looks like my laptop (Acer with Vista and IE 9) so I think that maybe his version of XP and IE do not play nice with them.  Finally something told me she had a Trojan horse, and some adware that I used Lavasoft to get rid of and their last free version is installed with moy.

  Any help would be appreciated to untangle what is causing his PC suddenly run slow.  I'm tempted to use a restore point and go back, but I'm not sure how to go (and really, I've never used a prior restore point).  I'm half tempted to simply restore the entire hard drive but would have a copy of XP (I don't have a copy of Windows 98 that I some how came in possession of CD).

  Help, please!

  E-mail address is removed from the privacy *.

  Get sound try trojan remover update it and then click scan.

  Then select all the options in the Utilities menu. Whatever it is, tell him to remove it.

  If it does not work in normal windows, start in safe mode / networking (reboot hold F8 down), then select it.

  If she needs help, I can help here with teamviewerremote.

  She's going to see what I'm doing. If she gets it, I need the ID and password it gives him. If I can connect<- again="" if="" this="" is="" slow="" in="" normal="" windows,="" boot="" into="" safe="" mode="">

• After System Restore Windows XP behaves strangely, said wininet.dll must be installed

  original title: XP startup problem

  My computer was slow, so I did system restore at an early date.  The system worked better, so I system restored recently.  Now the computer will just go up to my screensaver.  Does not start.  I can access taskmaster; but I am unable to run anything or to find beginning.  I have been informed that wininet.dll must be installed.  How can I restart or restore this computer.  I have windows XP.

  Hi ThomasCline,

  Try to boot your pc in safe mode to see if it works properly. http://support.Microsoft.com/kb/315222

  If everything works properly in safe mode, you need to configure your pc in clean boot mode. http://support.Microsoft.com/kb/310353

  If all above fails, try running the SFC, you are able to open the Task Manager, click application-> new task & Type-> sfc / scannow-> ok

  You will also need your cd of windows xp for this repair.

  I hope this helps...

• lose the connection to the net after system restore

  I used the system restore and restart the pc after it but I lose the connection to net it gives zero transmission and recived it is a lock on the connection icon and when I try to use repair it gives the error message (windows could not finish repiring the problem because it is impossible to perform the folloing action not to conduct not query tcp/io of the canoe connection parameter)

  There is no problem with the connection that the net works with other PC not mine

  When first I used the net all the me I connect the Caron and its automatic execution

  so why it dosent run now the files make me lose the file how to fix

  When you did the system restore you have lost the connection to the network.

  Create a new connection

  Dale may

• Disk space HARD disappeared after system restore

  A day ago, I decided to free up space on the C: drive of my computer. By the time my drive was 10.4 GB of space. I deleted some old games and files, releasing much of the space and defragged my system gives me a total of 29.5 GB of space.

  Shortly after, I was forced to do a restore of the system on my computer to correct an error. To recheck my space on the drive, he came to 10.4 GB. Deleted programs have not returned and after a thorough check of the system.  I tried several other forums as to find an explanation for the missing space, but most of the answers in the forums does not solve the problem at all.

  What happened to the 19GB of space freed after deleting these files and old games?

  Hello

  Since you did a system restore, fragments of programs that have been installed on the system earlier were able to return. I suggest you follow the steps mentioned below.

  Step 1:

  Run Disk Cleanup on the system. See the article mentioned below.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Step 2:

  I suggest you to do a Disk Defragmenter. See the article mentioned below.

  How to defragment your disk Volumes in Windows XP

  http://support.Microsoft.com/kb/314848

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.