Qosmio G20: Can't burn CD but only DVD - power calibration error

Similar Questions

• Equium M50 can burn CD but not DVD - power calibration error

  Hello

  Well, basically, that's my problem. The other day I tried to burn a dvd but kept getting the "power calibration error" tried different DVD and burning software, but still the same problem, although I can burn DVDs perfectly.

  Any ideas anyone?
  Thank you.

  Hi dude

  Unfortunately, this doesn't sound good.
  Power calibration error is known to me and it seems that there is no other way to replace the CD/DVD drive with the new.

  According to the error message is unable to calibrate s lens by car in the right position and that's why the drive can't handle certain mediums.

  See your owner's manual for compatible CD/DVD players.
  If you want you can also control the caught player in charge of a partner of service authorized in your country.

  Good luck

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• I have only 300 GB, I discovered that 32 of the tokk games up to 3.32 GB. Can I burn it to a DVD and use them like that?

  I have only 300 GB, like I had more but don't know how to do in this regard. I win a lot of Bigfish games, I discovered that 32 of the tokk games up to 3.32 GB. I have more than a hundred of their games I bought so I hate to remove them. Can I burn it to a DVD and use them like that?

  I may be possible. There are several factors that can stop the games run from a DVD.
  A better option for success would be to use a USB stick, but I'll be referring to DVD.
  The kind of games that you download big fish are more likely to be able to run from a DVD a lot of games. The best way to know is to burn on a DVD, but the process will be a little tricky when you burn the game to the DVD it will change the installation path (from C:\ to the drive letter of your DVD eg - E:\).
  You can try the following-
  -Copy the folder of games on DVD

  -Rename the folder the game is installed on the HARD drive. Just add a few letters before the name of the game, for example, Bejeweled to aaa Bejeweled.
  If the experiment fails, simply remove you the extra letters and plays the game.
  (a) - If you do this, you go back to the original name to uninstall the game if you want to later, and the Launcher of Big Fish (or what is called the Big Fish program) may have a problem when you rename the Games folder as well, so don't try to run the game from the Big Fish app to use a shortcut.

  -Make a new shortcut to the games .exe in the folder that you copied to the DVD. and see if the game will be launched from there.
  (a) you must always change the path on the new shortcut if it still reads
  the original location of the game is installed.
  To do this, you change the drive letter in the properties (R\Click on the shortcut)
  in the original example - C:\.  There are two places you need to do this-
  'Target' and ' start in '. If the name of the games is long, it may be easier to copy the
  'Target' in Notepad to reveal the path drive. You can change the path of the reader here and then copy and passed to the 'target' box in the properties of the shortcut.
  Do the same with "start in" if necessary.

  If you have a lot of video or music, then they would be more suitable for playing from a DVD.
  If you are running low on HARD disk space the best option is to install a second drive HARD a 500 GB HARD disk is cheap, better value for money than a USB key and easy to install.  There are many tutorials on the i-net for installation
  a HARD drive.

  .

• I bought item first Adobe 12. Why I can't burn a CD or DVD?

  I bought item first Adobe 12. Why I can't burn a CD or DVD? Do I need another program?

  This is the Photoshop forum.  You want the first forum of elements:

  First Elements

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• Qosmio G20: 1 x recording speed 16 x DVD - R Datasafe

  OK, I normally buy Verbatim and have never had a problem. At lucky on a tub cheap DATASAFE 16 x speed DVD-R and can only write speed 1 x. Manufacturer ID: CMC MAG. AM3.
  The drive is a carpet * a DVD-RAM UJ - 846 Firmware F101, serial number BD027ED1. The date of the firmware is 21/09/05 so almost a year. Of course I don't expect you to write at 16 x speed, but 8 x speed would be fantastic. Qosmio G20 material.

  Yes.
  You should know that not all readers to support all of the media and are not compatible with all CD and DVD.
  As suggested in the above display, you will find tested and compatible media information in the user manual.

• Burn successfully but the DVD is empty - Satellite A200-1 s

  Hi all

  I've read many threads @ this forum, but not just any solution has solved my problem! Can you help me please?
  I tried to burn to DVD a lot like, PRINCO, VERBATIM, TDK, TRAXDATA, etc., and the thing is that after the burning of some data files on them.
  There is no data written to disk after successful burning...
  I can write CDs without problems, but the DVD - I have no chance! I tried to also use TOSHIBA DISC CREATOR, but when I try to burn data to DVD files it give me an error (I'm sorry I can't tell the specific error, I don't have any blank DVD right now).
  I hope someone could help me

  I use Toshiba A200-1 s 5 with DVD - RW DL - TSSTcorp CDDVDW - L632H ATA drive

  Sorry for my bad English!

  Info on my DVD RW drive

  http://img67.imageshack.us/img67/8266/capturewr1.jpg

  Here, I've provided a few screenshots of the progress any BURNING of data files on a DVD - r Princo

  1. Insert the DVD-R in my DVD - RW drive
  http://img263.imageshack.us/img263/5431/37542136pt5.jpg

  2 choose to burn data files
  http://img263.imageshack.us/img263/4032/31734909fk2.jpg

  3. Add a software to burn
  http://img263.imageshack.us/img263/630/46680059bc8.jpg

  4. before burning data (no simulation, slow speed)
  http://img263.imageshack.us/img263/3615/28085284on5.jpg

  5. the progress of the print data file
  http://img263.imageshack.us/img263/5394/94212782qb0.jpg

  6. successful engraving
  http://img263.imageshack.us/img263/3702/46197086om7.jpg

  7. access to content (F: /)-my DVD - RW drive (Nothing) :(
  http://img263.imageshack.us/img263/6641/30816699rg1.jpg

  Hi mate,

  I guess that you did not check the drivers download site on updates of firmware for this drive?
  As far as I know there are updates firmware for this specific player, so go and check the section drivers on the Tosh site and maybe you're lucky. :)

  Welcome them
  Dennis

• How can I burn and watch a dvd on my windows xp. and what do I do

  I want to know how to burn DVDs, s under windows xp, and I have to be able to do

  To watch DVDs, you need to install a DVD decoder...
  or download, install, and use a media player like VLC.

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  ===

  If you want to burn video DVDs that will play in a
  DVD Player standalone you need DVD Authoring
  Software.

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Qosmio DX1210 can't burn CD

  Hello

  I have an i5 DX1210 all-in-One, which has a BD - ROM.
  My problem is, it will read CDs and DVDs and I can Brown on DVD but I can't CD Brown

  She did it for the new, it makes no difference if I use
  3rd party software or is it not still comes up with an error when burning
  CD, and tried on 4 or 5 different brands of CD and
  always the same result.
  I tried the link as suggested on another toshiba below site, but it makes no difference.

  Any advice would be appreciated.

  [http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us]

  Spida

  Hello

  Have you tried format CD R TDK?
  I had problems with writing data to CD and DVD. I tried the TDK R and they worked fine

• Qosmio F10 can't burn DVD + R

  I cannot burn DVDs. I seem to be able to burn a DVD - RW OK and I was able to burn a DVD + R gift, I had, but with the pack of Philips DVD + r, I for the moment any attempt to burn the ends in an error, the software I use for burning, for example, Media Center, WinDVD Creator, Roxio MyDVD Studio. Does anyone else have this problem. I'm doing something wrong?

  Hello

  I think that the cause of your problem are the DVD itself. DVD players are unable to handle all kinds of discs. They work with the right manufacturer discs. But Philips and other labels do not produce the disks, they buy them all. And there is no way of knowing who has really produced the records. So, you can try just serveral labels to find the good DVD. If you remember the label of the DVD + R, you burned, you should start with this one. But there is no guarantee that the disks of a label always work. The manufacturer may have changed.

  It's an unfortunate thing, I know.
  Good luck!

• How to extract non-consecutive pages of a pdf document. I can highlight in thumbnails but only extract consecutive.

  How to extract non-consecutive pages of a pdf document?

  I see its easy to do with the consecutive pages highlighting the thumbnails can "extract", but this does not allow for non-consecutive pages.

  Thank you

  After you select the pages, you can drag and drop them somewhere,

  as on the desktop, and a new file will be created with only the pages.

  Highlighting the pages if not achievable, or too complicated to do, then a

  script can be used where you specify which pages from script

  extract them to a new file.

• I can't burn my CD on Windows Media Player error "connect a burner and restart the player.

  I have a bunch of files music m4a songs bought on iTunes that are on the Windows Media Player. I insert a blank CD, and he refuses to burn the songs. I put it in my laptop, go to the option burn and it says "connect a burner and restart the player ' and doesn't read that there is a CD in there, even if there is. Even if I put all the songs I want in it, it won't work. I need help.

  No problem, at least it's a step forward that it is not only the media player.

  At this point if the CD-ROM drive does not at all, it could be a couple of things.

  1. First of all, just make sure under the folders under the view tab Options, that the "hide empty drives" is not selected. It could make your CD-ROM writer hidden just because there is no data in there at the moment.
  2. The drive appears not could also be that it is disconnected, but it's not terribly likely.
  3. Check Device Manager to see if the CD drive is listed, and if she has any warnings associated with it. You can open the Device Manager by performing a search in the search box of the start menu.  Locate the CD drive in the list, and then double-click it to view the status. He can say everything is fine, or can provide details on all issues.  Also, while you're here, you can check an updated driver. But this brings me to the next point...
  4. If the driver he is already up to date, it is interesting to watch your your model computer manufacturer Web site see if they have a newer version. Sometimes Device Manager detects outdated drivers and uses, when the manufacturer's website has something more recent.

• Can I burn on a cd/dvd burning several files (.fpbf)?  If Yes, how, because the application of each file to burn a blank cd/DVD?

  I created several burn (.fpbf) files that are sitting on my desktop.  I want to burn these file separated into one cd.  At present each file burn requires a blank cd.  Is there a way to turn it?

  Hey Bob79,

  Being able to burn a lot of files on a disk is a great feature of backup files and carry them.

  This article goes over how to burn items to a disc: OS X El Capitan: create and use a folder to burn

  The way it is configured in OS X El Capitan you can burn only 1 file to burn to a disc and not multiple.

  If you want to burn all the evidence of burning I suggest make a new folder to burn with all the elements that it.

  You should get the drive you want.

  See you soon