Qosmio G20: Cannot read discs DVD + RW brand Roco

Similar Questions

• Qosmio F10: Cannot read all DVDs recorded on JVC DVDRW

  I have a Toshiba Qosmio F10 in general I am very satisfied with the camera, but... I don't no why I can't play SOME DVD saved on my DVDRW JVC home and not in others, it's driving me crazy, no matter who else has this crazy situation, any suggestions would be most appreciated, as I add another HARD drive to this unit, 60 GB seems a bit small for a work of TV/DVD etc.

  Thank you very much, keep up the good work Toshiba ;-)

  Hello

  What you mean exactly with some DVD s? There is a specific difference between s DVD? Do you use several virgins DVD s from different producers?

  As far as I know you can built in 100 GB HARD drive.

• HP CDDVDW TS - T633P SCSI CdRom - cannot read SOME DVD

  PC is a Touchsmart 600-1000 t, Windows 7

  DVD Player cannot read some DVD.  Completed all the 8 steps in "Drive cannot read disks (Windows 7)" on the HP site.  A ran HP "Hardware Diagnostic Tools" (linear CD search Test"and it passes on some DVDs and returns"No Media"on the other.)  Very old CD "Office for WIndows 95" and a few new DVDs (HP Officejet 6500 has more) past, but more brand new DVD and DVD written on the same computer is not detected.   Those who lack of DVD also will not autorun on my PC.  These same DVD which failed on my PC is read fine on my old Windows XP laptop.

  Strongly suspect one slightly out of the drive of alignment that must be replaced.  Ideas before ordering a replacement?

  Hello

  Check the automatic run settings in the control panel. Ensure that the measures to be taken when optical media are inserted represent the media format type that you create.  You can check the box at the top to use AutoPlay for all media types, then select the action for the particular media format.  Be sure to save the changes.

  You can also consider using Imgburn to read and write to check some media to see if you actually have some hardware issues. ImgBurn will also appear to what types of media are acceptable for the optical drive.

  It is also possible that the media you use is of a lower quality.  I prefer the Verbatim. It cost more but I've never had a problem with Verbatim.

  If your PC is under warranty then contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Qosmio G20: Feedback speaker + HD DVD will not play

  I usually don't use the internal sound on the laptop it is normally plugged into my hi-fi using optics and a creative labs USB device.

  However, I am experimenting with playing a DVD hd through my TV using the hdmi output connection. The two DVDs, DVD player high definition HD Toshiba tries to play but nothing happens. Anyway back to the right question.

  I thought that, perhaps, the cause is that I had disabled internal sound, so I let him. However, when you start up Windows, I got your feedback loud and terrible (MOM had to leave the room). I had two times to turn it off by pressing on the top to move off. When feedback was going on the computer seems inadmissible. I discovered later that he would sometimes silence if I almost closed the lid. Finally, finally, I managed to get into the control panel to turn off the sound edge. Any ideas?

  Back to DVD problems. Bought the PC in early January and Doom on HD DVD just to try (has not bought a laptop for high definition DVD just the model I chose had it anyway). When I tried doom, it did not work, a few weeks ago. Permit on board and it worked. Disabled the sound, back to my stereo and it still worked. In both cases, did not watch the movie, was just to try the stuff of high definition.

  A colleague lent me King Kong on HD DVD and I had intend to also try the hdmi connection. The two videos won't play.

  Any ideas?

  Wait a moment David! Your ad is so confusing to me that I n know how to understand all your problems.

  Can we please discuss step by step?

  First I delete information because, as far as I know, the G20 is not distributed with HD - DVD player, only G30 (not all). Because of this I will ask you once again: is this your Qosmio G20 has ODD HD-DVD and HDMI output on the basque coast port? If Yes can please write you exact model description (G20 - XXX)?

  I ask this because I tested the G30 friends with my HD-ready LCD TV and everything works perfectly. Picture on TV is brilliant and its really fantastic.

  Please write again, but clear sentences and try to explain what is exactly your problem.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• Qosmio F - cannot read or write DVDs

  Hello!

  my laptop read CD bun does not read the DVD.
  what the problem?

  Hi bobyradulescu,

  What laptop Qosmio F you have exactly? Is it equipped DVD player or not there only CD player?

  If you have a DVD player, maybe it s dust on the lens of DVD. You must use a microfibre cloth to clean the lens.

  Also try to delete upper and lower filters in the registry:
  http://support.Microsoft.com/kb/314060

• Qosmio G20 cannot boot from CD copied

  Hello all you people support for this forum:

  I have a Qosmio G20 purchased at the Canada a couple of years back. I lost my recovery DVD (original copy) but I have an ISO image burned on my backup drive. I burned the image on another DVD and I tried to recover from this DVD. Unfortunately, my computer does not this DVD.

  The BIOS is set to boot from the CD first. I tried to start other systems with this DVD and it starts as a result. I also tried to boot from other CD of the OS for example XP Professional. All of these discs are not the original disks. They are made from the original ISO image.

  I wonder if the Qosmio DVD only reads the original disks or is there something wrong with my G20.
  This laptop can't boot from the USB DRIVE.
  It was one of the things that I tried. But of course, the G20 does not support this.

  Thank you for your response in advance and looking forward to hear from your support.

  Hey dude ;)

  Don't you think you'll encounter here of support persons?
  This is a user forum and you will encounter only Toshiba laptops users who are trying to help other users.
  I thought I should clarify this first ;)

  Now to you deliver
  The CD/DVD drive is able to read many CDs and DVDS. But of course, it can happen that some burned CD or DVD cannot be read.
  This also happens to me.
  I have a desktop PC and different CDs/DVDs from different manufacturers are not totally compatible
  I have tested a lot of CD and DVD, and finally I spent in a TDK.
  It seems that these media are better suited to my CD/DVD drive.

  Maybe you should try to boot from another bootable CD/DVD to check if the readers is not a malfunction. ?:|

  Regarding the boot from USB.
  Well, I read that this is not possible. You can boot only from HDD, ODD, LAN and USB FDD (floppy)

  Best regards

• Carpet * a UJ-830 cannot read/write DVDs on Equium L10

  Hi, I have a laptop Equium L10. My DVD RAM mast * a UJ 830 cannot read/write to DVD discs. But it can read and write CDs.
  I have installed the latest driver but no luck. Any suggestion will be appreciated.

  This problem appears since day one?

  I ask because it looks like a hardware malfunction, to me it seems that the lens can not calibrate properly and that's why the drive can read and write DVDs.
  What burning software do you use?
  For the most part a burning like Nero program provides an error message if the burning process failed

• Portege M500 - cannot read overburned DVD + r

  Hi all

  running a Toshiba Portege M500, WXP SP2, the v3.30 BIOS Home
  Matsu * a DVD-RAM UJ-842 drive with firmware 1.01.

  My problem is that the drive will not read overburned DVD + r - reports "disk may be corrupted or using a format that is not compatible with windows."

  Discs read fine on desktop (Sony DRU-810 has, 1.0E firmware), IBM Thinkpad Combo drive, and sweep good PIE/PIF graphics. So I think it's a compatibility issue with the player on the Toshiba firmware. I rarely overburn by more than 30 MB, so there is a lot of writing on the left surface.

  Any chance there is an updated firmware that improves compatibility of the player on the Toshiba?

  See you soon,.
  C.

  Hello

  I put t know if the firmware update will help you but generally it s not the best idea to burn on the media.
  Drive hard internal don t support each CD or DVD and in my experience the reader on the portable internal lens is more sensitive than on external drives.

  In my opinion, you should try to burn data to DVD + R properly and not overburn

• Qosmio G20-139: error creating DVD with MCE

  Hello

  I'm having a problem DVD creation with MCE. I followed all the links, trying to save my recorded TV progs.

  I get on well, until it starts to create a DVD. It only happens to 1%, then he rushes up to 100% and after about 30 seconds it says "dvd creation error".

  I use a G20-139 and the dvd drive is a carpet * a dvd - ram uj846s.
  Help.

  See you soon

  Ogilvie

  Hello

  It is not easy to say what the problem is here, but in my opinion, you should try to use a third party burning application, try to create DVDs.

  I can recommend Nero Express. I tested it on Qosmio G20 and it works perfectly. I also have very good results with Ulead DVD MovieFactory 5. It works perfectly.

• Qosmio F20 cannot read CD copy

  I need help with this problem > why this CD-ROM on Qosmio F20-138 cannot read any CD copy? Orginal CD is readable.
  Is this the CD or driver problem?

  This ability of problem because Windows XP default CD burning
  Try disabling default CD Burning capability
  If you have a good CD burning software, you can turn off the CD burning feature. There are two ways to do this:

  REGISTER METHOD:
  In regedit, go to [ntVersion ntVersion\Policies\Explorer] and look for the key "NoCDBurning". Maybe you find there if this is your first time. In this case, create a new DWORD "NoCDBurning" key and set its value to turn it off.

  ANOTHER METHOD:
  Go to your windows Explorer and locate the drive corresponding to the CD - RW drive. Right-click on it and select Properties. In the Properties window, go to the recording tab and you will see and option called "enable CD writing on this drive". If it is selected, deselect it.

  Restart your computer
  and don't forget to update your computer with the latest updates from Microsoft

  http://windowsupdate.Microsoft.com/

• Cannot read CDs/DVDs, get the error "file does not have a program associated with it for this task" under XP

  Cannot read a cd or dvd to print

  Hi WayneMarkland,

  ·         What happens when you try to play an audio CD?

  ·         How do you print DVDs?

  ·         When exactly do you get the error message?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• Satellite A30: Canoe start Recovery CD - cannot read disc information

  My a30 is about six years old.
  About two years ago, I used the recovery disks to format and reinstall windows xp
  I'm trying to do the same thing again now, but a window appears saying "can't read disc information.
  What could have happened to cause the a30 not to recnognise the disc? (he continues to recognize other discs)
  hope someone can help me
  Carl

  Wait. window saying "can't read disc information! ???
  How have you tried to use the recovery CD? Have you tried to start the recovery of the Windows operating system?

  Sorry, but something like this is not possible! You have to BOOT UP from the recovery CD to install the new OS!
  But beware, the recovery will format and remove the data from the HARD disk.