Qosmio G20 - could not get the video to display on the LCD screen

I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

In Control Panel open to the screen. Properties
Number chosen 1 - multiple monitors GeForce Go6600 video card...
Advanced under
the GeForce G06600 tab,
nViewDisplay Mode: clone 1 a 1 b
The main screen: digital flat screen
Secondary display: AH191

I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

Advertisement

Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

Is there something wrong with the DVD player?

If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

Tags: Toshiba

Similar Questions

  • JBOD Qosmio G20 - could not initialize the disk of 320 GB - 1RAID-0

    Hello, comrades Toshiba users,
    at first, I apologize if this question has already been answered, but I did not find the answer to my problem.

    One of my colleagues has a Toshiba Qosmio G20 with two 80 GB drives. Big 17-inch "surf-board-sized" computers laptops are not my cup of tea, but the Qosmio him quite well served.
    We tried to upgrade the two hard drives of aging in his laptop. With considerable experience in replacing the readers of the laptop, I didn't expect no particular surprise, but I was wrong.

    We tried to replace the original disks
    Bay 1: 80 GB Fujitsu drive, System
    2: 80 GB Fujitsu drive, data, RAID off the coast of the Bay

    with the new
    Bay 1: 320 GB WD Scorpio
    WD Scorpio 2: 320 GB drive Bay.

    The BIOS of the G20 is v1.30, the latest version. It recognizes new readers-, but one of the new marking as 1RAID-0 disks fails. After trying to "initialize" the 320 GB drive in bay 1 as 1RAID-0, on the third page of the G20 of BIOS, there is a disk activity, but the drive remains in JBOD mode.

    Unable to mark the drive of 320 GB 1RAID-0, I am unable to use the 320 GB drive as a system disk.

    If the original system drive is cloned on a new 320 GB drive, that it does not start. Starting XP * begins * but subsequently fails with STOP 0x7B - in other words, the infamous blue screen INACCESSIBLE_BOOT_DEVICE when the Toshiba RAID driver is loaded during Windows startup.
    Plain vanilla CD, of course with slipstreamed windows installation driver Toshiba, impossible rest. Installing Windows don't "see" drive in Bay 2.

    When the drive system is put in the high Bay and G20 is started from it, Windows XP starts correctly. The drive in Bay 1 is accessable from Windows, however, remains offline in the RAID from Toshiba console. If the start player in Bay 2 is not an option, too.

    A similar problem, where the owner could not install a system of 200 GB drive is described here
    Link: http://tinyurl.com/38wokw
    The owner, however managed to install a 100 GB drive and we have resorted to 80 GB of disk as a system disk and the only player upgrade in Bay 2 to 320 GB.

    I understand what happens when the disk is 'initialized' in the BIOS. Only brands of BIOS of Toshiba disk 1RAID-0, and it breaks down on 320 GB drive. I will refrain from expressing my opinion on this practice.

    My question is - if it is possible, how * manually * mark the drive of 320 GB 1RAID-0?
    Using a hex editor, dd or something similar is no problem. A partial answer would also know the disc more large size which * can * be marked with success under the name of 1RAID-0 at BIOS G20.

    Thanks in advance.

    Hello

    I m not 100% sure, what could be wrong by presumably 320 HARD drive size might be too big!
    How about the 100 GB or 120 GB hard drives?

    I think you should consider it because usually most of the BIOS supports a HARD drive size limitation and therefore not all sizes are supported.

    But note; using the configuration of 1RAID-0 (striping), met by the operating system size is twice more only if the smaller of the two HARD drives in RAID configuration. Using RAID-0, all data on both disks will be lost, even if it is training of two disks fails.

  • Qosmio G20: How to get the higher screen resolution on monitor external 22 "

    I have a Qosmio G20 and today I bought a Samsung 226BW the external display. The Samsung has a max resolution / optimal 1680x1050px. The manual SAIS the laptop Toshiba supports a resolution of the external display up to 2048 x 1536...

    I tried now all sorts of settings, but the highest resolution I get on the external monitor is 1440 x 900 (-even as the laptop).
    1440 x 900 display 22 '' is not enough for serious photo editing;. It seems simply blur.

    What I am doing wrong? I deeply appreciate answers/comments; because if 1440 x 900 is all I can get, I have to return to the external monitor to the store...

    If someone is so good!
    Espen.

    Hello

    The available screen resolution depends on the graphics driver. You cannot choose the favorite one from the 1680 x 1050 resolution because it doesn t graphics card driver supports.

    Perhaps an update of the graphics driver could help.

    By the way; an inf file must be provided by the manufacturer of the monitor. You can install this file right-click and choosing install.

    Check also these forum discussions:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570&MessageID=71767

  • HP Jet 13: could not get the usable screen after you enter the password when you restart

    After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

    That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

    Please let me how to restore my system or to whom to return it.

    Thank you

    The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

    Hello

    Try the following.

    Boot the computer normally and log.

    Black screen, hold down the ctrl and alt keys and press delete.

    Select Task Manager.

    Click on file and select the new task.

    Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

    When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

    If the above is not correct the problem, try to run the steps in the link below.

    http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

    Kind regards

    DP - K

  • Could not get the opening screen, get a white screen as "No matter what web Print"

    Everything was fine until I tried to load "Any Web Print" without success. After that, all worked fine except
    Firefox. When I click on the icon I get what looks like a blank screen of any impression of web and I can't
    get rid of him. I've deleted and reinstalled Firefox, but I still get the same blank screen. I removed something
    all web related to "Samsung" Print and restarted but when I click on Firefox, I still get the same blank screen.
    Any help to fix this would be greatly appreciated.
    Thanks in advance.
    Bill

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    For Firefox versions prior to 29,0:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the "Reset Firefox" line

      button.

    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    For Firefox 29,0 and above:

    1. Click the menu button

      click Help

      and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.

    2. At the top right of the page, you should see a button that says "Reset Firefox"

      . Click on it.

    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • Could not get the on screen keyboard to be extinguished before logon

    After exploring the features 'accessibility', it seems that the on-screen keyboard now appears by default even before the connection. I can't seem to get it out. I tried the ease of access button then no by selecting the checkbox and select apply... always there at the next startup. I tried to click OK instead of apply... always there to my new account activation. I guess that's not a disaster, but it's annoying. Got any clues how I can turn off for good?

    You click Save.

    http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

    Look at the tutorial above.

    See you soon.

    Mick Murphy - Microsoft partner

  • I can hear a wav file, but could not get the video from my camera.

    original title: file WAV on Vista

    I can hear a wav file, but could not get the video from my camera.

    I have windows vista?

    Hello
    WAV files will be audio only.
    You can save this file as an MP4.
    B Eddie

  • I have a 64-bit system running Windows 7. I could not get the AutoPlay to open whenever I insert a CD or a DVD.

    I have a 64-bit system running Windows 7. I could not get the AutoPlay to open every time I insert a cd or a dvd, I changed the settings to Ask Me to Windows Media Player to open with Windows Explorer... but nothing I tried introduced the feature of AutoPlay to life.

    Is there a solution

    original title: AutoPlay Windows 7

    It worked for me: I forgot where I got it, could have been here if it's a little different from what I've seen above

    PIECE AUTO REPAIR
    USING GROUP POLICY EDIT
    gpedit.msc in search
    Computer Configuration\ Administrative Templates\ Windows Windows\ Policies\ will disable Autoplay.

    In the REGEDIT HELP: Group Policy Editor is not provided with Windows Home editions, however, you can use regedit to achieve the same result.

    Open regedit and locate the following key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer

    Change: NoDriveTypeAutorun to 0 x 91

    If necessary, create this key as a DWORD.

  • Spore origans. But they could not get the disc to download

    Original title: I installed the origans downloads spores then tried to combine with my set of spore origal disc I can do that I prefer to use my disc that the download, but could not get the disc to download

    Windows 7 Edition home premium

    Hello

    EA Spore games are you referring?

    If you are referring to the games EA Spore, I suggest you check the link for support:

    https://help.EA.com/en/spore?sso_redirect=1

  • •EPMCSS-05261: could not get the information of the Aboriginal group.

    Hello

    Recently, we migrated user 11.1.1.3 11.1.2.3 version version.

    I tried to open one of the groups and clicked on the tab user membership in the group. I got the error message in the new version 11.1.2.3 below.

    «•EPMCSS-05261: could not get the information of the Aboriginal group.» Error getting to some of the affected user entries. Check the configuration and user directory State.

    Please could you let me know why we get this error message and no impact on the safety of the user.

    Thank you

    Michel K

    Read through the following Oracle Support document - "EPMCSS-05261: could not get the native group information (Doc ID 1619561.1).

    See you soon

    John

  • Re-installation of creative suite all-in cs6, I get the error: Exit Code: 7 ERROR: DW013: could not get the root of inChildPath

    System:

    Windows 7 (Service Pack 1)

    3720QM-i7 CPU @ 2.60 Ghz

    16 GB OF RAM

    Adobe Creative Suite Production Premium CS6

    I got a computer breakdown and both after effects and the first started crashing after that.

    I uninstalled then and since then I can not reinstall. I get this error message:

    Exit code: 7

    ERROR: DW013: could not get the root of inChildPath

    I tried:

    1. 1- Repair of Microsoft Visual C++ Redistributable Packages
    2. 2- Uninstall Adobe AIR, then reinstall the AIR and the Adobe help
    3. 3- I tried to use the vacuum (running it as an administrator but but it does not open)

    What is my next move?

    I have work to do.

    Thank you

    Stefan Vanderland

    Code 7 https://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

  • Unable to get hardware information for the selected with vmware converter 5.5 computer (could not get the ability to \\.\PhysicalDrive0: error opening peripheral drive: 32 an unknown error (0 x 20) (32))

    Hello

    I'm doing a P2V with vmware converter standalone 5.5

    The source is the same machine that hosts the vmware converter 5.5

    The operating system is W2003 which acts as a domain controller

    VMware converter is launched by the administrator account.

    The error that I see on the balls of vmware - converter.worker is:

    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [info 04344 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive0."
    2014 02-13 T 17: 36:35.592 + 01:00 [04344 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:35.592 + 01:00 [warning 04344 "Default"] jump drive hard "\\.\PhysicalDrive1."
    2014 02-13 T 17: 36:41.155 + 01:00 [warning 04344 'Default'] attention: no attached disks have been detected.
    2014 02-13 T 17: 36:41.155 + 01:00 [04344 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
    2014 02-13 T 17: 36:41.170 + 01:00 [info 04344 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
    2014 02-13 T 17: 36:41.170 + 01:00 [04344 error "Default"] unknown exception when calling VMOMI method queryComputerInfo
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.358 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a0a1-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{18297536-8c0b-11da-8528-0014852d7e43}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{caf5e9f8-4e6c-11dd-b440-0014852d7e43}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{2958b89a-b562-11dc-a508-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09f-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.389 + 01:00 [info 05648 "Default"] Found volume with name '\\?\Volume{0395a09e-8c42-11da-a7d7-806e6f6e6963}\ '.
    2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.421 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
    2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive0: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.452 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive0".
    2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] could not get the ability to \\.\PhysicalDrive1: error opening disc device: 32 an unknown error (0 x 20) (32)
    2014 02-13 T 17: 36:50.499 + 01:00 [05648 WARNING "Default"] Skip hard drive "\\.\PhysicalDrive1".
    2014 02-13 T 17: 36:56.155 + 01:00 [05648 WARNING 'Default'] attention: no attached disks have been detected.
    2014 02-13 T 17: 36:56.155 + 01:00 [05648 error 'Default'] [LiveWindowsComputer] could not find disks connected to the computer.
    2014 02-13 T 17: 36:56.155 + 01:00 [info 05648 "Default"] scheduled timer cancelled, succeeds StopKeepAlive

    This had already happened with another server (also W2003 DC), but the hardware was completely different; Unfortunately, I wasn't able to solve this year here.

    Any help or advice would be appreciated, thanks in advance

    Thank you for all your help

    I finally found the guilty service.

    It was pcmonitor monitor/remote control software. Once I stopped it is service vmware converter could get the capacity of the physical drives.

    It is rather curious because I made several servers P2V conversions using this software (so far the last one two weeks ago - the difference between that server and this one was that the first was not a domain controller).

    Hopefully this thread will help others in the future.

  • Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite

    Try to update CC 2015 without success.  Update could not get the following error U44M1I210.  Tried several times on 2 Mac running Yosemite.  Any ideas?

    U44... Update error http://forums.adobe.com/thread/1289956 can help

    -U44 more... discussion http://forums.adobe.com/thread/1275963

    -http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

    -http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."   I received this message during indexing on my computer.  I could not get the message, so I uninstalled Adob

    "Adobe Acrobat Reader DC cannot open 'amy application' because it's a non supported file type or because the file is damaged."

    I received this message during indexing on my computer.  I could not get the message, so I

    uninstalled Adobe.

    After you have uninstalled Abobe, I was able to get all my jobs and applications (with the exception of adobe files).

    Then I tried to re - install Adobe, but who has turned to a complicated procedure.

    There are so many choices, and there are a number of downloadable updates. What was I guess what to do?   But I have chosen one of the Adobes and tried to install it.

    After that I don't know what happened.  All my desktop icons are now Adobe icons in place.   that is The Firefox icon is now replaced by an icon of Adobe.  It is the same for several other desktop program icons. (QuickTime, chrome, Internet Explorer, etc.)

    When I try to open the program by clicking on it, I get the above message.

    I went to the site of help from Adobe and read a complex string of instructions, including

    words like '% pdf', "DWROD" and, for me, other nonsensical words and phrases.

    Needless to say that the instructions were no help.

    I said all that to say this.  I want that my computer back.  What should I do to do?

    Sincerely,

    Ralph Thompson

    [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

    [This is an open forum, not the Adobe support, please do not post personal information]

    [If you send messages by e-mail, please turn off your "sig file" function for display]

    This may help: Application, file icons change in Acrobat/Reader icon

  • Error "could not get the audio data in the file.

    Hello

    I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

    I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

    Where can it be?

    Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

    I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.

Maybe you are looking for

  • I can't use safari during a phone

    I used to be able to talk to someone on the phone on speaker and go on Safari, Facebook, etc. Now, for some reason I can't do both at the same time please help

  • A6700z drivers for Windows XP Pro x 32

    I'm moving my x 32 Vista a6700z XP Pro x 32. I was able to find the nForce for XP driver: http://www.nvidia.com/object/nforce_winxp_20.09.html That little got all my drivers my audio and my network/ethernet. I can't find a driver for my network card.

  • When you transfer overdrive mp3 audiobook, receive the OxCOOD2772 error code

    When att. to transfer overdrive mp3 audiobook, "has a problem OCC in obt. OxCOOD2772 of devices CERT error code. ».

  • HD T410s graphic problem after update

    A few days ago, I decided to update my 2011 T410s by LenovoToolbox. I was looking for solutions to improve the battery life. I havehas chosen to update all 'important' and some option updatesthose I thought that could have an impact on the battery li

  • Easy transfer of Vista Business to Windows 7 Professional

    Hello Trying to use the easy transfer of Vista Business to 7 Profesional and tried to download the disk online, the easy transfer software, and Belkin but it does not load. I use the wrong version?


HashFlare