Qosmio G20, G25: video update possible?

Is - this qosmio g-series allows video editing?

Hello

Did you mean the graphics card?
To my knowledge it of not possible to update the graphics card on laptop computers.
This theme has been discussed many times in the forum. Please check the other assignments.

http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3738&MessageID=11988#11988
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3128&MessageID=9582#9582
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6491&MessageID=22426#22426

Good bye

Tags: Toshiba

Similar Questions

  • Qosmio G20: D-video pinout?

    Hi Qosmio users, I tried to exit D1, D2, D3, D4 resolutions on a HD-ready LCD TV without success. I can standard PAL output through the D-out socket at the rear of the Qosmio, using the Scart-to-D cable, but when I out 480 p, 720 p, 1080i,... the LCD TV is out of sync.
    I know the TV is able to receive 1080i signals, I tested it with a HD video recorder (using the component outputs).
    So, I checked the cable SCART-to-D and found that he's wearing only a composite video signal (the signals audio left and right).

    Some people have suggested to buy a D-component at the Japan cable, but I don't understand how this could work since it seems that the plug on the Qosmio D is not the standard D4 connector as described on http://en.wikipedia.org/wiki/D4_video_connector
    (there's no audio signals to these connectors to D4).
    So, I'm looking for the pinout of the connector D Qosmio...

    Also, I wonder if the Japanese D1, D2, D3, D4 analog HD standards are supported by European HD-ready TVs?

    Thanks for any response,

    Fabrice

    Hi euphoric1.0

    Please consult the Documentation of your Panel, if this is possible
    to use the hdtv via analog input resolution (as the SCART).

    Yesterday a friens asked me on a LCD Panel and for the
    description that I saw that it supported HD-res on analog inputs.
    The sony bravia diplays-descriptios tells that they accept hd-res on analog input but I have not any opportunity to test.

    hope that helps you a bit.

  • Qosmio G20 - how to find an update for the video card?

    Hi I can't find the update for the video card and when I run the game it hand me your video card drivers are too old.update them.
    my laptop:(toshiba Qosmio G20)
    My vidoe card: (NVIDIA GeForce Go 6600)
    Operating system: (Microsoft Windows XP Professional)

    Hey,.

    To be honest I don t understand your problem. Why visit nVidia?

    All you can download it from the download page of European driver from Toshiba as a boarder suggested. I even checked this and for Qosmio G20 and Windows XP you can get all the drivers no problem at all! :)

  • Qosmio G20 - stucks HD video playback for 2-3 seconds

    Hello

    I have a laptop Toshiba Qosmio G20 installed win - 7 on it and its fine to work without problem.
    But when I try to play HD videos, it's playing a little and then blocked for 2-3 seconds it continues and once stuck again.

    Can I upgrade my graphics card which currently is NVIDIA Geforce Go 6600 with 128 MB of RAM.
    I tried with the latest NVIDIA graphics drivers but no luck.

    Please advice
    AERTS

    I noticed the same thing on my Satellite P200. Just at the moment where I use maximum CPU performance (power management high performance) I can watch it without any problem.

    Can you please test it on your Qosmio?
    Qosmio G20 is old enough laptop model, so I don't think that the driver updates are available.
    I think we have of old notebooks boyfriend. ;) Might be time to buy new equipment.

  • Qosmio G20 = video cable component and videos in high definition with Pinnacle

    Dear everybody
    I bought my Qosmio G20-120 of the Poland that came with D video cable SCART. This cable is only capable of transferring video signals (CVBS) which is pretty useless, because Qoismio already has a S-video out... What is the best simple video production I can get to SCART.
    According to www.toshiba-europe.com Qoismio is supposed to have video output component. But it comes with cable SCART instead. I always try to make this component video cable D-video of the Distributor. If I don't succeed, does anyone know if and where I can buy this cable in Europe? Or is it possible to make a video component with the D-video out D-video cable with cable SCART?
    Everyone last tried the channels high definition DVB-S on Qoismio using USB 2.0 DVB - S TV Card.Any opinions on Pinnacle PCTV 400e?
    Thank you

    Hello

    Sorry, but I don t agree with you. SCART in my opinion is always better than S-Video. As far as I know cable SCART can transfer image and sound and picture just S-Video. Am I wrong?

    In my view, it's great that laptop Qosmio has two video ports and each use can make a choice.

    Another way your ad is a bit confusing to me. Qosmio G20 includes a section on the port (D-video) and as far as I know the original cable must be provided. You can see on this page http://support.toshiba-tro.de/KB0/TSB4A00TK000MR01.htm

    Using this cable you can easily connect your laptop to the TV.

    Also check this http://support.toshiba-tro.de/kb0/FAQ5300XK0012R01.htm document
    It can also be interesting and useful to you.

    Good luck!

  • Can I reset the update of the firmware on Qosmio G20?

    I have a Qosmio G20 and I think that something was wrong when I updated the firmware.
    Now, I have no operating system. Is it possible to reset the firmware?

    Type of CD-rom is MATSU * A UJ-846-C

    Hello!

    Why you don t have an operating system if you have updated the firmware?
    I'm a little confused on this, because the update of the firmware doesn t affect the HDD m functionality

    That you get an error message before you try to start in Windows?
    If not try to load the defaults in the BIOS as athan1001 said and please give us more details.

    Good bye

  • Updated tv card Qosmio G20 105

    My beloved G20-105 came with an analog TV Tuner card and I want to update card Tuner TV DVB - T.

    Is it possible and simple it is to get out the old and its replacement by a new?

    Also where can I get one?

    Hello

    In my opinion that's not really easy I think that it s not worth trying it.
    Why? Because the TV tuner module is hidden somewhere in the notebook.

    You will need to disassemble the whole to get access to this module.
    You also need a compatible TV tuner module and a new Board of antenna that would correspond with the layout of the motherboard Qosmio G20.

    These modules are not cheap and I think an external solution like USB DVB - T stick would be much cheaper and better solution for you.

    Welcome them

  • New updates of drivers for Qosmio G30, Qosmio G20, Qosmio F30, Qosmio F20

    New updates of drivers for Qosmio G30, Qosmio G20, Qosmio F30, Qosmio F20

    TV Tuner Version 1.0.5.1340 Date 10/19/06

    Are solved the following problems drive TOSHIBA PCI DVB-T/analog hybrid Tuner: * computer may not detect the digital television signals in England.* after the setting for the reception of DVB - T in MyTV of MCE and break-in Video Capture WinDVD Creator2, DVB - T reception may become unavailable following MCE running.

    Intel Wireless Lan Driver Date 13/10/06

    Hi Reaver

    Thanks a lot for your information. It s very useful! A.-J.
    But where did you get this info? Using knowledge Toshiba Web site?

    I always check the knowledge Toshiba Web site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2

    There I found also some info on the various strange problems.

  • Qosmio G20 - update Tuner TV digital?

    Hello

    I have the Qosmio G20 and unfortunately it only support analog TV. I wrote to the Japan Toshiba here and they said that it is not possible to upgrade the G20 to digital television.

    It is the official manufacturer of advice, but as I know from experience, there is always another way around these things using third-party hardware and software.

    Anyone have any ideas on how this could be done?

    Hello

    The Qosmio G20 series was delivered with different hardware compatibility.
    Some of the G20 has been delivered with a TNT antenna + analog hybrid TV Tuner and DVB - T and other G20 supports only analog TV.

    Well, if your computer laptop doesn t supports digital Tv then you can try to use the tuner TNT + external.
    I sure you will find plenty of m offers in the internet.

  • Qosmio G20: Is it possible to activate the FM radio?

    Is it possible to allow radio FM on Qosmio G20 reception. Any upgrade of the equipment or accessories?

    Hello

    As much as I know, that you cannot receive FM radio. There is only one TV tuner installed.
    Qosmio and the MCE software player is able to watch the TV to not receive FM radio.

  • Is it possible to directly connect dish Qosmio G20?

    HY everybody,

    I have a Qosmio G20-PQG21. The receiver is 60 metres from the position of the laptop. In this case, the channel is not editable. The problem that this person wants to change channels. The problem is quite simple... can I connect the coaxial cable from the dish directly to tv tunner and setup guide? or do you have another solution for my situation?

    Thanks in advance

    Hello

    In my opinion it of not possible connect the cable satellite directly the Qosmio.
    You are also unable to connect the TV directly with the satellite dish. It of the same case on the laptop. You need a receiver sat between the laptop and the flat sat.

    There are two possibilities:
    1.), you buy a longer cable from the satellite dish to the receiver and place the receiver closer to the laptop.
    2.), you place the laptop more near the sat receiver ;)

  • Question about updating the BIOS for Qosmio G20

    I downloaded the updated the BIOS of my pc, not the Qosmio, the instructions say it will unpack into 3 files, one being a floppy disk installation. When I unzip on my desktop pc, it makes a file that s too big for a floppy and he won t unzip further because it locks up my pc.

    Is it safe to make it work on my desktop pc it can unzip then in the three files and this will affect my BIOS or y at - it somewhere that I can download the floppy part on its own to load on a floppy?

    Hello

    Just a question;
    You have downloaded the Qosmio G20 BIOS on the desktop computer, unpacked and now you want it please on the diskette in the floppy drive.
    Is this good?

    So now my suggestion;
    Firstly that the Qosmio G20 BIOS and other BIOS Toshiba cannot be updated using the floppy! This isn't traditional BIOS!
    The BIOS from the Toshiba page must be updated when the Windows operating system is running!

    By the way: you can unpack the BIOS on your desktop computer, but don t try to run all files, because the bad BIOS can damage the motherboard ROM module!

  • Qosmio G20 - could not get the video to display on the LCD screen

    I have a laptop Toshiba Qosmio G20, running Windows XP MCE.

    The DVD player on board isn't sounds very well so I thought I would plug an external DVD drive to expand its use. After a lot of internet research, I finally found how to do this. Here's my setup.

    Using the monitor port I used the adapter 3 RCA jacks. (There is no S-video on the DVD drive and an adapter did not work). I finally discovered that in order to get the image on the screen, I have to use Fn + 4. Now, here's where I'm having the problem. I can't get the video to display on my external LCD. FN + 5 didn't do. The monitor is an I - inc AH191D and is connected by VGA cable. There is no driver other than the one for the VISTA operating system... That is why it is not anywhere in the Device Manager.
    Here are the settings I use in order to have all that shows on my desk, shows on the monitor.

    In Control Panel open to the screen. Properties
    Number chosen 1 - multiple monitors GeForce Go6600 video card...
    Advanced under
    the GeForce G06600 tab,
    nViewDisplay Mode: clone 1 a 1 b
    The main screen: digital flat screen
    Secondary display: AH191

    I also tried using the properties of controls on Toshiba. He says under TV output TV output but gives options of the program, but I don't know what I would use. Any ideas out there?

    Wait I'm confused, if you try to send the output of your external DVD drive in the laptop, and then display the image on an external monitor attached to laptop?

    If you use the DVD player on your laptop, it will be good quality S-video as a signal of low resolution.

    Is there something wrong with the DVD player?

    If it's just the DVD software you don't like, you can download other DVD players. PowerDVD is excellent, its better than WinDVD and other players in my opinion.

  • Multimedia "Video Controller" error Qosmio G20 & NO sound

    I have a brand new Qosmio G20. It has been properly installed according to list of instructions installation of Toshiba (all listed in the correct order.

    Unfortunately, whenever I start (WinXP Pro), I received a message that the system has detected new hardware. In the presentation of the material, it lists a "video-controller as" and a "PCI device" that it has not been installed correctly. I tried to solve this by downloading all kinds of latest drivers on the Toshiba site. But apparently the system is still missing some drivers, although I can't know who they should be. Also in this situation, I have no sound available. I tried to reinstall the audio driver. But at the end of the installation procedure, it says that the driver is not found and leaves the facility?

    Help, please...

    Hello

    If you want to identify an unknown in the Device Manager device please read this document:
    http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

    In addition, this laptop came with Win MCE. Have you installed the driver on the right its designed for Win XP?

    Best regards

  • Re: Qosmio G20 - installation of a multimedia video controller

    Hi friends

    I tried to install my Qosmio G20 Windows XP (ECM) with PCI device...

    Multimedia video controller PCI.
    USB device.
    I manually installed and mapped the path of the pilot to "" C: / cd tools "ยป
    It gives me an answer that the driver is found for the device and get finished...
    So what am I suppose to do now and to operate...

    Tanx in advance
    Raja

    Hello Raja

    To be honest I'm a bit confused now. As much as I know folder Tools CD is available if the laptop is preinstalled with recovery media. So please can you me something about this?

    Have you installed image recovery or your own version of Windows XP Home edition?

Maybe you are looking for