Qosmio G20 - Microsoft Media Center Edition - ehExtHost.exe error

Similar Questions

• Qosmio G20 - its Media Center does not work properly

  I do not often use the TV tuner, but when I went to save a program of the week last I found that I was getting loud hissing and sound distortion. Although I could play back a few straight recorded music.

  I ran the TV Tuner, settings and which seemed to cure her.

  I wanted to watch this program and I found that I was getting the loud hiss once again and when I run the program saved it seems to run fast. But now recorded music also does not work.

  I ran settings again but no difference this time.

  I open the Volume control window

  Adjust balance on volume control and hissing on the channel left and music distorted on right channel - running pitch fast and high.
  When the track ends then the hissing sound stop

  If I set the controls of the wave
  Keeping your balance no effect now, whistling on the left and right
  Adjust the volume affects track music, but no effect on the whistle until right down when he cut the sound it
  MUTE button mute puts the two

  Registering the program is OK if played using Windows Media Player.

  Any suggestions as to what could be bad?

  PC running Windows Media Center Edition

  Windows all sounds have been affected, that is when I ran some of the Windows Panel I just got a burst of noise. As soon as I closed the library was back to normal

  Martin

  Post edited by: mbriscoe

  Hello

  I m not 100% sure if I understand the problem correctly, but it seems that the problems of sound appears only when you use and play audio files with Windows Media Center.
  The sound is ok, when you play Windows Media Player. Am I wrong?

  Hmm maybe, there is a registry or application malfunction.
  Try to update the TV tuner driver and audio driver.

  You can remove the sound card in the Device Manager and after reboot, install the latest version of the sound driver.

• Cannot install sp3 on xp media center edition. 0x87FF054F error code

  I tried to install XP SP3 and receive an internal error message. Next, I get the error message that it could not install. Any help would be appreciated.

  Hi greenleaf2976,

  You can check if this article helps.

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• Qosmio F30: How-to: Manual Installation of Windows Xp Media Center Edition 2005

  Manual installation of Windows Xp Media Center Edition laptop Toshiba Qosmio F30 computer 2005
  Last updated October 3, 2006

  Important notes before starting:

  1 - the steps used for "Toshiba Qosmio F30" and for others models Qosmio that comes with "Intel Centrino Duo" Cpu and Xp Media Center 2005 installed.

  2. apply these steps if you have previous experience in the installation of Windows Xp, if you have that experience, then you can use the provided recovery CD to restore your system.

  3 - Windows Xp Media Center Cd is not provided with your laptop, if you have the Cd you can purchase from many online shops and in this case you will get the product key valid Windows Xp which you'll not need (because you already have one, you will find in it a small sticker on the back of your laptop and you can activate your Windows with it).
  In other words (you need for the first and the second Cd of Windows Xp Mce 2005 SP2 Oem).

  4. do not try to implement these measures on the other Versions of Windows Xp, use "Windows Xp Media Center Edition 2005 Sp2 Oem" only

  5. you must have the Usb floppy drive to install "Toshiba Raid Controller", it can be installed that by having the driver on a floppy disk and pressing F6 during the setup of Windows Xp, if you do not install the Raid driver then will Windows Xp does not recognize your hard drive.

  6 - notice of disclaimer
  I don't will not be responsible or liable, directly or indirectly, for any damage or loss caused or allegedly caused by or in connection with the use of this site or its content, including but not limited to delays, omissions and inaccuracies in content.

  Steps to follow:

  1 create drivers Cd of "Toshiba help utility", you should see the Toshiba help icon on the desktop, and then in the Toshiba help choose the "protect & difficulty" tab, you will find the Option ' create drivers & tools Cd "and insert a Cd Virgin to write to this
  "If this Option did not work, then you must install the restore Cd to get this job", the drivers are installed in a folder called Toolscd in the C:"" drive. To install your recovery Cd Power on your laptop and the "F12" hold and use the arrow keys to select the icon of the CD to boot from the Cd.

  2. create the Toshiba Raid since the driver Cd driver, the Toshiba Raid driver must be added during the Installation of Windows XP when they are asked to "Press F6 if you need to install a third party SCSI or Raid Driver".
  To do this, insert the Cd of ' Windows' drivers, it will run automatically or Run "Browser.Exe" inside the Cd The 'Raid Driver' and click on Select 'Installation', it will show you the Raid driver files, insert A Blank Floppy and copy the files in The Floppy 'To be sure that all the files be on the root of The Floppy' or to download the Toshiba RAID driver from the Toshiba web page download driver and extract the file zip on a diskette. Yet once, all files must be at the root of the floppy disk not in a folder"

  3 - Connect your Usb floppy drive and insert your Cd of Windows Xp Mce 2005 1 turn on your laptop Hold "F12" and use the arrow keys to select the icon of the CD to boot from the Cd.
  When you get the Message «Press any key to boot from CD...» ", press a button, if you do not press a key, it does not start from CD-ROM, press F6 when prompt to 'press F6 if you need to install a third party Scsi or Raid Driver".
  The Setup program continues until you are asked if you want to "S = specify additional device. Press' and specify the driver Toshiba Raid for Xp. press "enter" to continue with the Installation.
  Do not upgrade your Installation of Xp, start new Windows Installation and Partition on your hard drive, Windows Installation will be ask you to insert Cd 2, and will copy some files and will ask continue you to insert Cd 1 once again, with the installation until Windows finish the installation of the.

  4 - after Windows finishes the Installation insert the Cd drivers and select "Microsoft Updates" from the Drivers Cd click 'Installation' button, click on "Qfe" and ONLY install the following updates (don't let the updates restart your PC until you have finished installing all of the updates)
  A Q896256
  DIFFICULTY 'computers that are running Windows Xp Service Pack 2 and that are equipped with multiple processors that support processor power management features may experience decrease in performance'
  B Q910437
  DIFFICULTY 'High Hit Count Watson Crash in Wu Client '.
  C Q889673
  DIFFICULTY "Hardware (Dep) - computer activated may quit unexpectedly after recovery from sleep mode or hibernation in Windows Xp Service Pack 2"
  D - Q896243 (very Important, this will make SD and MMC cards for work)
  DIFFICULTY "ADD Support high-speed SD card"
  Other updates are not required to install, because you will install it later when you run Microsoft updates website updated Microsoft after finishing to activate your Windows.

  5 - Download and run "Intel Chipset Software Installation Utility' of the Intel Web site
  (Restart your PC after Installation)
  Do not install "Driver Chipset" since the drivers Cd, this is an old Version, try installing the most recent from the link above.

  6 - install the "Display Driver" of the Cd of drivers (no need to reboot).
  Note: To avoid annoying Messages to drivers during Installation to do the following: -.
  Go to control panel, system, Hardware, player signature properties, select "ignore - install the software...". »
  Go to control panel, system, hardware, Windows Update properties, select never 'search Windows Update for drivers'

  7. now you must configure your Internet connection and activate your Windows so that you can run "Windows Updates" from the Microsoft Windows Update Web site
  Your Internet may need one of the following drivers (depending on your Modem)
  A if you your Internet through LAN then install the 'network' of the driver Cd driver.
  B if you your grace wireless Internet then install the wireless network driver "" of the driver Cd.
  C if your Internet via USB then install the driver provided by the manufacturer of your Modem.
  D if your Internet through Dial-Up connection and then install the "audio driver" driver CD, this driver will install the audio driver and activate the Modem device and a Message appeared "find new hardware, peripheral Modem" ignores the Message and restart your PC then install "Modem Driver" of the driver Cd.

  8. now, go to the Windows Update Web Site and install all required updates "try to run Windows updates several times until you install all updates, because initially, Web site will updated Windows Installer 3 files only after this restart, your computer and go to the Windows Update Site again and continue to install updates. ", select the custom updates and install all critical and optional updates to date."

  9 - install "Common Modules" of the driver CD this module is an essential component on Windows XP systems, it is necessary to other original programming TOSHIBA works correctly.

  10 continue to install the other drivers and Utilities CD of drivers, but do not install the drivers following: -.
  Atheros Client Utility "no need".
  Bluetooth Monitor "do not install, install only the"Bluetooth Stack".

  Enjoy your PC powerful Qosmio Toshiba laptop.

  Hi Reaver, thanks for the installation instructions wonderful. I think that you have contributed to many users here.

  Ciao

• XP Media Center Edition became totally unstable in the last weeks 3 - to ehrec.exe CPU usage spikes and it stops responding.

  I use this Dell original XPS systems is Windows XP MCE 2002 for 5 years now. The machine is fully patched and all drivers are up to date.

  A symptom is that it will start a program at 7:00 pm registration and registration of the status bar icon always displays this name of program even if by 21:00, it should have recorded 3 other programs and began a 4 t at 21:00. When it does this the minute 30 original program will be more than 2 hours of broadcast recorded on the original channel tuner would not turn stations by the configuration of the scheduled recording.

  ehrec.exe go out randomly to a State where it uses all the CPU resources available without using more memory or to all disk reads or writes. This will normally make ehshell.exe become desensitized and seem to be hung up in taskman. Doing an endtask on ehrec make ehshell to resume working properly. kill ehrec but may end up trashing all current record. I tried the solutions suggested on other forums (C:\Documents and Settings\All Users\Application Data\Microsoft\eHome\EPG purge and empty the E:\Recorded TV\TempRec directory), they have not helped and basically just made me have to reconfigure the program guide. I record only out of local air HD broadcasting stations.

  ehrecvr.log started the recording of these errors:

  [2010-07-14 22:14:52.357] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 22:14:52.357] CDigitalRecorder::Initialize: Get_Init failed 0x80004005
  [2010-07-14 22:14:52.357] CDigitalRecorder (0): initialize: adding Services
  [2010-07-14 22:14:52.357] CDigitalRecorder (0): AddServices: No. GLID Plugin corresponds to this recorder, 0 x 0
  [2010-07-14 22:34:02.691] CRecorder (0): FireTuningChanged:
  [2010-07-14 22:34:02.722] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 22:34:03.753] CRecorder (0): FireTunerStateChanged: 0, 2
  [2010-07-14 22:34:03.753] CDigitalRecorder (0): StartServices: impossible to get for recorder, 0 x 80004002 GLID.
  [2010-07-14 22:34:03.753] CRecorder (0): RunProc: could not start Services, 0 x 80004002
  [2010-07-14 23:00:43.984] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1047 table
  [2010-07-14 23:00:43.984] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-14 23:20:54.120] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1062 table
  [2010-07-14 23:20:54.120] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-14 23:35:19.469] CRecorder (0): FireTuningChanged:
  [2010-07-14 23:35:19.500] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005
  [2010-07-14 23:41:14.231] CDigitalRecorder::ChannelAvailable - Pat is getting old by Mrs. 1672 table
  [2010-07-14 23:41:14.231] CRecorder (0): FireChannelAvailable (FALSE): 0
  [2010-07-15 00:03:04.276] CRecorder (0): FireTuningChanged:
  [2010-07-15 00:03:04.276] CDigitalRecorder (0): GetVideoEncoder: could not get IVideoEncoder service provider. HR = 80004005

  I tried to apply again the Rollup2 patch that was published several years with the hope that run a subsequent manual WindowsUpdate would repatch all but which did not help. The machine has currently a Hauppauge WinTV 418 BDA Tuner (single channel HD) tuner card is installed. The machine came with an Angel TvTuner (dual channel analog) tuner card. I use the HD map for more than a year.

  I really don't want to move this machine to Win7, what other options can I try to do to return MediaCenter work properly again?

  Thank you

  DF

  DF

  I tried all the suggestions above and nothing seemed to clear up the same problem for me. Then I found this proposal it was v4 framework recently developed as a Windows update that may have broken my Windows XP Media Center Edition 2005 on my HP box. http://thegreenbutton.com/forums/p/91307/471286.aspx#471286

  I tried to uninstall the v4 of network and my Media Center works perfectly again since. Not sure if this is the only solution for the others, but of course, it worked on mine.

• Ehshell.exe error with Windows XP Media Center Edition Version 2002, service pack 3

  Running Windows XP Media Center Edition Version 2002 with service pack 3.  I get the ehshell.exe error when I try to watch live TV.  It crashes, debug and I usually won't have to ctrl-alt-del to get anywhere.  Do not seem to have this problem before I added various updates etc, tv was fine before this date.

  I'm not particularly computer so nice easy steps please...!

  Thank you, Nicholas

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  1. • 1

       Click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "system restore."

     • 2

       Click 'Next' in the window system restore for a list of points of restoration which has been archived.

     • 3

       Select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

     • 4

       Click 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

• Cannot open files with Windows XP media center edition .exe

  Cannot open .exe with Windows XP media center edition files.  Computer Dell did not come with a rear disc

  Hi CLueking,

  1. what happens when you try to open any .exe (executable) files? You get the error message?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• Microsoft can't! for Windows XP onWindows installed XP Media Center Edition?

  I own more Microsoft for Windows XP and used on my previous pc.  My current computer is Windows XP Media Center Edition installed.  System requirements for Windows XP Home and professional list.  It will work on Media Center?  Is there an advantage to install?  Reading on this subject, it seems to me that the audio improvements may be the only advantage, but I don't want to install it if there could be other conflicts after the installation.

  for the most part, yes you can install more! XP on a computer with WinXP MCE.
  just be sure to install more! XP Service Pack 1 after installing more for Windows XP.

• When loading Windows XP Media Center Edition 2005, my Lifecam Webcam from Microsoft HD turns on and starts recording.

  Original title: Okay, I bet no one has ever heard of it...

  At the Media Center 2005 Rollup 2 loads, my Lifecam Microsoft HD Webcam turns on and I guess that starts recording. WHAT? What is happening with this? I have Windows XP Media Center Edition 2005, SP3.

  Hello

  -Did you change on your computer due to which the question has begun?

  I recommend you to start your computer in a clean boot State and turn off Microsoft Lifecam Webcam to run at startup HD.

  Note: Don't forget to restart your computer in normal mode by following the steps described in the article.

• I have windows XP media center edition version 2002 microsoft and try to reinstall office XP Professional with Publisher Version 2002, following a fall, but am rejected as an invalid key.

  I have windows XP media center edition version 2002 microsoft and try to reinstall office XP Professional with Publisher Version 2002, following a fall, but am rejected as an invalid key. I checked the key with the customer service - they say that it is valid and has sent me to you! Help please!

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851

  J W Stuart: http://www.pagestart.com

• I got a microsoft windows XP Media Center Edition 2005, and I can't do windows media player 11 basis that I've not updated cumulative 2 where to find this update?

  because it says I need to download the Update Rollup 2 for media center edition units 2005 but I can't find it... can someone help me find...?

  Artistic salvation,

  Thanks for posting. The KB below should explain the update in detail. You should be able to get the update through Windows Update.

  http://support.Microsoft.com/default.aspx/KB/900325

  I hope this helps. If you have any questions please let us know.
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My hard drive has failed. I have Microsoft XP media center edition 2005. How can I get a recovery disk?

  I had a hard disk crash.  I don't care about data loss, but I bought a new hard drive and you want to install Windows XP media center edition 2005.  I have a sticker on the side of my pc with the product code.  How can I get a recovery disk?  Download the program from another PC?

  As your original failed hard drive, you would of course not be able to access any partition contained on this hard drive recovery.  Therefore, your best option is to contact the manufacturer of the computer and see if you can get the installation of their own media.

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Desktop wallpaper disappeared, xp media center edition

  Hello
  I recently downloaded and installed a few xp skins, they work very well.
  I also downloaded a patch to change the taskbar.
  Now my desktop background is gone.
  I tried to do a system restore before all downloads, in vain.
  I have the link to the patch:
  http://www.Softpedia.com/progDownload/UxTheme-MultiPatcher-download-2369.html
  I used the mirror we.
  Topics:
  https://rapidshare.com/files/52953075/Best_Vista_Theme_For_XP.rar
  http://oddbasket.deviantart.com/art/Royale-remixed-44294818
  These are the two themes that I downloaded
  If I close my wallpaper shows explorer.exe
  I don't think that it has nothing to do with the theme packs (could be patch?) that the bottom shows no more with the default windows themes.
  I use xp media center edition (2002)
  PPP
  2 GB of RAM
  1.66 GHz dual core
  Dell Inspiron 6400
  I hope you can help
  Mike
  PS
  If you need any additional information / files (registry ext files) I can send you the

  Looks like they took some of their contact information. Since you tried a system restore and it does not, another option would be a place in update available here: http://windows.microsoft.com/en-US/windows/help/install-reinstall-uninstall if there is some registry changes that could help. It depends on if they designed the program to overwrite the files again.