Qosmio G20: Question on the status of RAID

Similar Questions

• Qosmio G20 failed during the installation of SP3, now bluescreens on startup!

  Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
  Any suggestions?
  I can't restore to a date prior to the node without danger, he keeps failing?
  Please help me...

  Hello

  Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
  Sorry, but I don't see any other solution.

  A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
  At the end I backed up all my important data and installed new WXP.

• Qosmio G30: A few questions about the performance of RAID-0

  Hi all, this is my first post here, so please be gentle with me.

  I read a lot of posts explaining how to configure striping RAID-0 (and pitfalls) but I've not found anything that describes the performance benefits. It would be great to hear from anyone who has implemented RAID-0, with before and after comparisons of speed.

  The system starts twice?
  Applications load significantly faster?
  Is significantly faster when you save large files? Or is it simply not useful?

  All information of those in the know would be greatly appreciated.

  Thank you, Bob.

  Hello

  I used the Qosmio G20 a few months ago and I used the operating system on the HARD drive with RAID (a visible HARD disk) and without RAID (two visible HDD)
  I didn t notice any speed restrictions and the laptop starts at the same time.

  But I noticed different results please share with us ;)
  Thank you

• Qosmio G20: Question of Media Center Receiver - recovery question

  As the abvoe really, I usually leave my computer running from one day to the next day and yesterday I went on it to find that I had 80 MB hard drive (60 GB HDD) to the left. Error messages had popped up and a record of these was recorded in the folder pchealth, under userdumps, or something like that. Anyway I deleted 58gigs with a value of these userdumps, but the same error message kept popping up.

  It was a mistake with the Media Centre receiver, but I don't quite know what it is, but it was founded in the ehome folder which I think is located in the main folder of Windows.

  I have been into msconfig and stopped the ehhome.exe to start but that seems to ruin the tv/video within the media library settings.

  I recently installed the codec and divx player to play divx movies.

  I was wondering is that it would be more prudent to use the CD recovery and re - install windows and the software and create a restore point, and then install the codecs to see if the same problem arises, or if someone has had this problem and it heals.

  Finally, I actually ran the recovery cd to the above, but when the cd starts the first line on back said something like, 'running Setup for windows 98'. XP is certainly on the 98 and no recovery cd?

  Can someone please confirm this for me and all the answers to the above problems.

  Thank you.

  Hello

  I can t believe that Windows 98 is placed on the recovery CD.
  AFAIK the Qosmio G20 was delivered with the MCE window.
  There is no recovery of Win98 CDs for Qosmio units.

  In my opinion, this message occurs due to RAID or other drivers that load at the beginning.

• Qosmio G20-139: use the laptop screen to play on the Xbox 360

  Hi I have a question about the monitor function with the G20-139,

  I have an xbox 360 and would like to know if there is a way to use laptops screen to play on the 360 in high definition or composite mode using the monitor function. With the laptop came a composite cable at one end and a sort of headphone 3.5 mm at the other.

  I read the manual about the case and it does not work.

  Any help would be appreciated thanks

  Hello

  The port monitor - where you can connect with the composite cable can be used to display video from your digital camcorder, video game or VCR on the internal LCD screen. It can be used as a line-in port to allow the connection of a stereo device for audio input.

  In my opinion, you also need this cable to connect the Xbox to the Qosmio with composite cable plug-in software component.
  http://www.madcatz.com/default.asp?page=257&CategoryImg=Xbox_360_Cables

  Then to commence the Qosmio with the Monitor-in button that starts the Qosmio player.

  Good bye

• Qosmio G20: Recording of the tape recorder to the computer

  My Qusmio G20 manual says features "Port Monitor" as a line in "Port to connect an audio device. However, I have connected my computer cassette player output ports "monitor - at the port" with the proper cables and jack and get no signal/Ribbon playing through the computer speakers.

  Can someone advise me on this is really possible to do and if so, where could I go wrong?

  Thanks in advance.

  Double-click on the 'speaker' icon in the status bar.
  On this new screen, make sure that "Line-In" mute option is not checked.
  Subsequently

  Alcahest

• Qosmio G20: Questions on MCE Recovery CD/DVD

  A few months back, I bought this laptop Qosmio G20. It s cool. I live in Asia where media center edition is not launched with this series. I have a Windows XP home edition with this laptop. Can someone tell me if it is possible for me to format this OS and install MCE on this laptop? And where I could get a recovery cd/dvd edition of Media Center? What is the procedure to install Media Center Edition of restore cd if I get a? And someone wants to share their media center edition cd recovery with me would be great.

  pls contact me on this email address [email protected]

  Thank you very much (:)

  Hello Anand

  AFAIK only devices with tuner TV have installed MCE and you can get the MCE OS recovery CD if you bought it with the Toshiba unit. If your laptop comes with Windows XP Home you can only get this form of recovery CD service partner. However, you can use the original cd of Microsoft Windows MCE. Then you can try to download all of the necessary drivers from the Toshiba site.

  See this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6376&MessageID=22306#22306

  Good bye

• Qosmio G20: constantly from the noise of the left when speaker microphone webcam enabled

  Hello

  Is that what someone has successfully installed the logitech quickcam 5000 on their Qosmio G20? I can only use it with the microphone disabled - enabling it results in constant "noise" of the speaker left (or earphone).
  It would be nice to get this working...

  Thanks in advance,

  Aiden

  Hello

  I found this useful document of Toshiba which describes the very similar problem:
  http://support.toshiba-tro.de/KB0/FAQ6201DW000YR01.htm

  Maybe it helps

• Qosmio G20 - extraction of the error failed THotkey

  Hello

  I have a Toshiba Qosmio G20 at the opening I have a message

  Extraction THotkey failed
  Error code 0 X 00031402, 0x00000002

  I click OK, the window disappears

  I read the topics for this pb
  I ran the antivirus
  I ran Spybot
  I created a shortcut in the menu start THotkey.ex: negative
  I found msconfig that nothing works
  I did 2 restores system to 2 different dates: nothing works
  In addition to what this THotkey?
  Anyone have a solution?
  Thank you

  Hey,.

  THotkey file is the driver for the FN keys on your laptop. I think that it s the Toshiba Hotkey Utility that you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Then check out the page and reinstall Hotkey Utility, it should work. :)

• Qosmio G20 - spot on the screen

  Coffee was spilled on my Qosmio G20 yesterday, my first reaction was to try to keep out of the keyboard and PCB below, but this resulted in a few enter the screen leaving a stain on the left hand side (the region is actually brighter than the rest of the screen).

  Are there instructions anywhere on the disassembly of the screen as I wonder whether to go inside and try to clean this area or just live with it.

  I have no Toshiba dealers anywhere near me and that you do not want to send the laptop away for several weeks.

  Martin

  Hello

  The spilled liquid is still a serious problem.
  But it seems you're a lucky guy and the liquid doesn't damage the motherboard and integrated circuits.

  In any case, I would not recommend opening the laptop itself. Looks like you haven t a lot of experience with these procedures.
  It s always risky to disassemble the laptop. The chances are high that you damage to other parts.

  Finally, you must know that you will lose the warranty if you disassemble the laptop itself.

  Good bye

• Qosmio G20-139 of the United Kingdom - TV tuner does not work in Libya

  Hello

  My name is m, k, sh I live in Libya.
  I bought Qosmio G20-139 until now it works normal but I would not use this pc to look at the possibility of using satellite channels. I get only the small screen in the screen of my pc.

  In the operating manual of the said (tv tuner may not only work in the country of purchase. means to the United Kingdom only)
  My equation, what can do to solve the broblem.

  Can I install any software for example or another TV tuner?
  The tv tuner in this pc, what they said is integrated.

  Thank you very much

  Hello

  I think that the UK tuner will not work in Libya due to different video standards. I m talking about different settings PAL and NTSC.

  In your case, it would be desirable to use an external USB DVB - T tuner (if DVB - T is available in Libya) that supports PAL/NTSC in Libya settings.

  I think you have to look at some stores for local laptop/computer and should ask a few merchants for details.

  Welcome them

• Question about the status of the request

  Hi all
  
  I'm a newbie on OIM 11 g.
  
  I've set up an approval workflow that has two levels of approvals. The two levels of permissions are completed successfully, but the status of the application does not have to "request completed". The State of demand is showing that "Post operation begun treatment.
  
  Ask you please help me solve this problem. Please let me know what needs to be done for the State of the application to be replaced with "Request completed".
  
  Thanks in advance for your help.
  
  Thank you
  PT

  If you need to configure the provisioning of the claim,

  check the automatic backup, auto prepop.
  Cause first to do this, maybe after that requst it is a task that is not completed successfully. So make sure that any post after query process completed.

  -kuldeep

• Qosmio G30 - Question on the Raid driver

  Do I really need this driver to use RAID functions? If its set in BIOS, what makes the pilot actually do? outside you give health statistics?

  See you soon

  Yes, you need the RAID driver.
  I think that the Qosmio G30 has been designed with the RAID feature as some units of the G20.
  Without this RAID driver, you will not be able to install the OS because the OS Setup may not recognize the HARD drive.

  RAID uses two options:
  RAID 0 (Striping): two hard disks are used as a big drive, if a HARD disk fails all data is lost
  RAID-1 (Mirroring): hard drives contain the same data if a disk fails, data is not lost

  I think you could check this announcement and also use the advanced search to forum for more results on RAID.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14349&MessageID=52359

  In the user manual, you will also find lots of info on RAID

• Qosmio G20: Question about networking & monitor in and Xbox

  Just bought a G20 last week and I'm in love. First laptop I've ever owned and its worth every penny.

  A few scarecrows.

  I never received an antenna adapter to connect my in arial, but I'm sure I sohuld of fact. In the quick start manual of what it listed everything that I should received in the pack, and who was listed. Was not enough one - if anyone knows a number to contact Toshiba and get one of these sent to me? Can't seem to find one anywhere.

  Second... I'm going to my brother's computer network. Novice course of network, it does not work that well. I'm not sure whether if we need a router? I just want to connect to his computer and use the internet through that. As you would with a network cable. So he bought himself a wireless network card... but we'll be buggered if we can get it too work. Any advice or a definitive guide... or do we this router after all?

  And thirdly, sorry for the long post, but I'm playing my Xbox by the G20, but I'm having no luck what so ever. I plugged the monitor using the three composite cards (white, yellow and red) but nothing that passes through. The only way I've seen a photo is when you set up a decoder and it happens in a small box when its analyses for channels... but I can't select to see and it seems s delay 1 second.

  Sorry for the post long-term... just try to make it all sorted.

  Thanks in advance for any help.

  Hello

  You are right that the Qosmio is a very nice unit.
  But I'm not sure about the antenna adapter. I found the information in the user manual that the antenna adapter is optional. In this case the adapter will not always come with the laptop, but you can ask that the Toshiba service partner.

  Well well, on the network connection: If you want to connect two computer, you need a crossover network cable if you don t use the router. In addition, two laptop computers must be in the same workgroup. In addition, you must manually set the IP address, the default gateway and the subnet mask in the internet protocol TCP/IP properties.

  On the Xbox:
  If you want to know more on the connection of MCE and Xbox, see this Microsoft Web site.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Check also questions other messages of the forum on the Xbox:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794#33794

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9756&MessageID=34462#34462

  Good luck

• Qosmio F60 - Question about the extended warranty

  I just purchased a Qosmio F-60 (I am based in the Kenya) and after registration the laptop - my "registration form", says:

  Free warranty updated: SE5003E-B
  EMEA from 1 to 3 years warranty extension

  I checked on the "Details of the unit" section web site (www.toshiba-tro.de/unit-details) and it says that it is "extended warranty" "1 to 3 years. I just wanted to confirm that the laptop has now guaranteed for 3 years and what level of guarantee? Every bit of equipment?

  Thank you.

  Hi mate

  Firstly that there is a user forum and I doubt that anyone here in the forum could confirm your warranty status.
  But anything you need you can find on the page mentioned; unitdetails.
  Here you can see the details of the warranty, and when it was recorded.

  But if you have doubts, you can also check this page:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/services_warranty_reg_map_eu/