Qosmio G20 screen is comatible with display Qosmio G10?

Similar Questions

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• Qosmio F10-121, while the splash screen gets scratched with big purple bands

  Hello!

  Suddenly, I had a problem with my Qosmio. Maybe someone could help me.
  When I turn on my computer, the Qosmio logo appears (its ok) and then the Windows logo. But that's the problem, my screen becomes striped with big purple bands. I can't do anything, it's completely unreadable... Windows cannot be loaded, the Qosmio PIF and restart.

  When I plug in an external display, it's the same thing.
  I tried to use the restore DVD, but for the moment, it doesn't change anything.
  I see 2 problems:
  -A video card problem (but Qosmio logo appears, and the restore DVD menus are normal
  -A big failure of HARD drive (when I plug the SD of the internal Qosmio on my other computer, it is very, very slow, and suddenly, HDD disappears)
  So, if you have any advice...

  Thanks a lot for your answers and do not look at the faults.
  Eric

  I bought my laptop 5 years ago and after a week, the motherboard has been replaced. But since then, it works like a dream. Never had any problems.
  As you can see that computers are devices of high technologies and every time something might be broken.
  I think that the laptop should be checked by a technician with experience for laptop

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?

• Failure to display on Qosmio G10

  Hello

  I use a Qosmio G10 for 4 years now. I just got a new motherboard installed 2 months. This morning the display begins to act weird.
  When starting the laptop, windows, start symbol appears almost normal colors, but when the windows desktop is running for 2-3 seconds, the picture becomes bright. The text of the desktop icons is not sharp, and half lower of the screen there is a fine glitter mesh. Although the colors are abnormal on the entire screen: (to be determined with paint)
  -Black is black and white is always white
  -light gray (hue 120, saturation 0, RGB brightness each 192 181) seems normal but dark gray (hue 120, saturation 0, 120, RGB brightness every 128) is represented white.
  -brown (0, 240, 60 128 red brightness saturation hue) and the red light (0, 240, 120 red 255 brightness saturation hue) are represented as the same light red.
  -too dark and clear (yellow, green, turquoise, blue and magenta) are represented as the same color on the screen.
  I look at the picture you see immediately that the colors are not properly represented.
  When the screen is off, and then it shows colors initially normal, but then (after 2-3 seconds) everything becomes brighter and the colors become indistinguishable as described.

  If a 2nd screen is used each colors appear normal.
  I tried the new display driver: no improvement.

  Please give me a diagnosis which component is defect. Do I need a new display or is the new mainbord fault (guarantee).

  > If a 2nd screen is used each colors appear normal.
  According to your description it takes the laptop display problem.
  On the internet you can find many free tools for the control of the display. Try to test with these tools.

• Qosmio G10 white screen at startup

  I have an old Qosmio G10 I bought from a dealer in Beijing about 2 years ago.

  After about a year of use at home, I discovered that the screen would turn sometimes white when the screen was moved or shake.
  Some days it works perfectly well, it wouldn't even start without going white.

  Towards the end the screen would show only a picture when the screen was put in a certain angle.
  Now, the screen will just white the second I turn it on.
  I look at a material problem here or there have been known to have software problems with some of the similar laptops?

  Thank you

  T

  Hey Buddy,

  Looks like that the display cable may be loose. I point to a hardware problem, but before you send your machine to an authorized service partner, go to a technician from the local computer and him to check the cables on the screen.

  If realignment of cables does not help while your display is faulty and should be replaced by an authorized partner. I Don t know how long your warranty is, but if you want even when to send your machine to a service partner, you should visit the following link to find the one closest to your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Qosmio G10-105: the screen is black

  I was asked to look at a Qosmio G10-105 by a friend who claims that it functioned very well until one day "the screen went black.

  It seems to start fine but there is absolutely no image on the screen with backlight, no and no image "Dim". The problem is that when I plug in an external display there is also no image at all however becomes the external display backlit, but that's all.

  Can I assume that this is neither the inverter, backlight screen or I get no image on an external display?

  Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?

  I tried 2 external displays

  Any help / ideas would be appreciated...

  Thank you
  Rob

  > Is it likely to be the graphics card? If so, is it replaceable or it is part of the motherboard?
  Hmm. It really looks like a graphics card problem
  It was a good idea to connect the external monitor to check if the same problem would appear on the second screen that there is a simpler way to find out if this problem could be linked to the TFT screen or the graphics card.

  The GPU chip set on the motherboard and in most cases (in your case too) the whole motherboard must be replaced :(

  Unfortunately, but it looks like an expensive affair :(

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• Qosmio G10-100 - failed afer replacement with larger HARD drive HARD drive

  Following a failure in a Qosmio G10-100 HARD drive, I replaced the HD 80 GB IDE current with a 160 GB IDE drive. After execution of the recovery of the DVD, new HARD drive has been formatted and installed the software (later proved by removing the drive and treat as an exterrnal disk on another PC).

  However, on booting, the machine has recognized that it was another hard drive and it wouldn't let me go beyond the screen that offers alternatives (Safe Mode, etc.), nor what would allow me access.

  Counsel gratefully received

  > After running the recovery DVD, new HARD drive has been formatted and installed the software (later proved by removing the drive and treat as an exterrnal disk on another PC).

  Sorry mate but I put t understand what you did exactly
  You have installed the Windows operating system on the new HARD drive by using the recovery disk. Right?
  Well, the recovery procedure has completed correctly? The operating system has been successfully installed?

  Did repeat the installation of the OS?
  If this is not the case, repeat!

• Purple stripes on screen Qosmio G10 106

  Hello
  All of a sudden my Qosmio G10 - 106 has started to show me purple stripes when I turn it on, it me does not start then I reinstalled Windows on the 2nd partition. This allowed me to start then, but the lines persist. Anyone had same problem and if so, please advise me a solution that I am not covered by the guarantee as it exprired last October.
  See you soon

  Hello

  I recommend you test with the external monitor. If the external monitor doesn't show the same there is a problem with the display and you must contact the partner of service authorized in your country.

• Is it possible to reactivate Qosmio G10 mode standby with Skype call?

  I would like to know if it is possible (and how) to use my Qosmio G10 as a phone with videoconferencing as easy as with a normal phone, I mean how to leave the laptop to low-power mode and let Skype awake it automatically and directly ring when you receive a call.

  I use it without problem when the laptop is not in a sleep mode, but if someone calls when the laptop is in low-power mode, so it does not ring. of course, I don't want to leave a fashion of maximum energy all the time...

  Anyone know a solution? I guess it happens this way because in mode low energy, wi - fi seems to order, because when my computer wakes, then it displays a message saying that 'now he is connected.

  Thanks for any help

  Hi Bea

  Your idea is very interesting but unfortunately I don't think it's possible.
  Activation of the sleep or Hibernate mode is not possible with Skype or other IP phone application because this function must be supported by the BIOS.

  But the BIOS doesn't support something like that

• Qosmio G10 134: the screen freezes after repair

  Hello

  Earlier my Qosmio G10 had to be repaired because of the vertical-bars-in-screen-and-broke-down-videocard-problem. They gave me a new motherboard and Nvidia Go 6600 and the problem was solved. I hoped... Because then I couldn't not to use the graphics card for more than 5 minutes.

  When I start playing a game, or so it takes 5, maybe 10 minutes in mind for my screen to freeze. Then precious is unresponsive to anything, even to the Microsoft-Magic-Combination-Ctrl-Alt-Del. very annoying to say the least... Does this sound familiar to anyone?

  Thanks in advance,

  Dave
  The Netherlands

  Hello

  I agree with the agramer. It is possible to s that you got different but better graphics card. On this page, I read that some users who repaired the laptop got a different card because the original of the delivered graphics card was off live.

  In this case, you should check your device for details of the map Manager and if necessary, you must install the right graphics card driver.

• Problems of sudden wireless connectivity with Qosmio G10

  I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

  Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

  Initially, the problem could be solved by restarting the computer and the router.

  Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

  Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

  I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

  I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

  Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

  Can someone please help?

  Why use the CnfigFree tool to connect to the WLan?
  According to your message, you are using the Intel card.
  I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

  > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
  I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

  However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye

• Qosmio G10 lines on screen

  A week ago the screen began to play up

  At first there were the lines on the screen and then ghost images on all the objects on the screen

  After restarting several times the lines began to appear at startup from the bios, screen and they are still there now!

  I reformatted the HARD anf reloaded windows disc but when I try to install the windows blue screen of death has display driver and I can't see the error msg

  I tried two Toshiba drivers and updated nvidia drivers - both will not install

  I ran PC diag test and the display fails this test

  Any help would be great!

  Hello

  Have you tried to plug the external monitor?
  If the lines appear on the external monitor, so I guess there must be something wrong on the motherboard or with the graphics card.
  If the lines appear on the external monitor not so maybe only a faulty display.
  I don't think you can solve this problem without any help. In my opinion, you should contact the Toshiba ASP in your country.
  Explain your display problem and I don't know the guys are going to solve this problem.