Qosmio G20, Toshiba Power saver error

When I turn the Qosmio G20, I have a message "Toshiba Power Saver, fatal error has occurred, this program will end. Code 0 x 2»
I click on the 'ok' button and can use the computer, but after using for a while (about 1 hour for example), it becomes very slow. I check the Task Manager and find that "ccSvcHst.exe" takes up 99-100% of CPU usage. I have to turn power off, then again to use another 1 or 2 hours before slowing down again.
Help, please.

Have you tried to delete Toshiba saving energy of the system and see if the laptop will slow down again?

Have you tried to reinstall Toshiba power saver?

Tags: Toshiba

Similar Questions

  • Satellite C660 & Win XP Toshiba Power saver error 0x2

    Ive just install xp
    Once completed the installation of GST, GST gives me this error
    and will not work

    any help will be so appreciated

    Can you please post model mobile exact? I just want to check if your laptop is fully supported for Windows XP Home edition.
    In any case, before starting to install any specific tool of Toshiba or utility, you must install the common modules first.

    Please test.

    According to my experience, it is not easy to fix now, so it is also possible that you have to reinstall Windows XP Home edition and install all the drivers, tools and utilities in the correct installation order.

  • Tecra A - Toshiba Power Saver error after loading the OS

    I have two problems with my XP Pro SP3 operating system

    (1) immediately after loading the OS, I got this error message


    (2) and my job doesn'r to reboot. Stüch Windows HE is shoting down, and I have to manually to swith out of turn.

    How to solve this problem?

    I don't know much about your model, but I think you should update a powerhouse of Eve:

    [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  • TOSHIBA Power Saver for Qosmio F50?

    I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

    What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

    The series F50 there as well? If Yes, where can I find it?


    As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

    TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

    I've created an interesting article here in the forum for you:

    Good bye

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094


    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.


    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • TOSHIBA Power Saver - fatal error OX50


    Recently, I have a big problem, my Toshiba power saver.
    It triggers a fatal error OX50 and I tried reinstalling several times and it doesn't work.
    Please how can help me solve this problem?


    Fatal error with Power Saver hmm I read a few threads on similar problems and it does seem that the completely OS restore Toshiba recovery CD could help settle the energy saver

    But may I ask if you install all the drivers in the correct order?
    Usually the installation instructions are always placed on the page of the Toshiba driver and it s necessary to follow this guideline.

  • Re: Satellite L300 - 17l - Toshiba Power Saver gives me error after installation

    When I bought my L300 - 17l all the drivers of Toshiba drivers download pafe worked out well.
    Recently, I have reinstalled my OS XP and now I started to install all the drivers again. LAN has been authorized, WLAN was ok, the display driver has been authorized.

    But when I get to install Toshiba Power Saver (URL: [http://support1.toshiba-tro.de/tedd-files2/0/pwrsav-en-20080519172104.zip]) it gives me this error (it shows the error or after I cliquerai on finish the instalation or before installation began, as you can see in this screenshot)-[http://www.picvalley.net/v.php?p=u/2381/9078672171740560287.JPG]

    I later tried this - i go ot Control Panel and open Toshiba Power Saver, but then it gives me another error: "CANNOT be opened because you do not have access rights to use 'TOSHIBA Power Saver'.
    I reinstalled my XP again and it still gives me this error... I wonder what could be the problem... Please help me


    Satellite L300 - 17L belongs to the PSLBCE series.
    I chose this model number and found exactly the same energy saving that you tried to install.
    So I guess that you have chosen the right Power Saver utility for this model of laptop.

    But did you also install the common Module?
    This software must be installed first before installing other tools.
    Update you the Win XP for the State?

    Check it!

  • Re: Toshiba Power Saver fatal error. Code 0 x 0

    Hi all

    I recently received this new notebook Tecra M10 (model PTMB0A - 00M 001) replace my laptop to existing business. It came loaded with Windows XP and built by the standard portable computer generation.

    It works fine except that at startup I get the error message "a fatal error has occurred. The program will end. "Code: 0x0.

    I did some research and I think that the original version may have been compromised, because there aren't has no files in the directory C:\Program Toshiba Saver except for a TPSTrace.log that has this message inside: "a fatal error has occurred. The program will end. "Code: 0x0 rental: TPwrSave.cpp (140). The Power Saver software claims to be v7.11.00.

    I downloaded the latest version 7.11.10 (for XP) and when you try to install, the software asks you if it can uninstall the existing version and as it tries, the fatal error code: 0 x 0 occurs which always uninstall, and I suppose that reinstall it. It seems a pity to restore from CD lose all data and other software that is very good because of this software pooey to save energy. Given the original installation was probably standard, there is no guarantee that even if I do a system restore on CD the same problem not re - manifests.

    Is there a way I can do XP think software is deleted (it seems to be absent physically, but XP think it is present) by forcing an uninstall. I can then try to reinstall it to see if I can do better than what it was when it was delivered to me. Otherwise, I'd be more than happy to just work without it, for the trouble it causes.

    Thanks in advance.


    You must delete it from the registry.

    Try CCleaner first, it may be able to remove the bad registry for you keys. (google for "CCleaner")

    Otherwise, run Regedit, and then search for "to sleep". Make sure that you delete, in order to ensure the results refer to Toshiba Power Saver.

    PS. back up the registry first. You can do this by creating a Restore Point in Windows. (Panel of-> system)

  • Meassage error (Toshiba Power Saver)

    When the computer starts it is meassage (toshiba power save) a fatal error has accurred this program will be terminted code 0 x 0
    What is the proplem please?


    It will be very interesting to know what type of laptop do you and which version of Power Saver is running on the device.

    Good bye

  • Error of Toshiba power saver - A60

    When I install the Toshiba power saver on my laptop A60 with WinXPpro SP2, it
    Displays the following error:

    A fatal error has occurred. The program will end. Code: 0x7E
    Also at the opening of the power saver option in the control
    Panel to get the message: could not open energy like u
    am not prepared the administrative rights to open it.


    Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=9573&messageID=33773#33773

  • Order of error has been committed by satellite P500 - service TOSHIBA Power Saver


    OS:-Windows7 Ultimate (32 bit)

    On start up to get a service stopped notification - "service TOSHIBA Power Saver was arrested, so cannot be changed".
    That is the only other cause the change of Windows 7 known behavior where the Eco Power Saver button is no longer works but the Control Panel/Power Options standard I can select and edit power plans as usual. So it is just an annoying pop up on start up.

    Tips to prevent the annoying notification welcome.

    BR /.

    Hi Rob,

    Have you tried to reinstall Toshiba Value added Package? It contains current saver where you get this error message. You can download it here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I also recommend reinstall the Eco utility.

    Good luck! :)

  • Code Toshiba Power Saver Fatal Error 0x51A Tecra M9

    I just bought 5 Tecra M9 and I have the same problem with them whenever I start the laptop:

    "TOSHIBA Power Saver.
    A fatal error has occurred. This program will be terminated code 0x51A'

    And sometimes:
    "TPSMain.exe Application error".
    The application failed to initialize properly (0 x 0000043). Click OK to close the application '

    If I try to open Toshiba Power Saver utility from the control panel it return me to select power mode Toshiba in the list of management of power supply in Power Options, but there is not any diagram power Toshiba on the list.

    Any suggestions?

    Thank you.


    Have you tried to reinstall the Toshiba power saver utility?
    Please do it!

    I had a similar problem of Eve on my laptop satellite.
    I finally solved this problem by reinstalling the energy saving and the utility of Modules common Toshiba.
    The common modules are required to run other programs from Toshiba as for example energy saving.

    Just another clue; especially this program error appears because of a corrupted registry.
    You can use the freeware like CCleaner to clean the registry entries.

    Best regards

  • Receive the error message when you try to install Toshiba Power Saver

    Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.

    For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.


    where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
    When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).

    Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
    Please, more details on your problem. :)

    Welcome them

  • Toshiba power saver is unbootable

    (Satellite M40x)

    Hi all

    I need help, such as every time that I am pressing energy saver Toshiba told me that I have to open windows power options and use the Toshiba power saver, but I can find it there in the diagrams. I have chenged the parameters once accidentally a normal windows and settings for the Toshiba power saver no longer works.

    I tried to re - install (download formtoshiba site), but now I get an error when starting...

    Please help because I lack the characteristics


    You must go to the window power options and change the POWER SCHEMES drop-down back to ECONOMY of ENERGY TOSHIBA. Except if it is positioned like this energy saving windows will always be the default.

  • Portege R500: Impossible to install XP in Toshiba Power saver


    I have a protégé R500 PPR50E which had Vista on it, but now has XP on it.

    I installed all drivers etc for the laptop and everything works fine except that I can't get the toshiba power manager to install.
    Whenever it installs programs it shows as 0.00 mb and installation when you click to open the control panel in the Add box, or move the section it says "a fatal error has occurred. This program will be terminated - code 0 x 0 - and then if I try to uninstall it to try a reinstall it says: "1628 - could not complete the installation.

    Any ideas anyone?
    I downloaded the correct driver of course - I tried a redownload and it made no difference.

    Also - I may pluching at straws but in the Bios before I made the construction - I turn the controller as opposed to ACHI ACHI compability mode - don't know if it could have an impact on it? -If I turn that on XP blue screens because I never installed the driver in the windows install (f6 prompt)


    I believe that you are unable to install the Toshiba power saver.

    We should focus on this error message:
    * 1628 - cannot complete installation *.

    Usually, this message may appear when installing any software that uses the InstallShield Setup program. According to InstallShield, this is a general error message indicating that the application has not been installed successfully.

    Solution check this:

    Best regards

Maybe you are looking for

  • Cannot delete a Contact in Mail 6.6

    6.6 mail I can't remove a contact, even if it is not in my app. When I try to enter the e-mail address of the contact while composing the email, I get the correct email address and the email address of the, in this case, which I think is a Malware em

  • 5s iPhone battery

    I got my iphone 5S for about a year, I have never had a problem with the battery - full charge used to last me 12 hours, even without the low-power mode. Last week, that my battery was seriously spoil, even whenever my phone is locked my % battery wi

  • Crash of Skype 7.0 problems

    OK, so I have a new computer and it works in windows 8. That it comes with a worked for a while but then he said now his signature, but then, says there is an error and I restart and uninstall and reinstall and everything, but it will still not conne

  • Generator doesn't include no audio

    Created a short Motion project which included an audio track. Save as template and registered as a generator. And, it is displayed as expected in FCP generators When I add it to a project, it does not appear that audio has made the transition to FCP

  • Scan from String - Remove comma

    Hello LabVIEW community.  Here's an easy one that made me a bit puzzled.  Then of course, it's not easy for me.  I am using string analysis for city, State, Zip from a string.  I can build the string that I have just described by commas using the For