Qosmio G20 with TV (s-video cable) - the screen is black and with
Hallo and another question by me... when I connect with the TV using the s-video cable still the TV screen is black and white, I checked this on two different TV, is always the same, and even when I am felt for the settings of the card and when I'm changing color options nothing happen Thanks for your help
Hi again
As far as I know if you connect your device to the TV, check the settings for S-video on the TV.
By the way:
All new TVs from 70 cm to the top screen diagonal must effectively control S-Video connection on SCART. However, this should be enabled in some cases. If the image does not appear in the color anyway, your TV doesn't support certainly S-video. In this case there are adapters that allows S-Video Composite video (RCA cable). You can find it in all the electronic stores.
Good bye
Tags: Toshiba
Similar Questions
-
When I connect the HDMI cable to my laptop, the screen goes black and I can't lift the office unless I get out the HDMI cable. It happened all of a sudden I used he linked TV to catch-up on TV episodes until last night when it happened out of the blue!
Can someone please help with this.Contact the manufacturer of your laptop. Also - that there might be a key combination for your laptop that changes the screen from the main output is - look at your documentation or on your keyboard for such a combination of keys (what kind of computer is? Make & model...)
-
have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?
have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?
===============================
I don't know what is causing this problem but would be
suspicious, it is related to a corrupted or obsolete
video driver.Might be interesting to try to reduce your graphics
Hardware acceleration instructions
in the following article.How to put in back of graphics hardware acceleration
http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
(scroll down to: "If you are using Windows 2000 or XP")If they improve the question, you should look for the
site Web of MFG. your video card
a updated driver Win XP compatible video. Or...
If your computer is a laptop... Search support
site of the manufacturer of your computer.If you do not know the make and model of your
Video adapter, see the documentation that
supplied with the computer.Also you can find info on your video by driver
go to Device Manager: you can launch
By clicking Device Manager on... Start/run and
type or copy / paste:
devmgmt.msc
And then press ENTER.Expand "Graphics cards" and right click
the name of your graphics... then
choose... Properties / tab pilot... FYI.You should find the make and model of your
adapter display as well as the version of the driver.If the driver on the Web site is no longer
current than you run...
Download and install it. In addition, installation
instructions that should be followed closely
should be available on the support site.Once installed the new video driver... you
can restore your full acceleration.Good luck...
-
I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it. When I click on the icon and open to the top it says cannot load xp.com and a flag of resolution comes up saying it can't run a resolution less than 1930 x 2300. I have no idea what this means and how I can solve this problem. I thought that maybe the application was bad, so I deleted and then added it back on and it does the same thing. I even did a restore of the system to try hard but nothing I did the work. So, how can I solve this problem. I'm not a computer genius, so he must be explained in simple easy to understand instructions.
Hello
I suggest that you view in Mozilla Firefox community because there seems to be a Firefox problem.
https://support.Mozilla.org/en-us/
Some examples of the problem:
«I can't open Firefox, it says could not load xpcom.» Who is wrong? »
https://support.Mozilla.org/en-us/questions/965228
"I get an error"Unable to load XPCOM". I know that I can reinstall Firefox, but how do I save my favorites?
https://support.Mozilla.org/en-us/questions/1029239
'Error message cannot open the XPCOM and impossible to open ALL pages '.
https://support.Mozilla.org/en-us/questions/1006494
Here is a YouTube video on fixing this error:
https://www.YouTube.com/watch?v=x_C2eaNj234
See you soon.
-
After the loading of barbie, equestrian club, his game is ok but the screen is black and doesn't let me do anything
Hello
1. what operating system is installed on your computer?
2. is it works much earlier?
3. don't you make changes before the problem?Check if the game is compatible with Windows 7 Compatibility Web site. The game mentioned above is not listed in the compatibility Web site, it may or may not be compatible with Windows 7.
I suggest that you follow these steps and check if the problem persists.
Step 1:
Update of your display drivers and check if the problem persists.
Step 2:
Reduce hardware acceleration and check.a. click the Start button, Control Panel.b. now, select appearance and personalization. under display, select adjust screen resolution.c. now, select adjust the resolution.d. click Advanced settings.e. now, click the Troubleshooting tab, and select the change settings button.f. in the Security dialog box, click on continue.g. move the hardware acceleration slider to the third notch.h. click OK.i. restart Windows.Step 3:
If the game worked fine in the earlier version of the operating system, I suggest you run the game in compatibility mode.
-
original title: HELP ME PLEASE!
(I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.
Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,
Take a look at this:
http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html
Hope this helps
Post back if necessary
__________________________________________________________
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How can I save by iPad 3 when the screen is black and nothing appears?
How can I save my iPad in ITunes or iCloud 3 when the screen is black and nothing appears?
Is the empty screen, because just the screen is broken, or is the iPad just dead? Have you tried a soft-reset/reboot it?
At least you can see what you touch on the screen of the iPad, you cannot force a backup to iCloud.
If the iPad still works and is connected to wifi, a backup should automatically happen (if iCloud backups are enabled) if it is connected and the locked screen.
-
Whenever I try to play True Crime New york city for windows XP it is closes its doors after the theatrics start and gives me an error saying the file d3d9.dll has stopped working or the screen goes black and then then I know you left the game back and I'm at my desk again.
Hello Respect137, welcome.
It would appear that running DirectX files installed on your system were corrupt. This gives a test:2 follow the instructions which is there to install the package to update DirectX3. Once installed, restart your computer and try to run the gameLet us know if this helps,Thank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: Auto Adjust
Hello.
Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.
I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.
Any help would be appreciated... Thank you
Try this:
Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
Then:
http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution
Change the screen resolution
Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.
See you soon.
Mick Murphy - Microsoft partner
-
When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds. Then the screen goes black instead of blue and stays black for about 10 seconds. A 'Power SAVE MODE' appears. The machine is dead to all orders. I have to stop by pressing the off button. I can turn back and the F10 key to get in Mode safe mode with networking.
I tried to reinstall Windows XP original but it would erase my files. I tried to restore the last good configuration also knowledge. That did not work.
The change came after a Windsows update. I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start. Clues? I use Negear. No change when I hooked directly either.
Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do. What does not load Windows?
http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black
-
Satellite L10-192: Video Out (TV screen is black and white)
Hello
I recently bought a new notebook Satellite L10-192, and I have trouble with the video out of service.
The image on the TV screen is black and white. I have read and followed the instructions of the manual (indicate the video mode PAL B, etc.), but it is always black and white.
I have Win XP Pro without Service Pack.
Anyone has any advice on this problem? Can I change the resolution or color depth or install Service Packs? Or a Toshiba from the factory CD utility?
Thanks in advance,
Zoltan
Hello
In my opinion, your settings on the laptop are right but please check your TV also. I put t know if your TV is a S-video port or you use a S-video adapter. Please check menu TV. Maybe it's for S-video option in the port.
If the TV doesn't have a S-video port, you can connect your unit as follows:
(1) SVID-adapter that brings back the color! It works with any device with an s-video signal through a plug 4-pin or 7-pin. http://www.s-vid.de/images/SVID.gif
(2) SCART - / adapter S-video http://www.mediaatlantic.com/product.php/366/1142//8aa0b1bbaf6020c785221873b2a985bdGood bye
-
the screen is black and all the lights are on do - what I do?
When I turn it on all the lights turn on but the screen is black
Hello
Before you attempt this procedure, the judgment of the laptop, remove the AC adapter and then hold the power button for 20 seconds to dispel any residual charge in the motherboard - do this whenever you stop before changing/deleting modules.
Try to remove one of the memory modules and see if the computer will start. If it is not, move the same module to another location and try again. If it still does not start, remove the memory module and repeat with the other to see if any combination will allow the laptop to start.
A video and a description of how to remove the memory modules is on the link below.
http://support.HP.com/us-en/document/c01272264
Kind regards
DP - K
-
Cannot install Firefox Mobile o my Motorola XOOM. I have download and start editing the page and the page become black and back can not be configured.
By clicking on the "Android Zoom" and select "Stretch to fill screen" and restart the tablet. The "Zoom to fill the screen" breaks Firefox mobile and it's a shame Android this suggests for our application on the first run.
We are working to solve this with the creation of our Tablet UI.
-
at idle, the screen go black and says cospla 1scr does not work
When the computer is idle for long periods of time, the screen turns black with notice cospla-1SCR microsoft looking for correction does not. This happened for several months now.
What program is it and can I remove it does not, and microsoft has no answers to fix it.
I think the message is Lightn ~ 1.SCR. That would be a problem with the screen saver you have.
Go to control panel of configuration, appearance and personalization or customization in Classic view, and then click Change screen saver and choose something else.
-
Problem with the screen goes black and then completely black
While watching a movie saved/tv show with Windows Media Player/VLC or any other media software, when a night scene or any situation where there is an important subject of black screen, my screen becomes progressively more dark, until it becomes completely black and then, after a brief moment begins to clear up, but is still much darker than it should be. Am I engaged a setting in my graphics card which is the cause?
Operating system system model
Windows 7 Edition Home Premium (build 7600)
Install language: English (United States)
Local system: English (United States) Compaq-Presario, NC696AA-ABA SR5710Y
System serial number: MXX91902Q1
Case type: Desktop
Processor and b main circuit
2.30 GHz AMD Athlon Dual Core
64-bit ready
Multi-core (2 total)
Not hyper-threaded Board: ECS Iris8 1.0
The bus clock: 201 MHz
BIOS: Phoenix Technologies, LTD V5.36 11/19/2008Display
NVIDIA nForce Serial ATA Controller
Standard dual channel PCI IDE controller NVIDIA GeForce 9400 GT [graphics card]
ViewSonic VT2430-M [Monitor] (24.0 "screws, s/n R4S101790118, April 2010)Does not need to update the Nvidia driver because it is up to date and could not update the Viewsonic that Windows only recognizes as "PnP monitor" generic monitor, even if it is described as Viewsonic in the Nvidia Control Panel. Did restore the default values in the video section of the Nvidia Control Panel, and that seems to have solved the problem.
Thanks a lot for your help!
Install these updates of 2 drivers and then restart the pc and try again see if the problem occurs.
Another thing that I recommend is trying to reset your settings to default monitor by pressing the MENU button and finding the option defauult of zero/factory reset.
You can also restore the default settings in the Nvidia Control Panel by clicking on restore by default in most sections.
Maybe you are looking for
-
How to remove a toolbar that was added when I downloaded a program?
I use Firefox 7.0.1 and Microsoft Windows XP Professional version 2002 Service Pack 3. I would like to delete (to get rid of the NOT hide only) a toolbar that Firefox has been downloaded when I downloaded a program to print internet coupons. The tool
-
How can I identify the date when the last system restore was used to roll back the pc?
Original title: how System Restore last used As the title suggests, how can I identify the date when the last system restore was used to roll back the pc? I can remove all restore points. I've used twice now the beta off Defender & he assures methe p
-
HP laptop - 15-r132wm (ENERG: new laptop turn off - overheat)
Hello There are two weeks since I bought a new HP laptop, and today it turned randomly off the coast. According to the event viewer on the laptop, it has been overheated. However, how can I directly contact Hp for a repair or a return, because it is
-
Nexus 1000v - Question about VSM and VEM compatibility update
I am unable to find Cisco documentation on the backward compatibility of the MEC when you perform an upgrade of the VSM. I'm looking to improve the VSM of 4.2 (1) SV2(2.1a) to 5.2 (1) SV3 (1.15). Hosts must be upgraded simultaneously, or they will co
-
Add windows xp homegroup to share files with windows 8
I have a xp computer wanted to know if I could put this computer xp to homegroup, so I could share some files with my window 8 computer help and thanks in advance