Qosmio G30 - 102 error display

Hello

In the space of one morning my LCD screen went from showing slight quirks to unusable as follows: Notebook details on foot.

-Green mottled on Windows XP desktop background
-restarted Windows XP OK todesktop, entire screen begins to blink on/off every few seconds, Win XP MCE booted up OK well
-distortion of the images on the screen
-now just blocks of color colours: white, green, cyan, flashing text etc.

This is visible in the BIOS from Setup menu. Secure boot does not end

Tried to output for external monitor, but not on a signal so not lock external of image at all.

Enjoyed any insght on the problem. Not sure if chip screen or video. Is either a setting value when approximately 2.5 years.

The BIOS is the original version 1.60 ACPI cannot see enough screen to try an update.

I tried reinstalling all components - hard drives, RAM, took out battery ran on sector etc.

concerning
David (in the United Kingdom, UK purchase a Qosmio)

Qosmio G30-102
PQG32E-01600VEN
Series X66249xxxG
Windows XP MCE

Looks like the GPU has a problem.

I would like to send the laptop to an ASP (authorized Service Provider) for repair. There is a list of the ASP on the Toshiba site.

Tags: Toshiba

Similar Questions

  • Qosmio G30-102 - can I install RAM DDR2 - 667 Kingston rather RAM DDR2-533?

    Hello

    I have a Qosmio G30 102 and I wanted to spend my RAM to a total of 4 GB (currently I have 2 GB installed with specifications of a PC2 - 4300 DDR2 (533 MHz)). So I searched for RAM, and I wanted to know it would be possible for me to install.

    * Kingston Technology - memory 2 GB PC2 5300 667 MHz 200pin SODIMM DDR2 *. Would it work properly and if so it would be better than doing a (* 1 GB) memory PC2 - 4300 DDR2 (533 MHz) * the standard RAM installed on my Qosmio?

    Thanks in advance for the answers of th

    MB

    Hello!

    To upgrade RAM on my laptop, I used Kingston DDR2-667, and it works without any problems! :)

    Thus, you can use this module Kingston too but I guess that it runs only on due speed 533 MHz FSB of the processor limitation. You can check with a tool of information material such as Everest or PC Wizard 2008 for example the speed of the FSB.

    As far as I know, the laptop can be upgraded to 4 GB maximum RAM.

    Good bye

  • Can Qosmio G30-102 - I use it as a HD for my PS3 screen?

    Hello

    I have a Qosmio G30-102 and I wanted to know it would be possible to connect my Playstation 3 via * HDMI *? For the moment I can use only cables AV that's really fustrating. If I can use the laptop as screen for my PS3, using the HDMI cable inform me please how to do that because I tried all methods I can think.

    Thank you

    MB

    Hello!

    Sorry, buddy, but this is not possible.
    You can use t as the screen of the laptop as a monitor. The laptop doesn't have a video input port, there is only for video output ports. This is the reason for this.

    So if you want a HD screen for your PS3, you will have to buy a monitor only. The laptop can be used for this.

    Good bye

  • Qosmio G30 - 102 screen completely disappeared

    I read a lot of messages about the green lines, white spot, and blue screens. However my laptop screen has taken a step beyond that and stopped working!

    I have a Qosmio G30 102. I was playing a game (use high amounts of graphics) when suddenly the screen went. I restarted the computer, but it came with the different colors of the Rainbow (green lines, would change to a completely white screen). The problem was once windows starts to load than the screen turns off. I used the function keys to review the settings of the screen (if you want it to be double screen, connected to the LCD tv), but nothing would work.

    I decided to restart the laptop, but it now came with windows not stopped correctly and gave me the options to start the computer and had pixels all messed up (some letters were missing), windows, put in place would not work after the reboot because the screen turns off.

    So now, the laptop is just left with a blank screen. I can't install windows and my warranty is now sold out (ironically just 1 month ago: S)

    Any help would be appreciated!

    Thank you

    I found these Toshiba update document produced on the Europe of Toshiba page:

    http://EU.computers.Toshiba-Europe.com-> download-> Product Updates & support

    _ + Update: update the BIOS Toshiba Qosmio G30 and the GPU + _ repair program
    + This question is strictly limited to the Toshiba laptop computer model which was produced during the period from January 2006 through June 2007. Except as noted below, any other Toshiba laptops are affected. +
    More details on how to deal with this issue, you will find

    Welcome them

  • Qosmio G30-102: why is put in Picture not installed Utility value?

    Hi-

    I recently purchased a Qosmio G30-102 with nVIDIA GeForce Go 7600. In Chapter 6 of the manual, it refers to the utility of photo as part of the QosmioEngine installation development. Appears not to be entered preinstalled on your laptop. How can I get this program and why is it not already there?

    Thank you

    Mark

    Are you sure that this app is missing on you laptop to 100%?
    I ask because usually the image Enhancement Utility V3.8.0.0 TOSHIBA must be installed

    The QosmioEngine is active when you use the Qosmio Player TV or the DVD player Qosmio. In addition, the image of Toshiba Enhancement Utility is available on models nVidia Go7300.
    If you have the nVidia Go7300 graphics card you might check the windows, tabs in the nVidia desktop Manager Applications

  • Qosmio G30-102 Optical SPDIF not working not

    I bought the new Qosmio G30-102 and I'm sure that the connector SPDIF optical Out does not work.

    I can't test it now, but I had a couple of SPDIF sound cards and each of them had a red light on all the time, who reported that Optical SPDIF is supported.

    The Qosmio g30-102 definitely supports the audio line in Jack S/PDIF. It s a headphone
    You simply use the right cable!

  • Qosmio G30-102: sound distortion occurs mainly when games are played

    Does anyone know how to solve the problems of sounds with the Qosmio G30-102? I installed all the drivers in Vista. Sound distortion produced mainly when games are played. Also reinstalled direct X9.c. Thank you

    Sound problems appear only while you play games?
    I think that this laptop has been delivered with Windows XP MCE has this same phenomenon occurs on Windows XP?

    Driver sound installation or update? It seems that the Toshiba driver page provides the audio driver for Vista for Qosmio G30-112 PQG32.
    The latest version is a pilot of its sigma 6.10.5324.

    By the way; Control Panel audio SigmaTel provides some useful parameters.
    There, you should turn off (disable) the power management!
    In addition, you can try to play a little bit with the digital Dolby Virtual Speaker dolby and pro logic II parameters.

    Check it out.

  • Qosmio G30-102 - update of the HD-DVD player

    Hello

    Despite having owned my system for nearly two years, I still had to use the HD of the STRANGE (TS-L802A) feature to watch HD DVD movies. I recently bought some old titles and started watching the first last week when after 10 minutes, the movie stopped and an error dialog box appears explaining that the media can not be read. After you haven't tried varioud reboots, re-install the reader software HDDVD Toshiba and a re-flash of the firmware still no joy to play HDDVDs. CDs and DVDs are still going strong.

    Since I was out of warranty, I put on the search for a replacement unit and found a system of opportunity-pull SD-L802B on ebay for a reasonable amount of money, but with the bezel of a Toshiba Satellite, I can quite easily change. I checked, double checked and triple checked that the SD-L802B reads HDDVDs, and according to the writing on the Toshiba site, it is simply a newer version of the TS-L802A with 8 MB of cache instead of the 1 MB mounted on the TS-L802A.

    So I bought the camera and having installed (and resorting to the peripheral solder pin 45 and 47 to make master) I'm finally greeted by a message popup explaining that the system has found a player SD-L622A. My heart is Serra.

    It is clearly a CD/DVDR drive despiet the fact it has SD-L802B emblazoned on it. V622 (which should maybe have the game away!) and the Bios is 70.

    It's a long shot, but I hope that the reader I can be flashed to make a complete SD-L802B on the remote hope that in all other respects the disc material is a 802, i.e. has HD ability but disabled for the 622. But my instinct tells me that it is in all respects a laser HD 802, but without the necessary decder, mounted on the PCB.

    I'm a little angry that the original drive has failed in the beginning of the first place, likely a laser non-compliant HD cpl standards, but now more then a disc labeled as L802B turns out to be a L622A...

    Any help appeciated, even if it is to confirm that the drive cannot be flashed to a 802 save me more time.
    I might try the Flash but I fear that he would be completely useless.

    Thank you

    Leo

    Hello

    To be honest, I can't believe that the HD-DVD SD - L802B drive has been flashed to be a SD-L622A.

    I searched a bit on the internet and found this Toshiba page;
    http://Toshiba-SDD.EMS-p.de/index.php?id=112&PID=221&SID=3
    It s clearly mentioned that this drive reads HD DVD (including DVD - RAM) DVD and CD media.

    But unfortunately, there is no update of the firmware or anything else that might set the drive to the SD-L802B.

    Maybe this isn't really a SD-L802B but it was sold as the SD-L802B

  • Qosmio G30-102 - another way to reboot without CD

    Hello

    Small problem, I decided to uninstall some toshiba that came with my laptop computer, like password utility and utility zoom and a little more that I don't remember.

    The problem is that now my HD DVD rom is not working and I can't find the correct driver for it. I tried the drivers toshibas site and searched the only thing I found was a driver DVD Ram I have re installed but that made no difference.

    I want to restart my laptop, so I can go back to the factory settings using my laptop efficiently even links (using the function key and selecting some features such as the brightness or Wireless on or off) not working again now.

    When I start the laptop, a message appears saying immediately * error * CD ROM, then windows will load.

    Someone please help me find the right HD DVD Rom driver or show me a way to restart the laptop without the need for the cd as an image in a rack or something!

    Thank you

    Damn!

    > The problem is that now my HD DVD rom is not working and I can't find the correct driver for it.

    The Windows operating system contains Microsoft own driver to recognize the CD/DVD drive.
    You n t need other drivers!

    If you CD/DVD drive don't appear in Device Manager and in the BIOS then it would mean that it is related to a hardware problem.

    So, if you didn t check this in the past. Do this!

  • Qosmio G30-102 not start after the SSD upgrade

    I have 2 x 840 Pro 256 GB SSD to install in my machine which usually runs two drives independently.

    I used the software to Clone of Samsun to clone my C drive which has XP on it.

    The cloning was successful.

    On the installation of the new SSD, it will be now does not start and keeps cycling to the F12 boot screen.

    I tried all the options without result.
    Any ideas?

    Hello

    I had a similar experience with an upgrade of the SSD.
    I used exactly the same software and has been able to clone partitions of HARD drive to SSD drive and my cell phone did not start the system from the SSD system partition.

    I figured out that the C: partition on the SSD was not marked as active.
    How I solved this?

    Well, I put the SSD in the 2.5 external USB enclosure. Then I booted the laptop using the old HDD. I connected the external SSD drive to the USB port.
    Then I went to Windows disk management and could activate the C partition on the SSD drive.
    Then I replaced the HARD drive with SSD and could boot. :)

  • Ethernet port not working not not on Qosmio G30 102

    Whenever I try to connect to something using my ethernet port only an orange light comes on at the back and nothing is recognized as being fixed.
    Is it a hardware fault or software? : S

    Also the power cable is connected

    Thanks in advance

    Hello

    In your case, I would first check device manager if the network card has been installed and recognized properly.

    In addition, you could remove the card from LAN from the list of devices and reboot the laptop. After restarting again the operating system should recognize the LAN card removed. Also you must download the driver of NIC in the Toshiba page and needs to be reinstalled it

    Last but not least, you should check your router settings may be possible not the network adapter does not work correctly but your router!

    Check it out!

  • Qosmio G30 102 Fan & screen freeze

    I was on my laptop the other day when I folded slightly the charger forest that goes into the laptop to the back and immediately the blue screen of death came and my laptop closed. I restarted my laptop only to realize that if I leave the charger in the fan will control which means it just starts going into overdrive without stopping and the laptop freezes and the only way to stop this is to swith the laptop off completely.

    I restarted my laptop thought if could be a problem of software, but as soon as I plugged a USB device as well as the charger my laptop even once broke down in the same way (fan in overdrive and freezing screen).

    I recently got my laptop fixed due to the card being damaged, and it was only 4-5 months ago, what could it be this time since no other defects were found.

    If anyone can help or give suggestions I would really appreciate it.

    Thank you

    You should get this replaced adapter, it may be a short circuit and causing the bad input voltage, with the result an unstable system.

    I would send the entire system to an ASP for repair.

  • Qosmio G30 display flickering and cannot connect to Windows

    I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
    Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

    After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
    My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

    Appreciate your advice before contacting the local support team.

    Thank you very much!

    Hello!

    That s a strange question. Do you have the same problems on an external monitor?

    If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
    Here you can find one:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

    Good luck

    Good bye

  • Qosmio G30 - external display problem (HDMI)

    Hello

    I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

    My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

    any ideas?

    Thank you
    Bran.

    Hi Brani

    It seems that the error comes from the display driver.
    Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
    You may notice some improvements.

    By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

    Good bye

  • Bad resolution of Qosmio G30 - external display via the HDMI connection-

    Hello! This problem makes me crazy, please help if you can...

    I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

    Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

    All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

    Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

    Hello

    I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

Maybe you are looking for

  • How to remove Yahoo Search from my toolbar permanently

    I tried to delete Yahoo by uninstalling, then re - download the latest version as previously indicated, but it is still there on the new facility. I'm not a technician and do not want to start the search or the deletion of the registry places.I never

  • the screen of my laptop is not proceed or turn on quickly

    Hello im from the LebanonI have a compac mini hp laptop I use for projects. I have a problem turning on the laptop. Once I turn it on, it takes an hour to see the screen. So I can't do anything because it's too slow!Used my little cousin and I donno

  • How can I retrieve an email sent?

    I e-mailed by mistake I want to recover without the drive of the consultation. How can I make my Hotmail account?

  • Windows 7 Genuine Validation failed after the update of the BIOS

    Machine - HP Pavilion g6-1010tu System - Windows 7 Home Basic 32-bit Recently I updated the system with the latest version of the BIOS, and suddenly to reastart OS is not genuine. I tried to contact Microsoft, and it did nothing, so I had to get off

  • Windows 8.1 will not sleep and error when restarting - DRIVING ME INSANE

    Hi guys,. Since the upgrade to Windows 8.1, my laptop never sleeps, now I updated the graphics drivers and it seemed to solve the problem but now it's back to not sleep well again and then just restarts my laptop and take 20 seconds or more to start