Qosmio G30 - 102 screen completely disappeared

Similar Questions

• Can Qosmio G30-102 - I use it as a HD for my PS3 screen?

  Hello

  I have a Qosmio G30-102 and I wanted to know it would be possible to connect my Playstation 3 via * HDMI *? For the moment I can use only cables AV that's really fustrating. If I can use the laptop as screen for my PS3, using the HDMI cable inform me please how to do that because I tried all methods I can think.

  Thank you

  MB

  Hello!

  Sorry, buddy, but this is not possible.
  You can use t as the screen of the laptop as a monitor. The laptop doesn't have a video input port, there is only for video output ports. This is the reason for this.

  So if you want a HD screen for your PS3, you will have to buy a monitor only. The laptop can be used for this.

  Good bye

• Qosmio G30 - 102 error display

  Hello

  In the space of one morning my LCD screen went from showing slight quirks to unusable as follows: Notebook details on foot.

  -Green mottled on Windows XP desktop background
  -restarted Windows XP OK todesktop, entire screen begins to blink on/off every few seconds, Win XP MCE booted up OK well
  -distortion of the images on the screen
  -now just blocks of color colours: white, green, cyan, flashing text etc.

  This is visible in the BIOS from Setup menu. Secure boot does not end

  Tried to output for external monitor, but not on a signal so not lock external of image at all.

  Enjoyed any insght on the problem. Not sure if chip screen or video. Is either a setting value when approximately 2.5 years.

  The BIOS is the original version 1.60 ACPI cannot see enough screen to try an update.

  I tried reinstalling all components - hard drives, RAM, took out battery ran on sector etc.

  concerning
  David (in the United Kingdom, UK purchase a Qosmio)

  Qosmio G30-102
  PQG32E-01600VEN
  Series X66249xxxG
  Windows XP MCE

  Looks like the GPU has a problem.

  I would like to send the laptop to an ASP (authorized Service Provider) for repair. There is a list of the ASP on the Toshiba site.

• Qosmio G30-102 - can I install RAM DDR2 - 667 Kingston rather RAM DDR2-533?

  Hello

  I have a Qosmio G30 102 and I wanted to spend my RAM to a total of 4 GB (currently I have 2 GB installed with specifications of a PC2 - 4300 DDR2 (533 MHz)). So I searched for RAM, and I wanted to know it would be possible for me to install.

  * Kingston Technology - memory 2 GB PC2 5300 667 MHz 200pin SODIMM DDR2 *. Would it work properly and if so it would be better than doing a (* 1 GB) memory PC2 - 4300 DDR2 (533 MHz) * the standard RAM installed on my Qosmio?

  Thanks in advance for the answers of th

  MB

  Hello!

  To upgrade RAM on my laptop, I used Kingston DDR2-667, and it works without any problems! :)

  Thus, you can use this module Kingston too but I guess that it runs only on due speed 533 MHz FSB of the processor limitation. You can check with a tool of information material such as Everest or PC Wizard 2008 for example the speed of the FSB.

  As far as I know, the laptop can be upgraded to 4 GB maximum RAM.

  Good bye

• Qosmio G30-102: why is put in Picture not installed Utility value?

  Hi-

  I recently purchased a Qosmio G30-102 with nVIDIA GeForce Go 7600. In Chapter 6 of the manual, it refers to the utility of photo as part of the QosmioEngine installation development. Appears not to be entered preinstalled on your laptop. How can I get this program and why is it not already there?

  Thank you

  Mark

  Are you sure that this app is missing on you laptop to 100%?
  I ask because usually the image Enhancement Utility V3.8.0.0 TOSHIBA must be installed

  The QosmioEngine is active when you use the Qosmio Player TV or the DVD player Qosmio. In addition, the image of Toshiba Enhancement Utility is available on models nVidia Go7300.
  If you have the nVidia Go7300 graphics card you might check the windows, tabs in the nVidia desktop Manager Applications

• Qosmio G30-102 Optical SPDIF not working not

  I bought the new Qosmio G30-102 and I'm sure that the connector SPDIF optical Out does not work.

  I can't test it now, but I had a couple of SPDIF sound cards and each of them had a red light on all the time, who reported that Optical SPDIF is supported.

  The Qosmio g30-102 definitely supports the audio line in Jack S/PDIF. It s a headphone
  You simply use the right cable!

• Qosmio G30-102: sound distortion occurs mainly when games are played

  Does anyone know how to solve the problems of sounds with the Qosmio G30-102? I installed all the drivers in Vista. Sound distortion produced mainly when games are played. Also reinstalled direct X9.c. Thank you

  Sound problems appear only while you play games?
  I think that this laptop has been delivered with Windows XP MCE has this same phenomenon occurs on Windows XP?

  Driver sound installation or update? It seems that the Toshiba driver page provides the audio driver for Vista for Qosmio G30-112 PQG32.
  The latest version is a pilot of its sigma 6.10.5324.

  By the way; Control Panel audio SigmaTel provides some useful parameters.
  There, you should turn off (disable) the power management!
  In addition, you can try to play a little bit with the digital Dolby Virtual Speaker dolby and pro logic II parameters.

  Check it out.

• Qosmio G30-175: screen starts flickering pixels & funny

  Hello

  I have PC laptop Toshiba Qosmio G30-175. I was working fine until last week. But all of a sudden screen looks funny disappeared.
  When I start the laptop, it starts well and windows start too thin.
  But a few early screen minute flicker and everything on the screen disappear and all the screen do cover with kind of pixels.

  Could someone please advice me, what went wrong for this laptop. Is the motherboard or card went graph.
  If so, how can I get it fixed at a great price.
  Is it possible to change the graphics card.

  much thanks

  Hi mate

  I think I have bad news for you.
  According to your description the graphics card chip begins to malfunction, and I think you have only one chance to solve this problem; the defective part must be replaced!

  I would recommend so contact the nearest authorized service partner in your country and ask for later handling.

  Sorry mate but it isn't alternative :(

  Good luck

• Qosmio G30 - blue screen of death

  recently I had this error on a blue screen when starting my pc (I can't go in either safe mode) so I decided to start from the cd and repair the system, but the problem is I can't boot from the cd or a port USB of my laptop Qosmio g30... the problem is that I tested the cd on my friends pc and it booted from it mine shows the following message
  "During initialization and the link...".

  PXE - E61: Media test failure, check cable
  "PXE - MOF: exit Intel Boot Agent.

  I really need help here and I don't like the data on my c drive, so if there is no solution I would appreciate

  Thanks in advance.

  Which CD you want to use for BONE repair?

  Akuma is right. This message occurs if the laptop can not boot from optical disc or HARD disk drive. Then automatically seek next boot device and it's LAN. This message is typical for the start of LAN (cable not connected).

• Qosmio G30 - black screen on external monitor

  Qosmio G30 (PQG32E) under Vista Home Premium, driver NVIDIA GeForce Go 7600, 7.15.10.9813

  I can't get a picture on a monitor external (I tried two different monitors). More precisely:

  "Windows Mobility Center" will recognize that a monitor is connected
  "NVIDIA Control Panel - Display Change Configuration" will recognize the external monitor ('Select poster that you want to use' shows 'Display of the laptop + Sony SDM-HS73', which is the monitor plugged in ext)
  but no matter what configuration I try using Fn + F5 or change of display Configuration, I can't do anything but a black (backlight) display on the external monitor.

  The monitor is receiving a video signal correctly: when he is off in laptop only the setting Fn + F5, it displays a warning 'no signal', but when turned on again I just get black.

  I tried to change the resolution for the external monitor settings. They exactly match the native resolution of the monitor. Still nothing.
  I tried 'Clone' and 'Dual View' mode.
  Tried various different orders to turn on the computer laptop and monitor, Plug and unplug the device, etc.

  Having installed the latest driver for the Toshiba (see above) site. Have NOT tried to install any other driver from NVIDIA site, as she warns to use Toshiba - but that's worth a try?

  The clean laptop screen and all other aspects of the video are very good.

  It worked ok in the past (I think that before I did the upgrade to Vista when it was still on XP).
  Should I just wait for another update of Toshiba driver and maybe Vista SP1?

  I really hope this isn't a hardware problem, because the monitor is recognized etc...

  Jonathan

  What port you used?
  The (analog) external monitor port or the output port D-video?

  View as far as I know that if you used the external monitor (analog) port, then you should choose analog in the nVidia-> current view

  Then, you can use the FN + F5 key to switch between the two views.

• Qosmio G30 102 Fan & screen freeze

  I was on my laptop the other day when I folded slightly the charger forest that goes into the laptop to the back and immediately the blue screen of death came and my laptop closed. I restarted my laptop only to realize that if I leave the charger in the fan will control which means it just starts going into overdrive without stopping and the laptop freezes and the only way to stop this is to swith the laptop off completely.

  I restarted my laptop thought if could be a problem of software, but as soon as I plugged a USB device as well as the charger my laptop even once broke down in the same way (fan in overdrive and freezing screen).

  I recently got my laptop fixed due to the card being damaged, and it was only 4-5 months ago, what could it be this time since no other defects were found.

  If anyone can help or give suggestions I would really appreciate it.

  Thank you

  You should get this replaced adapter, it may be a short circuit and causing the bad input voltage, with the result an unstable system.

  I would send the entire system to an ASP for repair.

• Qosmio G30 white screen when you start Windows XP

  Hi everyone - first time poster here!

  Today I turned on my Qosmio Toshiba G30 as I normally do, except that this time, the screen remained blank. Normally, the start of Qosmio screen appears with the music of Qosmio, but only Qosmio music out... no image on the screen! The computer continues to boot properly, but nothing has been posted.

  I panicked and I thought I'd need to buy a new computer...

  While I was on the phone with a friend to a support, I pressed the "TV Out" button (found in the upper right corner). That's it - the screen turned on, but all my icons have been reorganized.

  I tried to reinstall the display driver, but this is still the case every time that I reboot. The problem occurs not when putting the computer to sleep and look upwards again.

  Any help would be much appreciated!

  Thank you...

  Hello

  Check if the video output has not been set for external monitor or TV.
  You can change this by using the FN + F5 key combination.

  I also recommend to connect an external monitor to the laptop.
  Maybe you have defined somehow (accidentally) the external display as the primary display?  :|

  However, you are using Win XP as I m wrong not the laptop has been pre-installed with Vista. (is it true?)
  Maybe you should take a recovery disk Toshiba and must be reinstalled the self-image of Toshiba.

• On Qosmio G30 black screen after installing Windows XP

  Hello world
  I want you help me solve my problem.
  I have a Qosmio G30E - 148 and when you install a new program, the BSOD had been posted. prevents me from having access to windows from
  normal mode and safe mode.
  Then I installed a new Win XP manually and when trying to install the screen to black color display (nvidia geforce go 7600) driver and I turn it off
  safe mode in order to use windows.
  Another favor, I need a driver for ethernet controller and multimedia video controller because I can't find them.

  Thank you for all.

  Hello

  I have several question for you:

  -What system was installed before? Windows Vista?
  -where you have downloaded the display driver? On the Toshiba site?
  -You can find all the necessary drivers in the section download the drivers on the Toshiba site-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU
  Simply choose XP MCE as an operating system, the drivers are the same as XPPro/XP

  Hope I could help, if you have additional questions just ask. :)

  Greetings

• Qosmio G30 - black screen on startup

  Hello

  Having problems with my G30 at startup. I was watching TV using the media library (by pressing the shortcut of the TV next to the power button), but when I tried to reboot the system (by pressing the power button) all I get is a black screen! I hear the sounds of start and the hard disk icon flashes but I don't see anything. Suggestions welcome!

  Neil

  Hello

  Have you tried to connect the laptop to the external monitor to check if something appears on the second screen?
  I think that you should do this. In addition, you can try to use the FN + F5 key combination to switch between the two views.

  If this is not enough and you still won't be able to see anything, I assume that there is a serious hardware problem.

  In this case you should always contact the ASP in your country because in my opinion the simply, common laptop user would not be able to know what's exactly wrong because of the lack of experience and the necessary tools.

  Good luck

• Qosmio G30-102 not start after the SSD upgrade

  I have 2 x 840 Pro 256 GB SSD to install in my machine which usually runs two drives independently.

  I used the software to Clone of Samsun to clone my C drive which has XP on it.

  The cloning was successful.

  On the installation of the new SSD, it will be now does not start and keeps cycling to the F12 boot screen.

  I tried all the options without result.
  Any ideas?

  Hello

  I had a similar experience with an upgrade of the SSD.
  I used exactly the same software and has been able to clone partitions of HARD drive to SSD drive and my cell phone did not start the system from the SSD system partition.

  I figured out that the C: partition on the SSD was not marked as active.
  How I solved this?

  Well, I put the SSD in the 2.5 external USB enclosure. Then I booted the laptop using the old HDD. I connected the external SSD drive to the USB port.
  Then I went to Windows disk management and could activate the C partition on the SSD drive.
  Then I replaced the HARD drive with SSD and could boot. :)