Qosmio G30-126 (PQG32E) - very slow performance of HARD drive
I have improved my Qosmio G30 126 at 4 GB of Ram, SSD 64 HDD as windows7 boot partition and 500 GB 7200 64cache HARD drive as drive HARD secondary but I have a very slow HARD drive performance when working in windows7, but when I work on a virtual machine Windows XP, the disk HARD perforemance is fine.
I've upgraded all drivers from toshiba.com for windows7 ultimate 32-bit drivers including drivers from the chipset intel but my problem is not solved. I also check all other performance issues and its OK.
The same problem exsists on my old HARD drive on Windows Vista Ultimate 32-bit and Windows 7 ultimate 32 bit.
I used HD tune software to check my HARD drive it accelerates gives about 100bps in windows 7 for my SSD and it gives 285mbps (this is the actual read speed) in the machine virtual Windows XP and the actual speed is significantly different.
Please tell me what to do because I suffer from my laptop very slow and spend a lot of mony on it without more.
Hello
To be honest it is really hard to tell why you have slow HARD drive performance but especially it s associated with a large number of programs they are running in the background. How many processes are started after Windows starts?
Also, the antivirus program may affect the performance of the computer. I would recommend using the AntiVir freeware tool and the Windows Firewall. That's enough if keep you Windows up-to-date and use a new Internet browser.
Also check the other discussions of the forum on the slow performance. You can find a lot of useful tips to improve performance. For example:
-Defragment HARD drive
-Disable the startup programs you don't need
-Uninstall unnecessary programs
-Run the CCleaner tool to remove old registry keys
Tags: Toshiba
Similar Questions
-
Qosmio G30-149: how to make partion on HARD drive for installation Qosmio Player
Who can help... How to make partion on the new HARD disk for installation of QosmioPalayer of restore CD?
Details: Qosmio G30 - 149, I've changed my disks hard two 100/100 for hard drives 320/320 and now in train to install QosmioPlayer.
I tried a few ways to make partion.At the end and at the beginning of the 1st disk HARD, 2nd HARD drive.
But all the time I was following the fault: "the recovery is not supported on this system.Please, who knows what to do?
Wait a minute;
I wonder about this error message:
+ "The recovery is not supported on this system." + "Are you using the original recovery of Toshiba CD (DVD) that were shipped with this laptop?
Please note that you can only use the CD that have been designed especially for you, notebook series!
-
satellite 2520cdt is very slow after replacing HARD drive
My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.
Is there a solution?
Hello
I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
However, try to defragment the HARD drive. -
Qosmio G30: Try to install XP, but the HARD drive is not available
Two weeks ago, I bought a new G30 to Vista Ultimate inside. Many applications and devices based i.LINK cannot run on Vista and I decided to do a migration to XP PRO in time, pending new releases and manufactures of hardware drivers.
I have an original CD of Microsoft XP PRO, but when I try to install it, do not recognize the HD
Also, I try to use in the process of installing RAID HD XP drivers downloaded from the web site of Toshiba with a USB drive as a floppy drive 'A', because I don't have a disk external USB drive, but the start installation process do not recognize the format of stick memory (FAT).
Anyone know about this?
What is the good process of re - install the OS?Thanks in advance.
Hello
It's very simple.
The XP RAID driver must be installed from the USB FDD drive. You must store the RAID driver on the floppy disk, and then try to install it.Impossible to install the RAID driver from the USB key because the installer of XP not recognize and support.
RAID installation from USB can be done in Vista!
-
Qosmio G30 - 126 Sound drivers for win XP
I install Win XP on the second disk win xp professional, but I would not find drivers for thw sound system what can I do? I install Win XP MCE?
Hello
Why you n t trying to install this XP MCE drier sound? ;)
Choose the Qosmio G30-126 PQG32E series in the Toshiba driver page and download and install the driver audio Toshiba Sigma XP MCE! XP MCE is the same operating system uses the same file system under XP home or XP Pro. I am convinced that the driver will run!
-
Qosmio G30 - 126 - odd scraping noise
Hello!
I have a Qosmio G30-126 and OS Vista Ultimate. A month ago, my laptop was taken in service because it wouldn't turn on, but since last week, when I started it was a scraping extended noise at startup and since then, whenever I m listening to music or if the laptop is in sleep mode, there are some very weird scratching sounds coming out of speakers. Short sounds that keep repeats. Sometimes they stop after a few times and other times, like last night, I had to reboot.
I tried to update all available drives, but everything seemed to date. I googled the question, but none of what I found was also relative.
Can someone give me a clue as to what could be the problem? Is there something that I didn't think of that needs to be done?
Thank you very much in advance!
Have you tested with a helmet too? You hear the sound even when you listen to mp3 files?
-
Qosmio G30-126 - appcrash Vista Bright.exe
Hello
My Qosmio G30-126 bought he's 1 year provided with driver for Toshiba graphics card. For this driver with Vista is not software NVidia pages. If I asked for XP they said that Toshiba is selling laptop with Vista. Troubles were with flashing light and noise from time to time until arrived first update for Toshiba graphics card (November 2007). The sound was better, but while working, the display was on horizontal pieces. While there I find upgrade for Microsoft's NVidia graphics cards. I have download and can do scroll BUT better: the display came on the vertical pieces if I do not work. They have active air, this means that it is a little Flash.I have the laptop still under warranty for the next 3 years.
But when I was talking about this disorder to allow Toshiba service just after childbirth, they said "it's normal with Vista" :DI like solving problems like this...
APPCRASH is a normal window in my place. In recent weeks, it came with light control button... It is also the problem of Vista. I see on google (appcrash Bright.exe):(seulement Toshiba produit avec ce...)
Who can answer?
Post edited by: brahim
Hello
Are you using Vista or XP OS on this Qosmio G30?
You said something about XP. So I m not sure what operating system you are using now (Vista or XP)With regard to the bright.exe;
I think that the bright.exe belongs to one of the programs in the package of added value of Toshiba Vista (but I'm not 100% sure).
The VAP is a software package from Toshiba and it exists ONLY on Toshiba laptops ;) (maybe that's an explanation why you can only find it on Toshiba laptops)In any case, question you seems to be a software related issue and the solution is most often a new update and installation of updated drivers.
As I said it is not clear to me what graphics drivers you use and generally what you have installed on your laptop, but on the page of the European driver Toshiba you can find all the drivers for updates.
Your G30-126 seems to belong to the series of PQG32E. The area of G30 PQG32 you can find all drivers for XP (MCE = XP) and Vista drivers.
So, what to say, depending on your operating system, install the most recent drivers / tools
Goodbye & good luck
-
Qosmio G30 - 126 monitor become black and FN buttons do not work
Hello
I have small problem, ehm two problems, but may be small for you :)
Last week, I install Vista ultimate WITHOUT RECOVERY CD...
It's OK, but I close the cover of the book and instantly open, monitor become black and I can't do anything without restarting.
In the Panel in feeding opportunities, bookmark 'options to close the cushion' does not work.Maybe it's by, because I'm not driver if exists
And second problem may be linked with the first, but it is a mistake, because I was not discover drivers because I haven't hidden toolbar on the back Windows, where standartly is on-site.
I don't work much hidden functions under the FN key (I think that FN + F2, F3...) F12) most keys be the side POWER without multimedia keys on the music...
Thx for the help!
SRY for my bad English
Post edited by: Martiosso
Hi Martin
First of all it s interesting if you have downloaded and installed all the Toshiba Vista drivers that are published on the European driver Toshiba page?
All drivers must be installed in the correct order!If I'm not mistaken the Qosmio G30 - 126 belongs to the series of PQG32E. It was delivered with HD DVD player, and therefore, you should choose the drivers for the Qosmio G30 HD DVD (PQG32E)!
Please first check the file txt Instructions of Installation, and then install all the drivers as mentioned in this document.
With regard to the issue of the display;
You need to install the correct driver NVIDIA of the Toshiba page!The keys FN and control buttons don t work because the Vista Toshiba value added Package has not been installed. This package contains applications that are needed to get all the features of Toshiba running!
Good luck
-
Qosmio G30-126 - how to access the bios!
I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?
Hello
Try pressing the F2 key by turning on the device.
The Toshiba notebooks supported the ESC and then F1 button
If these two options are possible -
Driver problem Tuner TV PCI DVB-T/analog on Qosmio G30-126 & Win7 64 bit
Hi all!
I have red all messages on problem Toshiba PCI TV DVB-T/Analog hybrid Tuner on Toshiba Qosmio G30-126 and Windows 7 64-bit (x 64).
Unfortunately, I did not find solution in messages.I have computers portable two Toshiba, former a Toshiba Qosmio G30-126 & new a Toshiba Qosmio G50 - 12K.
On the new there is no problem with drivers and the new Windows 7.On the old but there are 2 problems. We're with the drivers for the buttons that do not exist. 2nd problem and more iritating is problem driver Toshiba PCI TV DVB-T/Analog hybrid Tuner (x 64) (code 39).
Now, I know that here probobly is no expert Toshiba ppl, but if there is any1 who has solved this problem, pls explain below how you did... at least until the Toshiba decide to new drivers relese in the near future.
Kind regards.
Hey mate
The problem is that there is no Win 7 64 bit drivers made the Qosmio G30 series.
You have to collect the drivers with your own hands!Here you will find a nice display:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49400You can test the Tuner driver for the Qosmio G45 - xxx series that seems to be compatible with the G30.
See you soon
-
Qosmio G30 - 126 - hdd instaltion Win7 or Vista appears
Hi all
I have a Qosmio g30-126 system.
I don't have the recovery CD.
I want to install the Win7 or Win Vista.
It is not showing me the two 200 + 200 HARD drive.Please tell to me what I'm doing.
Hi mate
I think that you don t need a driver SATA, but RAID driver!
AFAIK the Qosmio G30 supports RAID and so you must include the RAID driver.
Visit the page of European driver of Toshiba and download the RAID driver that is listed in the list.Note: Choose the Archive in the Type of product because G30 is an old series.
After having downloaded and uzipped the driver, you need to add this driver during Windows Setup configuration.
-
Can Qosmio G30-126 - I use the frequency refresh screen, more than 60?
Hello
My laptop Qosmio G30-126Problem:
My screen refresh rate is 60. There is an option only "60". How can I show more than 70-75-85.
Type as generic pnp monitor monitor showThank you
Hello
Please check this Toshiba document where you can find an answer to your question:
http://APS2.toshiba-tro.de/KB0/FAQ35007A001OR01.htmWelcome them
-
Qosmio G30-126 + graphic card GeForce 7600
Hello
as I've written before this graphics card was without original driver NVidia for Vista. I was always in trouble with graph and when it came the first update in October 2007, I was happy, but there remained only the Toshiba driver (nothing original for Vista to the web pages of NVidia). Later on came another bet to level, but still not original and it show me that the driver is named now GeForce 7650GS. Last week, I download driver direct from NVidia web.
Any person of any kind - change the name of the driver?
Hello
I put t know where you found the name of the graphics card but the Qosmio G30-126 was equipped with the NVIDIA GeForce Go 7600 name Code G73M graphics chip.
The graphics driver Vista and XP is available on the Toshiba page.
It s own modified Toshiba graphic driver and you should always use the graphics drivers from the Toshiba page to prevent the equipment from damage
Good bye
-
Qosmio G30-126: how simultaneously connect analog TV and TV satellite
Hi, I have a Qosmio G30-126 and you have a problem with receiving simultaneous TV analog (by TV-in the port of integrated TV tuner) and satellite satellite set - top box (by AV-in ports).
I can't program Windows Media Center for analog TV (but not satellite STB) per port, TV antenna and it works perfectly.
I can't program Windows Media Center for digital satellite STB (but no TV analog) channels by AV-in port and it works perfectly.
But I can't program Windows Media Center for the two TV analog I satellite STB, because during programming WMC forces me to choose between analog satellite or cable or SATELLITE box and does not allow me to choose two signal sources.For me, it's a big problem, because I have cable (analog) TV and satellite STB with digital channels. And I want to watch all the channels on my Qosmio.
Could someone help me?>... because during the WMC program forces me to choose between analog satellite or cable or SATELLITE box and does not allow me to choose two signal sources.
I think that in this statement you answered your question. I got Qosmio G30 a long time ago, and I also know that WMC can't handle with two sources of signals at the same time.
To confirm that contact Microsoft and ask them. I mean that they have designed WMC and know how it works exactly.Toshiba has to provide suitable equipment (TV tuner) to provide the TV option on this laptop.
-
Error message: 'No active PSA' with NetStumbler on Qosmio G30-126
Hi all
I have a Qosmio G30-126
I have the msg flashing "No APs active" with NetStumbler!
That means that?Hello
I n use NetStumbler and have no experience of witch this request, but I guess the active No. APs message means that no Wlan access point is activatied or activated.
I think that it is a special issue of NetStumbler and you should go to some sites of NetStumbler forums for more details
Good luck
Maybe you are looking for
-
Is there a way to default the parameter to 140% zoom in on each page?
I'm new to firefox, opera used for years, I tried to find a way for each page to be displayed to 140% zoom view since I was poor vision. I think I can I can use Ctrl + to zoom in, but I have to do it on each new page.
-
I hid my navigation bar, bar bookmarks, StumbleUpon and bar menus to the internet showing the larger screen, and I can not all bars come back now. I tried a click right, but all that is asking me if I want to open a new tab. == I closed the different
-
I want to create communication between two laptops by Bluetooth series
Hello I'm trying to accomplish communication series between two laptops via a Bluetooth connection. The two laptops are NOT portable Toshiba, but they work together the Toshiba Bluetooth Stack For Windows. They have both also use the default Bluetoot
-
Accidentally disconnected Macbook Pro on the first charge
I've been advised to load my new Macbook Pro 13 "8 hours for the first charge. I plugged it in for about 5 hours and the charger got accidentally disconnected from my mac but I've not noticed until 3 hours later and then I immediately plugged my char
-
Behavior strange table when getting values
I have a table that contains the TypeDef'd controls and I need to get a reference to the control of each element individually. To do this, I use the values property of the array Index that I put to the index of the item that I want to get. From there