Qosmio G30-161: update the Bios needed BACK

OK, I have a lot of knowledge about computer and please I need the Bios update but not windows based.
I need BIOS update traditional back!

The reason I want this is because blue screening in windows that I changed the HARD drive always even.
I changed the memory and checked the fans always the same.
I even tried to install XP using xp manual not restore disk using the sata drivers downloaded always the same.
So now I know 100% if I managed to get the back of the bios download that this problem will be solved.

Please, someone knows where.

Thank you

Unfortunately, Toshiba doesn't provide updates of the traditional BIOS. Only the win versions are available on the page.

By the way; Why are you 100% sure that the BIOS update would solve this problem?
BSOD problems are mainly related to the hardware malfunction or software problems.
Usually, you should recovery the Qosmio with the restore CD provided. If the BSOD will appear during installation or immediately after installation, then the hardware problems are possible

Tags: Toshiba

Similar Questions

  • Can Qosmio G35 - I update the BIOS to version 3.40?

    I've owned a G35-AV600.

    I download the file to update the BIOS ACPI of Flash by using the provided file 'qg35v34.exe '?

    I started to run the file, but I had a windows "enforcement" for several minutes with almost no disk activity. I assumed that the update of the BIOS is wrong and stopped manually (crazy, I know!).

    However, the laptop seems to continue working.

    Any suggestion? Should I run it again?

    I'm really confused. With other laptops and PC computers, the BIOS updates worked just fine and fast.

    Thank you very much.

    Hello!

    For the Qosmio G35 is already version 3.80.

    Download the latest version here and try again:
    http://www.CSD.Toshiba.com

    In the download of the package's documentation where you can find information how to upgrade the BIOS.

    Good bye

  • Update the BIOS on a booted TS140 UEFI

    My TS140 boots Win7x64 UEFI mode. It's fast and quiet and beautiful. It is due for a BIOS update, although its present 99 for later, A8A.

    Instructions to update the BIOS via BACK to call for the creation of a BACK with Rufus bootable USB flash drive. The flash player is likely to be a legacy MBR bootable.

    Is there a risk of harm a system UEFI boot from and update the BIOS with a disk MBR-started? I have to undo, redo, or whatever it is reset after perform the update?

    Hello

    You should be able to update via the BACK without any problem and should not affect your BIOS settings.

  • Qosmio G30 PQG31E - no driver XP 32? Cannot update the BIOS?

    As usual, obtained a computer laptop, but no recovery CD :(

    Got 32 installed XP (my Microsoft contract does not MCE) but a lot of missing drivers. Driver Toshiba page has all the drivers for XP MCE, XP 32 has only BIOS update, Bluetooth, HD - DVD firmwares, the virtual sound and drivers WI - FI!

    So I tought "Vista on this issue", but I checked the compatibility XP with Vista DVD I got a 'need to update the BIOS' (always a 1.40-2006/03/10)!
    My problem is that BIOS update always returns "this computer is not supported! Laptop has only one account, this isn't permissions problem, perhaps because many drivers are not present? Can I update the BIOS in safe mode?

    What now? Am stuck with a brick of Qosmio? Without controllers LAN to say the least, I can't not fact! Drivers XP MCE does work on XP 32?

    Any thoughts?

    Hello

    I found all the Win XP drivers for Qosmio G30 PQG31E!
    On the European driver Toshiba page, you can find the Win XP MCE drivers
    XP MCE drivers are the same drivers for Win XP Home or Pro.

    There are also some BIOS 3, 90-WIN and this BIOS is operating system independent. In other words, it works with Win XP and Vista...

    To update the BIOS the common Module must be installed
    You can find also on the European driver Toshiba page!

  • Qosmio G30 - I can't update the BIOS

    I have a Qosmio G30 * PQG31A-01Y01F model number * purchased from the Australia.

    I downloaded the update to the BIOS (version 3.90) of the Australian from Toshiba Web site. But it still says "the computer is not supported. I know that this message appears when you try to update the BIOS to one lappy with another.

    Its frustrating because I am very sure that I downloaded the correct bios listed on the Australian site. It is very incompetent on the part of toshiba for not providing the correct bios of the same.

    Why cant they put an all .bin file. Now they are confused with that support, they have released so many model of qosmio worldwide

    I need this update bios because because it's a model that has been registered under the program repair GPU. Lappy so expensive and they come with a such blunder upward.

    It's strange. I found the same BIOS on another site of Toshiba, try this: http://support1.toshiba-tro.de/tedd-files2/0/bios-20080911134528.zip

    PS. you have installed Windows 32-bit or 64-bit? Is it Vista or XP?

  • Qosmio G50-129 PQG55E - 64-Bit Windows 7 updated - update the BIOS?

    Hello

    I have a Qosmio G50 that I've upgraded to Windows 7 64 bit. My BIOS is unupdated for 6 months when I bought the machine.

    I went to update the BIOS, just to keep things updated, so I went through the pilot Online Assistant:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    And all information entered above, it provides:

    http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20090312131718.zip

    After having unpacked and P0060v210.exe running, he extracted, and then said:

    "The [error] BIOS update is not taken in charge of operating system. No support for operating system or service pack is installed. "(Word to all my friends of Googling!).

    Toshiba has an update of the BIOS for the Qosmio G50 is supported on Windows 7? Specifically for the 64-bit? They need to fix this glitch which orders to download this file when it is not clearly supported by Windows 7.

    Also, I tried to run it in compatibility mode with Windows XP SP2 and it worked fine - but I was nervous about going through the update if it didn't initially support Windows 7, so I do not continue to the next prompt. Is it safe to do? Has anyone else in this situation he does without problems? I read the BIOS updates can go horribly wrong, if not careful, so I hesitate to update the BIOS by performing the update in compatibility mode when it doesn't support Windows 7 on its own!

    Thanks in advance for any help and Merry Christmas.

    Hello

    I agree with bljuzga_1.
    Because the BIOS is independent, it shouldn't be a problem with the update using Win 7 OS.
    The error must be linked to your installed Win 7 OS and not the BIOS bug.

    It would also be possible that your value added package for Win 7 is not installed correctly.
    This package contains the TOSHIBA components common driver which is an essential component of the Windows operating system. He will have to make the other original programming TOSHIBA works correctly.

  • Question of updating the BIOS for Qosmio F50 - 10 k

    Hiya:

    + This Bios update adds functionality to your system. +
    + (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard. +
    "+ When the computer turns on, the BIOS is launched to perform various functions to start). +

    + For detailed updated information, please refer to Toshiba-setting to update BIOS Information +.

    + Toshiba - 2.00 - WIN32 Qosmio F50 +.

    It will work on toshiba F50 - 10 k, Windows xp, sp 3?

    [Notebook-> Qosmio-Qosmio series > F-> Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU]

    Post edited by: kirekk

    Qosmio F50 - 10 k belongs to the series of PQF55E.
    If you want to update the BIOS, you will need to use the BIOS exactly for the F50 PQF55E series.

    The European driver Toshiba page provides BIOS for Vista 32-bit and 64-bit OS.
    But this does not mean that you cannot use the Win XP

    I think you can use the Win XP but the fact is that the BIOS has been optimized for Vista and not XP

    The BIOS update should work also on XP, but in some rare cases the update cannot be performed and in this case, you will need to the Toshiba preinstalled the operating system in order to update the BIOS

  • Qosmio G30-161: can not see the second HDD in my computer

    Hello
    can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
    as I got when I bought the laptop.
    but for some reason when I go into my computer I do not see the 2nd HDD.

    There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

    Hello

    Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
    I guess you can see a single HARD disk due to the RAID settings.
    The unit supports RAID technology.
    I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
    Generally, it should be possible to disable the RAID.
    Check the folder utilities Toshiba.

    PS: It is possible that you will lose data after changing the RAID settings. Be careful.

  • Qosmio G30-161: how to install XP or where to find the restore CD?

    In my other post (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=29959&tstart=0) I asked if anyone had a solution to my problem, I thought at that time was RAID configuration. It turns out that it is my CD is corrupt.

    So now I need a new Qosmio G30 - 161 XP MCE install CD. Now, I've heard that there are a few programs, Fx. nLite, which can put drivers into XP installation. Is this true? I have a Win XP Prof instal cd.

    So here is my final questions (prioritized :))):

    1. How can I make my own CD for Win Xp MCE or Pro install?
    2. what drivers need to be included in the cd?
    3 should. what program I use?
    ______________________________________________

    4. If it is not possible for me to create my own CD, where can I buy one that works with my Qosmio G30 - 161?

    A response is much appreciated and wanted :) Please help me out here. I thank very you much in advance!

    Hello

    Yes, you can use the freeware software nLite to build your own windows CD and include the various drivers.

    With regard to the point:

    (1) I think you should google for nLite, because much useful documentation and instruction how to use the program nLite.
    (2) If your laptop supports the RAID drive I would recommend including only the RAID driver. Other drivers, you can install after the installation of Windows operating system
    (3) nLite is ok
    (4) you can order the new collection of EPA, which is responsible for your country.

    Best regards

  • Need help with my Toshiba remote control and receiver for Qosmio G30 161

    Hi all

    I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

    I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

    Also to confirm that I'm under addition of Windows XP MCE.

    Anthony Worlock

    Hello

    This remote will work, if you use it without any special drivers and special software, only in the Media Center.

    But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

    Please try this tool and check if it works.

    By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

    Welcome them

  • Satellite Pro A120: Need to update the BIOS after upgrade CPU

    Hello

    I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
    The laptop works very well, but for some reason any with the new processor fan runs always full.

    A lot, I searched but found nothing.
    The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

    THX in advance,
    John

    Hello

    First of all: update BIOS doesn t help you.
    Why do you think that BIOS update should help reduce the activity of fan?

    I guess that your new processor is faster. Right?
    So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

    By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

  • Question about updating the BIOS for Qosmio G20

    I downloaded the updated the BIOS of my pc, not the Qosmio, the instructions say it will unpack into 3 files, one being a floppy disk installation. When I unzip on my desktop pc, it makes a file that s too big for a floppy and he won t unzip further because it locks up my pc.

    Is it safe to make it work on my desktop pc it can unzip then in the three files and this will affect my BIOS or y at - it somewhere that I can download the floppy part on its own to load on a floppy?

    Hello

    Just a question;
    You have downloaded the Qosmio G20 BIOS on the desktop computer, unpacked and now you want it please on the diskette in the floppy drive.
    Is this good?

    So now my suggestion;
    Firstly that the Qosmio G20 BIOS and other BIOS Toshiba cannot be updated using the floppy! This isn't traditional BIOS!
    The BIOS from the Toshiba page must be updated when the Windows operating system is running!

    By the way: you can unpack the BIOS on your desktop computer, but don t try to run all files, because the bad BIOS can damage the motherboard ROM module!

  • Qosmio G30-161: cannot receive the signals of TV in MCE

    I recently bought the Qosmio G30-161 and have problems with watching TV via the media library. I get an error message that there is no signal. However another TV tuner I installed separately I'm not having any problems.

    I read somewhere that this could be solved by installing the last disc of tv tuner. If anyone can confirm this? If Yes, when I try to download the player from Toshiba online support, which comes in a file zip, after extracting it I don't see an option to install it.

    Thank you

    The second TV tuner installed on your Qosmio?
    Have you tested to receive TV signals without the second tuner but only with Qosmio internal tuner?

  • Qosmio G30 (PQG32E) - update BIOS problem

    I try to use this bios downloand - 20080424160754.zip support for laptop but when start telling me "this calculation is not supported" even help the firmware update.

    You will need to run the setup of BIOS with administrator rights. This can be easily done by right click on the setup and choose ' run as... '. ». There, you can choose if you run the file as a registered user or another (as administrator). If you set a password during the installation then you will have to type in the next screen, otherwise installation will continue and will update the BIOS.

    That's all...

    Welcome them

  • Need to update the Bios on the Satellite 4060XCDT to install Linux

    I need to update the bios to be able to install ubuntu 7.10 - where can I get the latest version of the BIOS?
    Thank you

    This laptop is a bit old and there is no real new version of BIOS.

    Take a look on this site
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    In the Archive you will find-> Satellite Archive-> Sate 40xx you notebook series and the BIOS.
    The most recent one was released the 16/05/02-> it s BIOS 8.20

Maybe you are looking for