Qosmio G30-163: HD-DVD player will not recognize the Matrix Trilogy

Similar Questions

• DVD player will not read the discs more after burn fail

  Something strange happen to my DVD player. I tried to burn a blank DVD but it failed without any error message: the DVD has not been recognized. Since then the DVD player will not only read one of my other burned DVD that I need for my daily work. Can anyone help?

  DVD players are not particularly robust, especially designed patterns for portability. It may have burned his laser for DVD work.

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Qosmio G30-163: encoder Windows media does not recognize video devices

  I can't get the Windows media encoder to recognize my video camera connected to the S-video (Qosmio G30-163) port.

  I have a similar problem with Web conferencing pro application Marratech (it crashes after 15-20 seconds if I try to use it-during the time the application is inactive - in configuration I see the photo/video test).

  If I use InterVideo® WinDVD Creator 2 Platinum software packaged for video capture it works fine.

  Hello

  In my opinion there would be something wrong with the compatibility of the MCE and s-video. Have you tried to run the MCE updates?
  If the s-video connection works with InterVideo WinDVD Creator, then I guess there is no hardware malfunction (s-video port).

  How about the video and the port? Have you checked if it works?
  This port allows you to import video data from analog video camera.
  I recommend you this option

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Equim M40x: DVD player will not change the region even with 1 change remaining

  I have a Toshiba Equim M40x with a carpet * a DVD - Ram drive 830 s. My children recently tried to play a region 2 dvd and it failed with the message the DVD player is set in a different region.

  When I went into Device Manager to change the region (it was set to 1), it showed that I had a chance to change.
  However, when I tried to change it, I received an error message: "unable to update region setting. Please make sure the drive contains a region 2 media and you have the privilege of the administration. »

  I tried to put a region 2 dvd in the drive and I have the privilege of the administration and it still does not work.
  I then went looking for firmware free region for this disc, and of course, it does not exist.

  Help!

  Hello

  It of not possible to unlock the DVD player on a legal way.
  Of course, I found many sites that suggest that it of possible to unlock the firmware flash drive.
  But believe me; It is not desirable and very risky!
  You may damage the disc and then you can not read or burn CD or DVD media!

  I assume that you have already changed the region 5 times code. In such cases, it s already locked.

• Equium A100-027: CD/DVD player will not read the CD data/music

  He'll read/play commercial DVDs, but music no commercial and data CD...

  I tried a new cd of norton, but do not read this and have tried other commercial programs but no luck... just click

  the same thing with music, tried I don't know how many discs, same result... help me please!

  Have you ever tried this method?

  Go to Device Manager and remove the drive from the list of devices CD/DVD.

  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart your laptop, and after that windows installs it again. Perhaps this may solve your problem.

• P-15 CD/DVD player, does not recognize the CD

  Hello

  I have a Satellite phone P-15 I had this past summer. The reader is MAST * A DVD-RAM UJ-811. Whenever I put in some audio CD, it will refuse to read them (these CD CD - r is not burned).
  The CD player will start to read the CD, but then it will make a clicking sound and to stop, then repeat this again and again. I tried to disable digital playback of CD, but no use.
  Someone at - there have any idea what the problem is? These CD play in stereos and CD player. What is the goal or the CD? Any help would be appreciated.

  Thank you!
  Taichi Nakatani

  Hi Taichi,

  is there a copy on these audio CD protection? This could be the problem!

  Another suggestion is to make an update of the Firmware on your drive!

  Going to the MAT * A directly or Panasonic (holding company).
  When google you around you'll find!

  Also, you can test if these problems occure with burned discs or an Audio DVD!

  Goodbye Tom

• Satellite A100-773: CD/DVD player does not recognize the CD

  Hello friends,

  I have satellite A100-773.
  When I turned on it today it does not recognize any CD. He acknowledges, however, DVD and can also burn CDs with Nero.

  As soon as I put in a CD it says (in German) something like "access denied, unauthorized function.
  It's a mystery to me what happened. Until yesterday, it was perfect. Now the same CD (and I tried 20) wouldn' work anymore.

  I tried the recovery system to an earlier point in time, but it does not help. In the hardware Manager tells me that everything is going well.

  Do you have any idea what it can be?

  Thank you very much

  Ognian

  Hello

  In such cases, it s is not easy to say why it happens.
  Usually if the drive cannot read media either material works badly or the CD / DVD is not compatible and taken in charge.

  But we hope that the equipment is not damaged.
  Try to remove the drive from Device Manager and restart the laptop.
  After that restart of the operating system should recognize the drive again and load the driver. Then you could try to test the drive again.

  I also found a very large Microsoft document on:
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129

  and this:
  http://support.Microsoft.com/kb/315350/

  The other possibility is to use the recovery CD to reinstall the OS.

• Why my DVD player will not see the disc of Windows 7 Installation?

  The TEAC DV-W58E DVD on my Dimension PC drive will play videos and games and will read and write data on DVD.

  Why he won't see the Windows 7 Installation disc that has delivered today? It's the only drive, that he has never read. He don't think that the drive is empty, sees just 0 used bytes, free 0 bytes.

  The drive is seen by the two other PCs but not one I want to install W7 on.

  My PC runs XP Professional and the Windows 7 Upgrade Advisor test and is up-to-date with Windows Update and has the latest driver for the DVD drive.

  I can't install the new operating system unless I can get the PC to read the disc.

  Cause the most likely not to read the DVD, is that its firmware is too old.  Double layer and encryption more recent methods are old 1 x, 2 x and 4 x dvd drives cannot read 16 x media recorded.

  Windows 7 has some minimum requirements.

  Windows 8 adds a lot of SPECIFIC requirements as NX Bit is supported in the BIOS.

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit), this excludes most INTEL 815 chipset

    Pentium 3 systems.  512 Meg is MAX for the 815 chipset.

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • DirectX 9 graphics device with WDDM 1.0 or higher driver.

• Satellite L - CD/DVD player will not recognize a blank BD disc

  My CARPET * A BD - CMB UJ141EL won't regonise a blank bd disk?

  Hi psykes58,

  You can also publish more information on your laptop model and operating system? A sentence is very short, what do you think? ;)

  In addition, it would be interesting to know if this drive was preinstalled or an upgrade of the road.

  It also happens with CDs and DVDs?

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">