Qosmio G30: Cannot install Windows 7 due to lack of RAID driver

Similar Questions

• Qosmio G30: Cannot install XP because of the RAID

  Hello

  I have a problem installing Windows XP PRO on G30.
  I have downloaded the driver RAID for Windows XP, make a copy of records in 'root' of the FDD.
  I have connected USB FDD and beginning of the installation of Windows
  You press F6 and install drivers TOSHIBA RAID
  Continue through the 1st partition of formatting.

  After installing Windows considered my HARD disk after formatting, I got this screen:
  ______________________________
  Insert the diskette labeled:
  RAID TOSHIBA driver
  in drive A:

  Press enter when ready
  ______________________________

  By pressing enter, nothing happens, just stay screen.
  Pressing F3 closed unexpectedly instalation!

  And again and again...

  Hello

  I think I have a solution

  I presume that you have formatted the HARD drive after installing the RAID driver. That's wrong! Don t it!
  If you format the RAID driver HARD drive is removed and the installation program cannot recognize the HARD drive!
  Once you have included the RAID driver from the floppy disk, you need to follow the installation of the OS.

  Please check this!

• Qosmio F10 - cannot install Windows XP Home edition with the new HARD drive

  My F10 won't boot from a hard drive and because of its obvious from the hard drive, it is definitely broken. I changed the build in Toshiba 80 GB HDD for a Toshiba hard drive with 60 GB.

  I put an Installation of Windows XP disc in the drive and press C at the start to boot from the CD. It does not start the installation, but on the contrary, he says that I have to remove the hard drive.

  Why? Is this only possible ti disc editing hard identical because there is not bios?

  HELP PLZ!

  Hello

  Your new HARD drive is recognized correctly in the BIOS?
  Check it!

  Plus when you get exactly the message installing Windows and which will be displayed exactly?

  Can try you with Toshiba Recovery disk, please?

• Cannot install Windows 8 due to ASUS AI Charger Plus - Incompatible with Windows 8

  Hello

  It has been two days now trying to get rid of the virus this is the ASUS AI Charger that prevents my upgrade of Windows 8 to continue.

  I used to own an Asus M/B, until he was struck by lightning and moved to a card mother Gigabyte and use it for months. I purchased Windows 8 and do an upgrade and now hit the following problem:

  ASUS HAVE load more - uninstall this application now because it is not compatible with Windows 8.

  For the life of me I can not uninstall this application completely. I tried literally everything I know and the results are always the same, the application is removed, but installing Windows 8 keeps pick it up.

  That's what I've done so far:
  Standard uninstall via Add/Remove programs
  Symantec PC Performance Toolkit uninstall and clean registry
  Revo Uninstaller
  Manual removal of the keys of all with the words "ASUS" and "AI Charger.
  MicrosoftFixit.ProgramInstallUninstall
  Windows Install Cleanup
  I also re-installed this application with several versions and tried the things above several times and just can not remove this thing.

  Any help would be greatly appreciated.

  Thank you
  Miguel

  There are some newspapers that you can watch here:

  C:\Users\[yourusername]\AppData\Local\Microsoft\WebSetup\Panther

  In the Panther folder, you could look at newspapers such as the setupact.log and setuperr.log.

  The AppData folder is 'hidden' so make sure that you are set up to see the hidden files and folders.

  I suspect that an older version of ASUS AI Charger is marked as the new version not marked.

  Find any ASUS directory in the Program Files directory and the Program Files (x 86) directory.

  Look for a folder of Asus under HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node registry key

• Satellite L655D-S5050 - cannot install Win 8 due to lack of driver SATA HDD

  Hello!

  I would like to reinstall the operating system on my laptop.

  I've never had problems with this before. I am trying to install Windows 8.
  And the problem is that it asks me the HARD disk driver.
  First of all, I changed in the BIOS in compatibility mode.
  And that did not help.

  Then I downloaded the drivers for my laptop chipset on the Internet, but it did not help.
  Then I thought it might be a problem with the HARD drive. So I formatted completely. But it did not help either.

  Where can be a problem? Or maybe I'm doing something wrong?
  Thank you!

  Post edited by: vadimmelnyk

  Hello

  I think that the Satellite L655D - S5050 (PSK2LU) supports graphics AMD (ATI) and chipset.
  This means that the ATI driver package contain the SATA driver files.
  I found the driver on the Toshiba page here we [Satellite L655D-S5055 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2711088& rpn = PSK2LU & modelFilter = L655D-S5055 & SelCategorie = 2756709 & selFamily = 1073768663]

  By the way: why n t make a Win 7 to 8 upgrade as described here:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletin.jsp?soID=3437733

• Tecra Z50 - A - cannot install Windows 10 due to bluetooth rfcomm

  I have a Tecra Z50 - A - 11 C and the app to get Windows 10 mentions the following meesage: "device manufacturers didn't have these Windows 10-compatible devices, so they do not work. Check with the manufacturers for support".

  Suggestions for the specific driver would be appreciated.

  Try to disable it in Device Manager before installing Win10.

  Windows Update should install a new driver, installed once Win10.

• Cannot install Windows 8 due to "system_thread_exception_not_handled.

  I got new pc with Win7 preinstalled with Win8 included on the dvd.

  So I decided to install the latest version immediately as an update. For the first time I chose the option with the recording of all the applications, files etc. Everything goes well except the part at the end when I received the error "system_thread_exception_not_handled. So I tried the upgrade without applications and settings, keeping only my files. Same story. So I decided to run as a bootable dvd. Nothing helps. Same format and delete all partitions and create new ones. I still get the same error at the end of the installation. And now I'm stuck with free pc of any operating system.

  After sailing through the web, finally I found solution how to install Win7 - it is mandatory to use the USB 2.0 slot for USB 3.0 not!

  Thus, in the future I will be faced with Win8 installation...
  Wire to close.

• Cannot install Windows XP on Satellite X 200 - HARD drive not visible

  Hello

  I don't want Vista on my computer.
  But when I want to install xp, which he refuses because he can't find the hard drive. Why?

  Thank you very much
  Best regards

  Post edited by: Gourdeaux

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=25749

  Good bye

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• Cannot install Windows 7 HARD drive problems

  Hi all!

  I have lenovo ThinkPad T540p. Intel Core I7, 8 GB RAM and 500 GB HARD drive. I think my HARD drive is Toshiba. It had Windows 7 on it, but it starts no more on this subject. When I start Windows is it shows 5 seconds black screen, and then it displays the Boot Menu. Well, I tried to reinstall Windows, but when I have to choose on which disk to install Windows, I get an error: "no hard drive found." And the list with readers is empty, so I can't reinstall Windows. I've updated the BIOS, but it did not help. Finally, I formatted my HARD drive and created two partitions on it. It worked, but not for long. I installed Windows 7. Everything was going well until I restarted my computer. And then I got the same problem: 'Cannot start from the HARD disk' and displays the Start Menu. Then I booted Windows installation and I got the same error: "no hard drive found."

  I don't understand what is happening with my HARD drive and that is to destroy his scores.

  And I don't think that my HARD drive is broken.

  I don't really know what to do!
  Please, help me!

  Thanks a lot!

  Here is the solution:

  My HARD drive was broken. I bought a new MX100 of Crucial SSd and everything is fine.

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.