Qosmio G30 - external display problem (HDMI)

Similar Questions

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• External display on HDMI overheating my Mac and drains the battery badly

  Hey guys.

  I am using a MBP retina 2012 15 inches with an external monitor, a generic LCD 1080 p via HDMI without problems. And recently updated for Sierra.

  The question starts immediately when I plug it into the screen. The Macbook seems to overheat and run fans above 4000 rpm, which is very audible and boring. CPU and GPU temperatures go above 70 degrees C (normally they make 50 +). The battery holds for only 1.5 hours, generally works well for 4-5 hours.
  I tried killing all apps, followed a bad process in activity monitor, changing default resolution - nothing helps so far. The CPU is barely used by 10%, the memory pressure is fine.
  It's just that time when I plug the screen - Mac starts bad feeling. Never, the problem occurred on El Capitan. Maybe it's a GPU problem, but certainly caused by the OS.
  All the world had the same problem?

  Try resetting the NVRAM (hold down the command-option-P-R on startup).

  Also, try to restart in Mode without failure, then normally again.

  Finally, try logging into your account, sign in to a user account (or the guest account) and connect the external display. Same problem? If it works fine for a new account then it's something in your own account which is the cause - perhaps an element of connection or some other system changes induced by the operating system previous and who does not play nice with Sierra.

• QOSMIO G30 - no sound on HDMI when connected to HDTV in XP MCE.

  Hello-

  Can anyone help with a frustrating problem... How output sound on HDMI in Windows XP MCE?

  I place the video on HDMI output using * Fn + F5 *-I get a perfect image on my HD TV. However, the sound always comes from my laptop speakers.
  I have all the latest drivers and BIOS downloaded from the Toshiba site.
  I entered the settings audio and Sigmatel and tried everything, in particular by unchecking + 'Activate Dolby Digital Live Support' + within the Dolby tab which is recommended in a support forum.
  Nothing works!

  It's relatively easy in Windows Vista, because you can change the audio device by default for + the device of digital output (S/PDIF) + and which switches to HDMI audio, but there is no option under XP MCE.

  Someone who can help to solve this problem is rewarded with all the points and have total gratitude and respect :-)

  Thank you

  Mark

  It is a Toshiba FAQ:
  + No signal on HDMI on Qosmio G30 under Vista +.
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZU0005R01.htm

  But he of described the problem with Vista OS.

  However, the screenshot shows the codec high definition audio Sigmatel.
  I guess it is the same device that you can see in the menu drop-down

  Maybe you have to activate it.

• Qosmio G30 - no sound on HDMI output

  Hello world.

  I read a lot of documents in this forum about my problem but no solution now.

  I have connected my Qosmio G30-155 (windows vista ultimate) to a full HD Samsung tv with an hdmi cable and the video is fine, but no sound. The sound is in the laptop speakers.

  I have the latest drivers: sigma - 6.10.5462.0

  TV works fine with DVD through HDMI recorder.

  Any idea?

  Thanks in advance.

  Hello

  Did you also check Bulletin for technical support with title cannot hear audio through a HDMI connection on a Qosmio G30 in Windows Vista?

• Qosmio G30 - E10: display resolution changes from 1920 x 1200 to 1024 x 768

  Hello

  Display resolution of Qosmio G30 - E10 passes sometimes 1920 x 1200 (my default) to 1024 x 768 after returning from standby or Hibernation

  I run Vista Ultimate, most recent display of the download area of Toshiba driver.

  This happened at any time, but sometimes.

  Any solution to this situation of bases.

  Kind regards

  Uwe Meyer, Germany

  Hello

  It's really not easy to say why it happens. I think that it of difficult to reproduce this problem, because it happens that sometimes ;(
  You said you are using Vista Ultimate.
  Have you checked if this happens using the Vista OS since the Toshiba Recovery CD?

  It would be very interesting to know if this occurs on laptop with Toshiba to factory settings.

  I found a thread on a similar theme;
  Someone suggested to update the graphics driver.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22553&MessageID=82906

  Perhaps a graphic driver of the www.omegadrivers.net or www.laptopvideo2go.com might help.

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• External display problem

  HI, I have a problem with an external display connected with VGA to my MBP retina using a useful of love at first sight.

  I used to have offices in each screen, so if I changed external '3' to the '2' in the display office desktop, Office on screen macbook used to stay in the '1' office that I was using, now if a change from one office to another (for example using gesture) screens of stand are affected, the son, I have the same number of jobs in each screen and if a want to change into a screen I can not leave the other in the office that I used.

  just to be clear, the screens are not in mirroring, they are separated, only changes in office in a screen also has an impact on another one (the contents of each office is not the same)

  Thank you for any response

  Try changing the 'screens have separate spaces' setting in the preferences system "Mission Control."

• Qosmio G30-140 - Console problems on new install XP MCE Raid utility

  I just bought a Toshiba Qosmio G30-140 of second hand. It has 2 hard drives and I tried to install windows 7 with great difficulty due to the raid driver... I managed to cmplete installation and travels account that half the utilities would not work in compatibility mode... Solution, I decided to re install the original Windows XP Media Center Edition, as I didn't have the original disks, I had many days of trial and error downloading different versions to work on my system... FINALLY, I GOT THE RIGHT ONE...

  Here's my question:

  I want to set up my machine to use the 2 drives in RAID mirror in case of data corruption, although I tried to install the RAID utility using the restore disc, I had created before embarking on this mission - suicidal

  IT WILL NOT BE INSTALLED, AND CONTINUES TO GIVE ME THE SAME ERROR OVER AND OVER AGAIN, EVEN IF I AM LOGGED ON ADMINISTRATOR
  error message is "("TOSHIBA RAID Service"Service [kraidsvc] could start. Make sure that sufficient privelages to start the services.) »

  I'm stuck and tried a lot of combinations, different and re-installed the OS twice, I am an administrator and possess these privelages. HELP :((

  Hi mate

  Installing the RAID driver could solve this problem...

  Also, I guess you used the right RAID settings in the BIOS.
  As far as I know, you can change the RAID option in the BIOS on the last page (3-3)
  RAID0 means stripping and RAID1 mirror you want to use.

  After changing the RAID parameters, you must confirm this insert the string 1,2,3,4 and enter.

  But note; After changing this you will need new OS install

• Re: Satellite A660-10W - connection external display with HDMI cuts sound on

  When I use an external display via the HDMI, it mutes the sound of the laptop.
  It's OK because the external display has a headphone/speaker output jack.

  However, when I close the external screen (which I use for movies only) and to use the laptop only, the sound is cut all the time that the HDMI cable is connected.

  I can't hear sound - by harman/kardon speakers or headphone - when the HDMI cable is disconnected (if the external display is turned on or off).

  Is there a way to allow me to have the choice and use her laptop - even when the HDMI cable is connected - in order not to keep plugging and plugging on?

  Thank you

  It is clear.
  If the HDMI cable is connected, then the digital output is defined as audio output by default and therefore you do not hear the sound of the internal speakers but on external monitor speakers.

  You need to change the sound settings.

  Go to control panel of-> sound-> reading tab and set the speakers to laptop as default.
  Then you should hear sound from the speakers for laptop!

• Qosmio G30 - no sound output HDMI with Plasma

  Hello

  I tried to coonect my g30 with a Plasma TV, I get that video without sound

  I changed my defult for digital output device (SPDIF Out) device, but it did not help

  I don't have that in playback devices is:
  Speakers / headphones
  Digital output device (SPDIF)

  Help, please

  Hello

  I don't know what Qosmio G30 exactly do you have and what operating system is preinstalled but maybe that this document can help you:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Check it out!

• Re: Tecra M5 - Windows 7 - external display problem

  Hello

  I have a Tecra M5 and now I decided to install windows 7 on it.
  Everything is ok except the external display output.
  Chosse the external display with shortcuts to windows 7 (w + P key) or Fn + F5, it does not work.
  The screen external ir well recognized, but there is no picture.
  The computer has the latest drivers from the toshiba support page.

  This experiment was done with resolutions and different monitors...

  Can you help me?

  Thank you
  Pedro Lisboa

  Hey Buddy,

  This means that your external display is recognized correctly in the menu display driver?
  Have you tried to extend or clone display in the display driver? Normally the external monitor should show a picture

  Have you checked if the other FN keys work? Maybe added package must be reinstalled to who controls the FN keys.

• BlackBerry Smartphones 8220 Flip external display problem

  I am a new blackberry owner and this is my first ever blackberry devive, so please be patient with me

  The external display on my 8220 Flip is not how it was all day yesterday after I bought it.  Constantly, the external display shows the clock and extinguish.  I loaded last night on the bedstand, and this morning it was still on.  Music playback works well, but the clock still shows if music while the valve is closed.  External for pause and volume buttons work correctly and cause externally 'now playing' screen appears briefly, but then it goes right back to the clock.

  I don't know exactly how this would have changed, but it seems to happen when I changed from one theme to another, unforutnately, that it has not corrected itself by returning to the correct behavior, after that I went back to the original theme.

  I'm almost certain that this must (eventually) have some sort of negative effect on the life of the screen and battery.  Can someone point me in the right direction to solve this?

  Thanks in advance!

  Contempt, I thought about it.  A hard reset is the display external back to normal behavior (remove the battery while the phone is ON, then wait a minute and then restarting him).

  Hope this does not become a regular thing with my new phone :-)

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• Qosmio G30 - 175 display starts to blink and walk and becomes unusable

  After a while my Qosmio display starts to Flash and works and becomes unusable.

  A friend suggested that it was overheating.

  So I've equipped with feet to the rear to raise him up to an inch.

  It seemed to work for a while, but now it is restarted.

  Has anyone encountered this problem?

  I wonder if I can increase the speed of the fan in some way...

  David H

  The idea with the breeding of the portable back was pretty good, but have you checked vents for eventual dust? If you find that some of them, use the jet of compressed air to clean.

  Also, I recommend a reinstall of your chipset and display drivers.
  I think there are tools around the internet to control the fan speed, NHC is one of them, but they are only 3 third party programs, you can use them at your own risk.