Qosmio G30 PQG31E - no driver XP 32? Cannot update the BIOS?

Similar Questions

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Tecra M3 PTM30E - cannot update the BIOS

  Hello

  I can't install my new Bios on the Tecra M3 PTM30E-09X01LEN system.
  The message says: not supported.

  Why?

  I put t he understand.

  Hello

  First of all, I want to ask you why you want to update the BIOS?
  You have some problems with the laptop that could be solved by the BIOS updated?

  Also what BIOS you use and where did you find and download?

  The Tecra M3 PTM30E seems to be a European model and the BIOS must be placed on the European driver Toshiba page.

  I checked the page and there are two versions of the BIOS;
  BIOS 1.20 - WIN-FBCF is only for the models with filter virtual control of Angle (FBCF)
  The BIOS 1.50 - WIN is for models WITHOUT filter the virtual control of Angle (FBCF)

  Seems that you used the wrong BIOS!

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• Satellite R630-13R - cannot update the BIOS

  Hello

  I downloaded a bios file for my ticket from the TOSHIBA support center but could not be updated. The message says "this computer is not supported", but I don't know I downloaded the right file.

  Could you please help me?
  Thank you!

  Win7:
  Install Toshiba Value Added Package

  WIN8/10:
  Install the driver of Toshiba and the Toshiba system settings system

• Portege R700 - cannot update the BIOS

  Hello
  I recently bought a Portege R700 19 M and I downloaded the latest BIOS version available in the Toshiba support page and when I run the .exe file, it does not work with this message: "the computer is not supported.
  And when I look in the HWSetup Toshiba tool, it does not display the BIOS version but some weird characters (letters not usual) so I can't find out which version is installed.
  Thank you for your help

  Hey Buddy,

  You update the BIOS to the version preinstalled Windows from Toshiba?
  Are you logged on as administrator when you try the update?

  To be honest I doubt a problem to update the BIOS because I found other threads where users report that BIOS update was successful.

• Satellite A300D-125 - cannot update the BIOS

  Failure of the update of the BIOS for Toshiba Satellite A300D - 125 PSAK4E (2, 80-WIN32 to 3.10 - WIN32).
  The source that I tried to level is 30/04/09 dated dated http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport1.toshiba-tro.de%2ftedd-files2%2f0%2fbios-20090430094605.zip

  Screenshot available for more information futrher.
  http://img12.imageshack.us/img12/6567/biosupdatefail.jpg

  Please help thanks.

  Also can someone tell me what's new in 3.10?

  Hey Buddy,

  For your model laptop is not a BIOS version 3.10.

  If you are looking for on the site of Toshiba Satellite A300D and PSAK4E model number, you can download the version 2.80.
  Version 3.10 is for other A300D models!

  You can check this on the Toshiba site and then stop to update BIOS please. You can destroy the ROM module

• NB200 - cannot update the BIOS error 1072

  I can't upgrade to new Bios 1.90 for NB200, error 1072, could they do?

  Thank you.

  I m glad to hear that! :)

  I guess you have extracted the files from zip archive. This is necessary before starting the update.

• Tecra M3 - cannot update the BIOS

  Hello

  I have a Tecra M3 (PTM30E) and TEMPRO says they are 2 updates of bios for the computer.
  I downloaded, but when I run it I tells me that the computer is not supported. How to upgrade the BIOS?

  Best wishes

  Michael

  Why in the hell do you need a BIOS update?
  Only because the Tempro said that there is a new update?

  TEMPRO sends only a notification that a new file has been downloaded
  It s not a recommendation that you have so far!

  So if your laptop runs without problem don't update anything!

  I always took this advice; never change a running system! And it of really wise counsel

  Welcome them

• Satellite A500 - cannot update the BIOS (error message)

  Hello

  I have a PSAR3A - 02U002 Satellite A500 with BIOS version 1.9 is installed.

  After reading several forums, I discovered that there may be a BIOS (v2.0) update available to resolve the current problem, these Satellites have with overheating cooling switch down.

  Excited, I have tried to install the new BIOS - this is what I get:

  "There is an error occurred, please check below the elements."
  BIOS version more than 200.
  Battery capacity more than 10%.
  AC is fixed. »

  First of all, my BIOS version is 190, no more than 200. Second, I find it very difficult to believe that the battery must be less than 10%. And third, I don't see what that remove the power supply cable will do.

  Please note that this update of the BIOS found on Toshiba's European website, but v2.0 claims to be a worldwide release. I then checked on the Australian site and there is no BIOS for my model. I don't know how to interpret this contradiction.

  Help, please!

  Hi umm_excuse_me,

  So I think that BIOS update is not available at this time for you. European and Australian models have different model numbers, so I doubt that the update of the BIOS is always the same. The pieces of equipment may also be different.

  In your case, I would wait until the BIOS was released on the page Australian too.

  By the way: where did you read that this update was release in the world?

• T420 BIOS 1.34 cannot update the BIOS

  Hello

  I am running UEFI BIOS 1.34 (ECP 1.11). Lenovo is delivered 1.37. I burned a CD with 1.37 to update my BIOS, but the utility tells me that an update is useless. I want to update the BIOS, because I have problems during startup when I connected USB devices.

  Anyone know a good solution?

  Thank you.

  I would like to download the BIOS and burn another CD and try again.

• DCC - cannot update the BIOS via command line settings

  I'm script an automated installation of Bitlocker on Windows 7 and 8.1 systems (company).  I use the last DCC and programs CCTK that came with it.  Systems have the latest BIOS updates, and are fully patched.

  I managed with several test systems (Win7, desktop computers, laptop computers (different models)).  I tried my scripts this morning on a laptop computer Win8.1 (Dell E6330) and as soon as my script runs to the addition of the password of the BIOS needed to make TPM changes ("cctk - setuppwd =" "") I get the following error:

  The required BIOS interfaces is not found on this system.

  I get the same error when running any other command CCTK used in my script:
  CCTK - tpm =-valsetuppwd =
  Activate CCTK - tpmactivation = - valsetuppwd =

  When I restart in the BIOS, no password has been set (all parameters are say no 'set') and the secure platform module is inactive.

  I updated to the latest BIOS (A14) and I get the above error message.  I know that orders CCTK I have scripted are correct, because they work on other systems.

  I wonder what could be the problem with this notebook and how I can come up with a solution.

  Thoughts?  Suggestions?

  Thank you!

  -Greg

  Just a quick update to let everyone know how I solved this:

  I had to install HAPI.

  On all other facilities that I have tested, just have the HAPI subfolder in the folder where CCTK. EXE was hosted was sufficient for work.  But for some reason some, in this case, once I installed HAPI and then ran my scripts again, they finished without a problem.

  I hope this helps someone else.  Seemed to be a solution simply absurd, but it is what it is.

• E6510 - cannot update the BIOS

  I need to update my Latitude E6510 BIOS patch A01.1 new. When I run the updater it starts, restart the portable computer but nothing happens. The BIOS is always on A01.  I can't launch the BIOS A02. Why does this work? Y at - it a way for the patch to work.

  NOTE: I'm sure this is the right file. My service tag to select downloads.

  BIOS A03 fixes this issue. Can now update the BIOS in Windows 7 64 bit.

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• Qosmio G30 - I can't update the BIOS

  I have a Qosmio G30 * PQG31A-01Y01F model number * purchased from the Australia.

  I downloaded the update to the BIOS (version 3.90) of the Australian from Toshiba Web site. But it still says "the computer is not supported. I know that this message appears when you try to update the BIOS to one lappy with another.

  Its frustrating because I am very sure that I downloaded the correct bios listed on the Australian site. It is very incompetent on the part of toshiba for not providing the correct bios of the same.

  Why cant they put an all .bin file. Now they are confused with that support, they have released so many model of qosmio worldwide

  I need this update bios because because it's a model that has been registered under the program repair GPU. Lappy so expensive and they come with a such blunder upward.

  It's strange. I found the same BIOS on another site of Toshiba, try this: http://support1.toshiba-tro.de/tedd-files2/0/bios-20080911134528.zip

  PS. you have installed Windows 32-bit or 64-bit? Is it Vista or XP?