Qosmio G30 problems at boot

Similar Questions

• Installation of Qosmio G30 problem

  Hello to all the boys

  I have a huge problem

  I have a Qosmio G30, recently he repeats, or used the disk, format it, confg. RAID, it will restart the formatting begins, ends will restart and the problem here.
  Resuming at the end of installation, which occurs not because the video driver crashes (nv4_disp). So, every time I turn on the PC are always half installation.

  I ask for help! And while we are to what you enter into the BIOS of Toshiba Qosmio G30.
  Thank you

  To be honest, your assignment is a little confusing for me. If I understand you right, you want to install own OS, right?

  Are you using the original recovery for the OS installation disc or you try to use the clean version?

• Tuner TV of Qosmio G30 problem

  Dear all,

  Laptop model: Toshiba Qosmio G30

  I formatted for computer laptop and installed Windows XP pro, I did my best installed all drivers and programs. I started to test for laptop, I saw a problem TV tuner. As we know before in the laptop was Windows Media center edition. Here we can easily use TV tuner with mild defect.
  My question is that, in WINXP PRO, how can I use the TV tuner? Cable antenna and other issues already resolved. When I'm TV button in notebook no reaction. Please help me to use the TV tuner. In the Drivers CD, I installed all the drivers and programs, but still no response.

  Waiting for your feedback!

  Hello

  Wait a moment Ilyas. You bought the laptop really super. The laptop is delivered and preinstalled as portable multimedia. If you use it with preinstalled WMC edition everything will work perfectly. Utilities, tools and drivers Toshiba designed allow you use, all manuals users described, functions. Exactly these tools and utilities are responsible for the harmonic use of all hardware components, additional buttons and preinstalled OS.

  Now, there is an absolutely new situation. You have preinstalled your own OS, configured and adapted from the OS to your own needs. Obviously there is no more this harmonic that I wrote in the topic, and now you're wondering why it does not work as before.

  Please don t be crazy about me, but I can compare it with the new car. Buy you a new, remove two seats and later wonder why there is no room for 5 people.

  Make sure that the TV tuner is correctly pre-installed and you can just use a third party application to watch TV programs. I hope that you will be able to configure correctly.

  Good bye

• Qosmio G30: problems with the reboot or shutdown

  My computer is a Qosmio G30 and there is this problem of restart or shutdown. I click the icon once and it closed to some programs. I had to click on it again to restart or stop.

  How to remedy?

  Hello xingmao

  It seems that some application fails to close properly. It is difficult to say that who and why.
  Try to uninstall the software that you have installed right before this problem started for the first time. With a bit of luck, you might find the cause. Otherwise, you can do a final solution a recovery facility.

  Windows associated problems are really difficult to locate.

  Concerning
  chain

• Qosmio G30 - problem after the system recovery procedure

  I Qosmio G30 - 148 who have Windows XP MCE, trying to download some system programs crashed and make automatic restart.

  I then used a RECOVERY CD to recover my system all and followed the instructions on the CD but when finished and restart the system, a famous blue screen telling me there is a problem in my system and windows must be restarted.

  When restarting in safe mode, it is a message telling me that the system is not fully installed. Please, rerun the Setup program.

  You could any body help me in this problem because it's a strange problem?

  Note: I tried to install Windows XP from external CD but the system did not have the hard drive.

  You are right. It's a really strange problem. I don't know if you use some external devices but before you start recovery procedure please remove all connected devices.
  The fact is that this recovery image is designed for this model of laptop and the specific hardware configuration. If the BSOD occurs after the installation of the image it takes little hardware related issue.

  I don't really have any other explanation. Problem is that no one here will be able to offer an accurate diagnosis, and we can only speculate what may be the problem.

  Try to do it again to the recovery facility, but if the problem persists I fear that you need professional help.

• Your files to .ts HD - playback on Qosmio G30 problem

  Hello

  I have the Qosmio G30 with HD-DVD player and it should read your HD files without problem. However a friend has registered some HD programs using his freesat box which he carved on a HD for me in the .ts format.

  I can read files, but if I try to play in the media library, WMP or Media Player Classic, the sound plays out of sync and sometimes I read stuttering or occasional polyhedral objects.

  Can anyone help?

  Garrett suggested the Toshiba provides a clean HD player. Have you tried this one?

• Qosmio G30 problem composite S-video

  Dear Sirs,

  I can t of PAL video capture using the capture win DVD creator section.
  I even tried to change the settings from NTSC to PAL, but he knows nothing.

  Please advice.

  Hello

  The G30 supports s-video IN port on the right side for laptop.
  You must use an s-video cable to connect the two devices.

  After having connected the two devices Win DVR starts to pick up the signal.

  If that doesn't work not in your case the problem could be related to in-to-composite S-video adapter.

• Screen with Qosmio G30 problems?

  Hello
  The screen of my laptop begins to have strange colors and then goes black when I turn on the laptop, G30-148 computer.

  My University, IT supports diagnosed the problem as a problem of map chart/subsystem. I contact a provider authorized Toshiba, but unfortunately, they couldn't fix the problem the first time.
  The second time it has been resolved temporarily as it occurs in less than a month and now I am unable to use my laptop :-( I hesitate to return my laptop to the authorized supplier. Any solution?

  Hello

  I don't know how he solved the second time, but according to the description of your problem, there is certainly a bad operation of the equipment and for me the only solution is to repair and motherboard changes. Sorry, but I think you should contact ASP again.

• Display and boot on Qosmio G30-117 problems

  Hello

  My Qosmio G30 (117) has problems to start. Basically the Qosmio title displays properly, but as soon as Windows XP appears, it is as a grid of white dots on the screen. He will then drain and take forever to get into windows. The grid of points remains all the time.

  My hypothesis is that sound my display driver, but get an update is a challenge. When I try to download from the page drivers it says that there is none. The search is based on the model of my PC, it should be no wizard

  I can't get into XP in safe mode.

  Real question is, is this my driver or is this a hardware problem?

  Thanks for your help,
  Peter

  Hi guy,

  that looks a little a hardware problem but before we get into it, you should download www.laptopvideo2go.com drivers (Please read the FAQS on this site!) and then, if the problem persists after installing new drivers, you must contact a local authorized toshiba service.

  I give you a link if you really want to contact an ASP (Authorized Service Partner):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck buddy and good weekend

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Qosmio G30: Boot from HDD external ESATA

  Dear all,

  I am trying to boot from a disk external HARD connected with an express/34 card that has a START function. It works like one charm on another laptop manufacturers because the express/34 card is recognized without problems. I can choose the external sata HARD drive as a bootdevice.

  My BIOS (V3.5) Qosmio G30 seems not to have this option. Any suggestions? Thank you for your comments!

  card esata Express/34: http://www.cooldrives.com/2saexcadues.html (ROM BIOS supports boot features)

  Kind regards
  Nboss

  Hello

  These function the BIOS boot options.
  The BIOS that is installed on the G30 is no option. So unfortunately, but there is nothing to do!

  Best regards

• Qosmio G30-162 - BIOS update problem

  Hi, I have a problem with the update the BIOS on a Qosmio G30-162, which seems to be running the following version: -.
  Version 1.20
  Version 2.3 of DMI
  Date of the BIOS 21/01/06

  Whenever I run the update V3.90 it is said that it is not valid for this machine.

  Anyone know how to fix this?

  Thank you very much

  The BIOS update I'm running is V3.2.9 (P0038v390.exe)

  When I run the files of the update says that "this computer is not supported.

  Thank you very much

  Hello

  Do you have what Windows OS installed?
  If you have installed Win XP then the common Module must be installed before trying to update the BIOS.
  If Vista is installed, the VAP (value added package) must be running.

• Sound on Qosmio G30-140 problem

  I have the sound problem. I formatted my laptop and everything was fine, but the sound does not work.
  I checked all noise related in my laptop, it was beautiful, but the sound does not work.
  I downloaded the sound on the net and also the sound still not working!

  How can I solve this problem?
  My laptop model is Toshiba Qosmio G30-140

  > I formatted my laptop and everything was fine...
  This means that you have installed the operating system using the original facilities Toshiba disc?
  Sound card recognized and listed correctly in the Device Manager?
  Make sure that the MUTE option is NOT selected.
  Make sure that the volume level is not set to the minimum level.

• Driver problem Tuner TV PCI DVB-T/analog on Qosmio G30-126 & Win7 64 bit

  Hi all!

  I have red all messages on problem Toshiba PCI TV DVB-T/Analog hybrid Tuner on Toshiba Qosmio G30-126 and Windows 7 64-bit (x 64).
  Unfortunately, I did not find solution in messages.

  I have computers portable two Toshiba, former a Toshiba Qosmio G30-126 & new a Toshiba Qosmio G50 - 12K.
  On the new there is no problem with drivers and the new Windows 7.

  On the old but there are 2 problems. We're with the drivers for the buttons that do not exist. 2nd problem and more iritating is problem driver Toshiba PCI TV DVB-T/Analog hybrid Tuner (x 64) (code 39).

  Now, I know that here probobly is no expert Toshiba ppl, but if there is any1 who has solved this problem, pls explain below how you did... at least until the Toshiba decide to new drivers relese in the near future.

  Kind regards.

  Hey mate

  The problem is that there is no Win 7 64 bit drivers made the Qosmio G30 series.
  You have to collect the drivers with your own hands!

  Here you will find a nice display:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49400

  You can test the Tuner driver for the Qosmio G45 - xxx series that seems to be compatible with the G30.

  See you soon

• Qosmio G30-140 - Console problems on new install XP MCE Raid utility

  I just bought a Toshiba Qosmio G30-140 of second hand. It has 2 hard drives and I tried to install windows 7 with great difficulty due to the raid driver... I managed to cmplete installation and travels account that half the utilities would not work in compatibility mode... Solution, I decided to re install the original Windows XP Media Center Edition, as I didn't have the original disks, I had many days of trial and error downloading different versions to work on my system... FINALLY, I GOT THE RIGHT ONE...

  Here's my question:

  I want to set up my machine to use the 2 drives in RAID mirror in case of data corruption, although I tried to install the RAID utility using the restore disc, I had created before embarking on this mission - suicidal

  IT WILL NOT BE INSTALLED, AND CONTINUES TO GIVE ME THE SAME ERROR OVER AND OVER AGAIN, EVEN IF I AM LOGGED ON ADMINISTRATOR
  error message is "("TOSHIBA RAID Service"Service [kraidsvc] could start. Make sure that sufficient privelages to start the services.) »

  I'm stuck and tried a lot of combinations, different and re-installed the OS twice, I am an administrator and possess these privelages. HELP :((

  Hi mate

  Installing the RAID driver could solve this problem...

  Also, I guess you used the right RAID settings in the BIOS.
  As far as I know, you can change the RAID option in the BIOS on the last page (3-3)
  RAID0 means stripping and RAID1 mirror you want to use.

  After changing the RAID parameters, you must confirm this insert the string 1,2,3,4 and enter.

  But note; After changing this you will need new OS install