QOSMIO G30 - RAID-1 is GRADIENT, the search for a solution

Hello

My QOSMIO G30 is confirgured in RAID1. Today the second hard drive failed, unless I hard when I saw "RAID-1 is DEGRADING" displayed on the screen to power on the computer. Once booted Vista Ultimate, I get an error indicating that the Toshiba Raid Service had stopped unexpectedly (this message is also recorded in the system event log). "Unable to get the State raid console display."

Go to the BIOS Setup, I see that the secondary hard drive is in the State has failed while the first is in the online state. The two hard drive are marked "RAID-1.

I restarted after removing the second hard drive in the system. Of course, I always get the message from the bios. Vista boots normally and then I get an alarm saying the raid is broken. It's perfectly anticipated if only the second hard disk is now deleted.

I connected the hard drive to a SATA Transcend USB controller and it work perfectly! Then I reinstalled the hard drive in the computer. After the reboot, the raid service accident again. The first hard disk is functioning stil and I made a backup full, just in case.

I searched a lot for a procedure restoring the second hard drive operation, but I've not found anything really helpful.

Go into the BIOS, if I change the disc to nothing else than "RAID-1" mode, I said that I have to reinstall the OS. I don't want to do that. I want to back the second hard drive in operation. I want to have the mirror restored from the first hard drive on the second hard drive, without losing the contents of your hard drive.

Any help is appreciated.

--
F. Piette

Advertisement

This with changing RAID mode and install of the OS is just because when you change the RAID in the BIOS operating system must be installed again. RAID info should be saved into the MBR.
What RAID driver and RAID utility do you use?
One last thing: is your laptop preinstalled with recovery Toshiba (32 bit) image?

> I want to put the second hard drive in operation.
To be honest, one thing is not understandable to me. Are you trying to get old HDD (a second) working again or you have new HARD drive (as a second) und try to have mirrored hard drives again?
Have two exact hard drives the same capacity?

Tags: Toshiba

Similar Questions

  • Qosmio G30: I can't find the Linux for the Bluetooth and TV Tuner drivers

    I have the Qosmio Q30 HD-DVD (PQG32) on Ubuntu Linux. My problem is that I can't find drivers for Bluetooth and TV Tuner.

    Toshiba supports Linux? If so when I find it?

    Hi mate,

    Unfortunately toshiba officially doesn´t support linux, there is officially no drivers available. But toshiba has created a site for linux users, where they can find useful information:

    http://Linux.Toshiba-DME.co.jp/Linux/

    I hope you get what you need. :)

    See you soon

  • Qosmio G30-163: how to change the settings for the keyboard in the UK

    Hi, I bought a Toshiba UK G30-162 and it does not have a Uk keyboard (directed by Vista), main caps do not correspond to the key. That is to say an umlaut = ', + =-.

    It took me a long time after that.

    Hello

    What type of keyboard you have now? And how to think that Don t you have a UK keyboard?

    Is a sign of (euro) on your "E"? If so then you probably have a German or a keyboard of france. If this isn't the case, then you have an American or a UK keyboard.

    Just look at your settings in your systemproperties.

    Welcome them

  • The search for a solution in detail FieldPoint error

    everything by deploying the projects(using_Fieldpoint_Hardware).it deploys successfully, but when I run my program host. giving a TCP/IP connection error
    error:
    using two screws
    1 acquisition of data vi. It acquires data using FP Read.VI
    2 program.
    It is using the TCP/IP protocol to connect, but gives an error.
    (Error 63 appeared to TCP connection open in TCP _IP_host.vi-> Main_Host.vi
    Reason (s) possible
    LabVIEW: Serial Port receive buffer overflow.
    LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. For VI Server, make sure that you have enabled the server from VI tools > Options > VI: Server Configuration.)

    You have it solved? Can update you?

  • the search for a solution to run foglight report online cmd

    Hello

    I'm looking a solution to run the report (based on a model of fms server) foglight in the cmd line. (via groovy or fglcmd or another way)

    The goal is to start a relationship with some of the arguments when a fire of specific rule.

    Someone has an idea?

    Kind regards

    Eric.

    Hello

    This thread seems to have information on what you are looking for: http://communities.quest.com/message/53728

    Condition of a rule or a script related to a rule action can run this API. Be careful though, as the condition can trigger several times causes a performance issue when the report is run several times in parallel.

    Concerning

    Nils

  • I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

  • Stop the search for the missing files from LabVIEW

    Is there a way to prevent the search for lack of screws LabVIEW? If I load a VI and one of its dependencies is spent, I want LabVIEW to fail immediately and to wonder where is the file.

    What version of LabVIEW are you using?

    Just hit ignore.  It stops to load files that it cannot find and load than it can.

  • I want to uninstall a toolbar that has been the result of the search for something specific

    Hello

    I want to uninstall a toolbar that has been the result of the search for printable piano music.
    I uninstalled the stuff accompanying this research but I can't get rid of the toolbar. Can I just download an another toolbar as C.NET or what?

    I have a Dell dimension 4700 desktop, XP and I have ' yet to learn through this forum help and everyone.

    Thank you

    Gina Davis

    Original title: how to uninstall toolbat Inbox

    (IE unknown version)

    Hello

    Tools are what bar you referring? That's a browser or another program?


    Method 1:
    Run this fixit to remove it completely.

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

    Method 2:
    You can uninstall the toolbar by following the steps below:
    a. open your Internet browser.
    b. click on 'Tools' then 'Add-ons' in IE; Click on "Tools" and "Manage Add-ons."
    c. find the add-on "Toolbar" in the list of available modules.
    d. remove the add-on toolbar in Internet Explorer, select the toolbar and click "disable".
    If you want to remove the toolbar, you can do this by uninstalling it in Add or remove programs.


    Also visit these links to learn more:
    http://TechNet.Microsoft.com/en-us/magazine/dd364987.aspx
  • Windows 7 continues the search for updates

    Recently, I have restored my laptop to factory settings, and after you install the service pack 1 update, this does not block the search for updates.  I tried everything on this site but without success.  Help, please.  Thank you.

    The installation of the plant is the worst possible Windows, that no tech fan would go because of the bloatware and installation utility factory duplicate that interfere with better integrated in the operating system versions.  Corruption as it is so just wait until you make a clean reinstall Windows 7 .

    If you want to try to wrestle with the factory install, so first thing I "d to recover some lost performance is Clean Up Factory Bloatware. "  It also checks and fix the integrity of the installation itself, which is not only limited but damaged by bloatware.

    Then, if the problem run the troubleshooting Windows Update - Microsoft Windows Help tool

    Then, try to Reset Windows Update components.

    Finally, as a last resort, run the System Update tool .

    Let us know how it goes and if there are any questions or problems.

  • My computer (explorer.exe) continues the search for readers/records.

    Hi experts, I need help on my PC.
    After working with my PC for several hours and minutes when I click/Open 'My Computer' it continues the search for my hard drives and folders in libraries, favorite & computer. He just continues to research and does not display my partition/HARD drive. http://i793.Photobucket.com/albums/yy217/aznix2020/Untitled.PNG
    However, its not freezing or hang up and I can always open my drives/folders by using the command run and after a while it will work fine again.
    Is not a serious problem at the moment because it works well after a while but it's a hassle.
    Also im wondering if this is my drive display relationships safely remove HARD in the options in the task bar. Although the option remove appear for less than a month before I encountered this problem.
    My PC is win7 32 bit sp1. Thanks in advance.

    This problem can be caused by a video driver obsolete or damaged, file system on your PC can be damaged or do not correspond with other files and certain applications or services that are running on your computer may be responsible for Windows Explorer to stop working.

    Refer to the following suggestion and check the status of the issue.

    Install the following update and check if that helps

    Windows Explorer may hang in Windows 7 or in Windows Server 2008 R2.

    https://Support2.Microsoft.com/kb/2515325?WA=wsignin1.0

    If the problem persists, see the suggestions mentioned in the following and check the status of the issue

    Error: Windows Explorer has stopped working.

    http://support.Microsoft.com/kb/2694911

    Note: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

    Please let us know if you need assistance.

  • e-mail Outlook 2013 index is not in the search for a window 7

    Dear all

    Research of a window does not work correctly.
    My emails are not yet indexed and watch not when he search with the search for a window
    Please help me what I can do to fix this
    Thanks in advance
    RAM kishanso

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-files/a-guide-to-using-Windows-search-two-alternatives/2ec3ce7e-e7e3-4EBF-85f8-1263ecdc99bc

  • has someone at - he found a solution to the search for global marker?

    has someone at - he found a solution to the search for global marker?

    the glaring omission of global search for markers - or exclusion of metadata to the project search function marker - is a big handicap for any project of long form doc.

    Is there a work around or maybe a plan to remedy this bizarre situation in an upgrade?

    big fan of the first, and even if there is plenty of downturns, it seems as if there is always planned if solutions non-existent

    Thank you!

    Hi Charliepus,

    Sorry about that. Create a feature here: http://adobe.ly/feature_request

    Thank you
    Kevin

  • Using synonyms in the search for name

    Hello

    I try to use synonyms in an oracle namesearch. Set up a seqarch name as in the second example described in the developer's guide to the oracle text to http://download.oracle.com/docs/cd/E18283_01/text.112/e16594/search.htm application

    Now the name, for I am looking can hold one '&', for example 'B & V '.

    I would like to find this text when I enter "B & V", B & V' or 'B and V.

    I found a thread on how to set up a thesaurus with synonyms for '&' and 'and' to 'and' and ampersand or special characters

    Now I'm wondering how to combine this.

    Thanks for the help in advance,
    Dirk

    Your change was correct and it works. For reserved words in the braces enclosing aims to tell Oracle Text as text rather than apply the special meaning they have as reserved words. Since "und" is not a reserved word, it didn't need to be escaped by placing braces. When you set "&", then "und" synonymously as you did the search for 'B und V' correctly found "B and V, as in the modified below demo. In this particular case, the search might work without applying the format_string, but you need to keep it in the query so that it is applied to these values in need, for example, if you searched for "B & V' or 'B & V".

    [email protected]_11gR2> create table emp (
      2        first_name    varchar2(30),
      3        middle_name   varchar2(30),
      4        last_name     varchar2(30),
      5        email            varchar2(30),
      6        phone            varchar2(30));
    
    Table created.
    
    [email protected]_11gR2> -- added row of data:
    [email protected]_11gR2> set define off
    [email protected]_11gR2> insert into emp values
      2  ('Jane', 'Doe', 'B & V', '[email protected]', '321-654-0987');
    
    1 row created.
    
    [email protected]_11gR2>
    [email protected]_11gR2> create or replace procedure empuds_proc
      2       (rid in rowid, tlob in out nocopy clob) is
      3         tag varchar2(30);
      4         phone varchar2(30);
      5  begin
      6    for c1 in (select FIRST_NAME, MIDDLE_NAME, LAST_NAME, EMAIL, PHONE
      7              from emp
      8              where rowid = rid)
      9    loop
     10         tag :='';
     11         dbms_lob.writeappend(tlob, length(tag), tag);
     12         if (c1.EMAIL is not null) then
     13             dbms_lob.writeappend(tlob, length(c1.EMAIL), c1.EMAIL);
     14         end if;
     15         tag :='';
     16         dbms_lob.writeappend(tlob, length(tag), tag);
     17         tag :='';
     18         dbms_lob.writeappend(tlob, length(tag), tag);
     19         if (c1.PHONE is not null) then
     20           phone := nvl(REGEXP_SUBSTR(c1.PHONE, '\d\d\d\d($|\s)'), ' ');
     21           dbms_lob.writeappend(tlob, length(phone), phone);
     22         end if;
     23         tag :='';
     24         dbms_lob.writeappend(tlob, length(tag), tag);
     25         tag :='';
     26         dbms_lob.writeappend(tlob, length(tag), tag);
     27         if (c1.FIRST_NAME is not null) then
     28           dbms_lob.writeappend(tlob, length(c1.FIRST_NAME), c1.FIRST_NAME);
     29           dbms_lob.writeappend(tlob, length(' '), ' ');
     30         end if;
     31         if (c1.MIDDLE_NAME is not null) then
     32           dbms_lob.writeappend(tlob, length(c1.MIDDLE_NAME), c1.MIDDLE_NAME);
     33           dbms_lob.writeappend(tlob, length(' '), ' ');
     34         end if;
     35         if (c1.LAST_NAME is not null) then
     36           dbms_lob.writeappend(tlob, length(c1.LAST_NAME), c1.LAST_NAME);
     37         end if;
     38         tag :='';
     39         dbms_lob.writeappend(tlob, length(tag), tag);
     40       end loop;
     41    end;
     42  /
    
    Procedure created.
    
    [email protected]_11gR2> show errors
    No errors.
    [email protected]_11gR2> begin
      2    ctx_ddl.create_preference('empuds', 'user_datastore');
      3    ctx_ddl.set_attribute('empuds', 'procedure', 'empuds_proc');
      4    ctx_ddl.set_attribute('empuds', 'output_type', 'CLOB');
      5  end;
      6  /
    
    PL/SQL procedure successfully completed.
    
    [email protected]_11gR2> begin
      2    ctx_ddl.create_section_group('namegroup', 'BASIC_SECTION_GROUP');
      3    ctx_ddl.add_ndata_section('namegroup', 'fullname', 'fullname');
      4    ctx_ddl.add_ndata_section('namegroup', 'phone', 'phone');
      5    ctx_ddl.add_ndata_section('namegroup', 'email', 'email');
      6  end;
      7  /
    
    PL/SQL procedure successfully completed.
    
    [email protected]_11gR2> begin
      2    ctx_thes.create_thesaurus ('nicknames');
      3    ctx_thes.create_relation ('nicknames', 'John', 'syn', 'Jon');
      4  end;
      5  /
    
    PL/SQL procedure successfully completed.
    
    [email protected]_11gR2>
    [email protected]_11gR2> -- added synonyms to thesaurus:
    [email protected]_11gR2> begin
      2    ctx_thes.create_relation ('nicknames', '&', 'syn', 'and');
      3    ctx_thes.create_relation ('nicknames', '&', 'syn', 'und');
      4  end;
      5  /
    
    PL/SQL procedure successfully completed.
    
    [email protected]_11gR2>
    [email protected]_11gR2> begin
      2       ctx_ddl.create_preference('NDATA_WL', 'BASIC_WORDLIST');
      3       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_ALTERNATE_SPELLING', 'FALSE');
      4       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_BASE_LETTER', 'TRUE');
      5       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_THESAURUS', 'NICKNAMES');
      6       ctx_ddl.set_attribute('NDATA_WL', 'NDATA_JOIN_PARTICLES',
      7        'de:di:la:da:el:del:qi:abd:los:la:dos:do:an:li:yi:yu:van:jon:un:sai:ben:al');
      8  end;
      9  /
    
    PL/SQL procedure successfully completed.
    
    [email protected]_11gR2> create index name_idx on emp (first_name)
      2  indextype is ctxsys.context
      3  parameters
      4    ('datastore  empuds
      5        section    group namegroup
      6        wordlist   ndata_wl');
    
    Index created.
    
    [email protected]_11gR2>
    [email protected]_11gR2> -- added function to format search string:
    [email protected]_11gR2> create or replace function format_string
      2    (p_string in varchar2)
      3    return varchar2
      4  as
      5    v_string     varchar2 (32767) := ' ' || p_string || ' ';
      6  begin
      7    -- add extra spaces around ampersand:
      8    v_string := replace (v_string, '&', ' & ');
      9    -- remove duplciate spaces:
     10    while instr (v_string, '  ') > 0
     11    loop
     12        v_string := replace (v_string, '  ', ' ');
     13    end loop;
     14    -- add { and } around each reserved word:
     15    for r in
     16        (select keyword,
     17             ' ' || keyword || ' ' keyword2
     18         from      v$reserved_words)
     19    loop
     20        v_string := replace (upper (v_string), r.keyword2, ' {' || r.keyword || '} ');
     21    end loop;
     22    return ltrim (rtrim (v_string));
     23  end format_string;
     24  /
    
    Function created.
    
    [email protected]_11gR2> show errors
    No errors.
    [email protected]_11gR2> -- example of usage of function:
    [email protected]_11gR2> select format_string ('B und V') from dual;
    
    FORMAT_STRING('BUNDV')
    --------------------------------------------------------------------------------
    B UND V
    
    1 row selected.
    
    [email protected]_11gR2>
    [email protected]_11gR2> -- query modified to apply foramt_string function to :name variable:
    [email protected]_11gR2> var name varchar2(80);
    [email protected]_11gR2> exec :name := 'B und V'
    
    PL/SQL procedure successfully completed.
    
    [email protected]_11gR2> column first_name  format a10
    [email protected]_11gR2> column middle_name format a11
    [email protected]_11gR2> column last_name   format a9
    [email protected]_11gR2> column phone          format a12
    [email protected]_11gR2> column email          format a22
    [email protected]_11gR2> select first_name, middle_name, last_name, phone, email, scr
      2  from   (select /*+ FIRST_ROWS */
      3                first_name, middle_name, last_name, phone, email, score(1) scr
      4            from   emp
      5            where  contains
      6                  (first_name,
      7                   'ndata (phone,'       || format_string (:name) || ') OR
      8                 ndata (email,'       || format_string (:name) || ') OR
      9                 ndata (fullname,' || format_string (:name) || ')',
     10                   1) > 0
     11            order  by score (1) desc)
     12  where  rownum <= 10;
    
    FIRST_NAME MIDDLE_NAME LAST_NAME PHONE        EMAIL                         SCR
    ---------- ----------- --------- ------------ ---------------------- ----------
    Jane       Doe         B & V     321-654-0987 [email protected]           97
    
    1 row selected.
    
    [email protected]_11gR2>
    
  • Re: Qosmio G30 - RAID of the problems when installing the OS

    I got my Qosmio G30-161 for half a year and he had thought should be time to reinstall everything, so I could get rid of things I didn't need (programs, viruses and uninteresting video clips).

    So I took my XP MCE Cd and tried to install, and I am guided me through and come to the place where I had to choose between unknown 1st and 2nd 3rd stripping mirrored. I chose the stripping as I wanted my drives to be in one. Then when I pressed "next" it gave me the error message "1005 - HDD is not ready?

    I tried to go into the BIOS and change the setting of different parameters of Toshiba told me to, but he also warned that if I changed my OS settings will need to be reinstalled. No problem. But I still get the same message error "disk is not ready?". So now, I have to use a computer other than mine to check the forums and mail etc.

    Anyone know what I need to do? I'll be happy with anything as long as I can have both my hard drives (60 + 60 GB) and OS work. :)

    Please help, I would urge for her, because the computer is the one I use for my school work. Feel free to ask questions about the tricks of the system. If you have an answer, please let it be simple, because I really don't want to mess up again ^_^

    Please check the details relating to the installation of RAID user's Guide.
    Usually if you use the clean Windows XP disk then you need to include the RAID drivers first.
    Without pre-installed RAID drivers HARD drive will not be recognized and you will not be able to install the OS!

  • Qosmio G30 - RAID may not reflect new 500 GB HARD drive

    I have installed 2 new identical 500 GB hard in my Qosmio G30 with Windows XP.

    The system works well, but the disc cannot be mirrored. Report of the Raid Controller is 'Normal Operation status.

    This disk cannot be used for mirroring because it is outside the management of the RAID."

    Who can tell me whether it is a disc error or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

    > Can anyone tell me if it of a disc error, or is the drive of 500 GB to big for the toshiba with Windows XP raid controller?

    Hmm. I m not very good, but it could be possible that the 500 GB HARD drive is too big for the mirroring of the mode.

    But have you tried to change the mode in comforter Toshiba RAID you might find in Toshiba Assist-> Protect Fix & -> RAID Console

    Check if you can switch to the mirroring.

    By the way; RAID-1 is defined in the BIOS?
    Usually, when you use RAID-1 configuration, the RAID is set to mirroring. In this case, the operating system recognizes the reduced ability to both hard drives (in your case, it is not important since you are using the two 500 GB HDD).

    Check it!

Maybe you are looking for

  • derivation or jelly iphone 5s by itunes or any unlocked how

    contact has expired. country bought carrier telstra australia that icloud locked and phone technical support has expired. How to unlock the iphone. imei ***************. NUM of series is c3 * rc7 < personal information under the direction of the host

  • In the web pages with a drop-down list, these have become visible to humans but invisible to my mouse

    The action click for example a country in the menu drop-down country to http://www.census.gov/population/international/data/idb/informationGateway.php has no effect on the list, but in fact, click on the screen of origin behind it. This is true for s

  • Need for a disk for Equium L100 186 recovery

    Hello I would be really grateful if anyone out there has a system for a Toshiba Satellite L100 186 recovery disk. Mine is lost and I'm trying to return the laptop back to factory settings. I realize that I can install vanilla XP instead, but I want t

  • Model 1011 wireless keyboard

    I tried to do a copy and paste using the keys "alt" and "print screen".  I use to be able to do this to copy from an application to a word document or in an e-mail and it doesn't seem to work.  How can I fix this.  Thank you!

  • HP Pavilion 20 - preparation auto repair

    My HP PAvilion 20 froze on me. I went to restart it and now it shows the HP symbol and it says "preparing auto repair." Then the screen becomes a blank black screen. Is there something I can do?


HashFlare