Qosmio G30 - white lines on the screen and BSOD

Similar Questions

• Qosmio F10: vertical lines on the screen

  I use a Qosmio F10 with a nVIDIA 128 MB graphics card. Recently while I was running a graphics-based application on, my screen started showing me wire colors on the screen. I was able to start the game once more, but found the same problem exist.

  On reboot, the system showed the vertical white lines on the screen to start qosmio, ' *' on the lines of the bios password screen and green on the Windows XP loading screen. I was not able to start Windows. Thinking it would be a problem of S/W, I formatted.

  The problem persists and I can not load Windows XP.
  Can someone tell me what the problem with my laptop?

  Hello

  This sound like a hardware malfunction and I guess it could be something wrong with the graphics card or motherboard :(

  But the vertical lines appear on the external screen? If so, then it must be a matter of Council.
  In this case, you have a lot of possibilities. In my opinion, ask the guy to service for the control of the laptop. The technicians of the service in your country partner could run diagnostics tests and will give you more details about the failure.

  Good luck

• Qosmio G30 pink pixels on the screen - what can I try next?

  I have a qosmio G30 on the white parts of the screen were pink pixel in them as well as purple pink pixels around parts.

  In reading the various posts, I have eliminated the graphics chip/card that I can get a perfect image on an external display. The laptop is out of warranty and also out of the extra year for graphics problems, so I tried to fix it myself. I tried all of the solutions below and none have worked.

  I wonder if anyone could give me any other things to try.

  I've updated the BIOS and the display driver - no change.
  I then replaced the motherboard to the LCD connection with a new cable - no change.

  And finally, I have replaced the LCD screen with a new - again no change.

  -Always works fine on an external monitor.

  Any ideas or suggestions would be very appreciated.

  Thank you very much

  Hello

  I think you're talking about dead pixels.
  Would this be possible?

  The problem of dead pixels has nothing to do with the graphics card but it s a display problem.
  So I was wondering why this problem persists after the LCD has been replaced

  Maybe a Toshiba laptop technician should verify and test parts of the hardware to make sure what part could be the problem exactly

• HDMI output on Qosmio G40 - horizontal line on the screen

  I connect my Qosmio G40 to an 46F86BDX of Samsung LCD via HDMI. On all my films, when there is a shift, I see a horizontal line on the screen. Sometimes is in the middle of the screen, sometimes lower.

  I tried my pc with another TV and a different cable, but the same problem. Someone knows the same thing?

  Thanx

  Hello

  > On all my films, when there is a shift, I see a horizontal line on the screen.

  If I understand issue you this horizontal line appears ONLY on and external TV and ONLY if there is some faster movements of the pic.

  If so, then I think it has nothing to do with G40 Notepad.
  I have read that those issues could be related to the new TVs LCD then to watch movies in high definition.

  I think you should read a few tests and reports on similar issues on LCD TVs

  See you soon

• Satellite A200 - 10 X - the white lines on the screen

  Hey

  I have a problem with my laptop, it's a Satellite A200-10 X, with Vista Home Premium and in recent weeks, my monitor has taken a turn for the worse.
  Well, there are these white lines from one side to the other, at the bottom of the screen and they keep up... rampant thanks to that O had to change my taskbar to the top as well.

  There, anyone have any idea what this is, and how it can be removed?

  I'm not a person tech-savy but I use my computer a lot for general purposes and I'm in the middle of a crisis, so if anyone can help, I'd be really grateful.

  PLSS...
  regs
  Nima

  Hello

  Have you plugged an external monitor to the laptop?
  I ask this question because at the moment it is not easy to tell if the monitor internal or the graphics card is causing this problem.

  If you can see the same question on an external monitor, it s the graphics card. If this isn't the case, you need to replace the internal display.

  An authorized service provider can help you get new spare parts and they can replace it for you.

  Good bye

• (Horizontal) white line across the screen

  Hello

  I have a student who has a white line through its screen (from top to bottom) anyone know if it's fixable. He said he intervened on his netbook. Fair enough.

  I know it might be a small crack in the screen. But I'm leaning toward a loose connection somewhere behind the screen maybe.

  I think that this should be provided by the system that we have in this school.

  But if anyone has come across this before? Usually, if it's a cracked screen there are scratches on the screen and you can't see a thing. It's different.

  The experince or ideas would be appreciated.

  Hello and welcome,

  Unfortunately... LCD screen which you electronic delicate not obvious a great split, the pressure that could be produced pixel small fine lines... 1 or 2 at first... .lines will get more after a given period of time isn't...

  to heal this... change the LCD...

  but aware... .the cost, when to change that in local service (sparepart & technician), could be about the price for a new Ideapad...

  cordially KalvinKlein

• Temporarily white lines on the screen

  Hello

  The last two days, I experienced some temporary white horizontal lines on the screen of my Macbook Pro.

  They appear for seconds, as a kind of static electricity in half top of the screen. Any suggestions for what this could be?

  I looked in this: http://www.apple.com/uk/support/macbookpro-videoissues/ but I it does not look like the pictures I've seen of this edition

  Thank you

  Bring the MBP to test in any case.  To do this is to your advantage.

  Ciao.

• Horizontal white line on the screen of the Satellite has

  Hello

  My white horizontal computer screen line recently appeared across the screen. Computer works normal, but I don't know how to solve this problem?
  What could be the reason?

  I'm afraid it's because of the defective m display.
  You can connect your laptop to an external display to see if the same thing will happen. If this isn't the case, it is the best evidence for my theory.

• White line on the screen

  Line of TVs, white on the screen

  Try the steps mentioned in the following article management to solve the problem.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41471

  If my post answered your question, please mark it as "acceptable Solution".

• Satellite P300 - vertical red and white lines on the screen

  Hello

  Red and small white vertical lines ' pixels may 2 each) are appearing on almost all of my screen. Sometimes, if the background is grey or white (for example a box on a web page), the display is normal on this particular area and the lines are everywhere around. This is the second time that this has happened. The last time, it disappeared after a few days. My computer is a Satellite P300.

  What can I do?

  Thanks for your help.

  I understand this correctly?
  This problem appears on all screens: internal and 2 display attached external monitor?

  Well, in my opinion, this means that the graphics card may be affected. :(

• Since the installation of version 4, on a 64-bit computer that is running Windows xp, I have a series of lines on the screen, and as I move the cursor, various parts of the screen are covered by black areas or colors randomly. Why?

  I gave you the basic information. My screen is messed up since I installed version 4. The location of the lines changes while I'm typing, or I change pages. And also the areas get blackened, as I move the cursor.

  Try turning off hardware acceleration. Click on the 'Tools' menu or the orange "Firefox" button, then select 'Options', go to 'Advanced' and uncheck the box next to "use hardware acceleration if available.

  If that solves the problem, it means that there is probably a bug in the graphics driver. Make sure that your Windows system is updated and the updates of your computer manufacturer driver.

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix when images don't open in 'developing', just a blue screen is visible with 2 thin white lines on the screen?

  If someone knows how to fix when images don't open in the editing to 'develop '? just a blue screen with white x through is visible.

  https://forums.Adobe.com/search.jspa?q=blue+screen&place=%2Fplaces%2F1383621&depth=all

• Hi, I just got a second generation ipod nano, and whenever I have unplug the charger a line crosses the screen. Help, please

  Hi, I just bought a used second generation ipod nano and whenever I have unplug the charger a line crosses the screen and I can't do anything with the ipod. Help, please.

  When you do a Reset (reboot) on the iPod

  Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

  do you see this line on the screen when the Apple logo?  If you do, it is probably a hardware problem.  If the line is not there at the start, but returns after the iPod starts, you can do a restore of the iPod using iTunes.  This d erases the IPO, reinstall its software and sets it to the default settings.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  If the problem persists after the restore, the cause is likely to be hardware problem.

• NVIDIA Display 6200 I have lines all over the screen and I can barely read what writing

  I have lines on the screen and I reading wrong with everyone writing have the same problem

   

  This is usually a sign that the video card is failing or the monitor is going bad. Have you tried another monitor or tried the card in another computer?