Qosmio G30E-190 - vertical lines on monitor

Similar Questions

• Qosmio G30: blue vertical lines and crash dump blue screen

  I have a Qosmio G30, model No. PQG32C-AV605E with BIOS Version 3.40.
  I want to update 3.90, but I can't get into Windows.

  How update the BIOS without windows available?
  Y at - it a utility BACK?

  If so, please send and I will download it or send me an email on where to download.
  The G30 that I has vertical lines blue on the screen when the computer starts in VGA mode entering into Windows for the first time.

  But the machine can not get into windows, it freezes and dumps and restarts before that.
  I replaced the RAM with new RAM, but it has no effect.

  I ran the diagnostics utility and hard drives are OPTIMAL in RAID 1, so no errors there.
  Reinstalling Windows went well: I can't do it in VGA mode without lines.

  Toshiba technical support told me that an upgrade of BIOS fix it.

  Thanks for any help.

  Hello

  have you tried to plug the external monitor? If it still shows blue vertical lines, the reason is a failure of the graphics card. (You can also reinstall Windows to check the related issue of f it's Os). Otherwise, contact the after-sales service.

• HP ENVY 15 t-j100 Quad Edition: red vertical lines in monitor

  Hello, one year I red vertical lines have appeared in my screen, sometimes they disappear if I move the monitor, but now they appear more frequently.

  What should I do?

  Hello:
  
  Looks like a problem with connection for cable screen or display materials.
  
  Do a hard reset and check again: http://support.hp.com/us-en/document/c01684768
  
  Is this vertical line while enter you the BIOS - press ESC or f10 as soon as you put it on and check.
  
  What about when it is connected to the external display?
  
  Concerning
  
  Visruth

• Qosmio G10 has vertical lines on the screen

  I have a G10 which I use for the last 15 months since I bought it.
  However, there are now 4 vertical lines on the screen, 2 Purple (magenta?), 1 yellow and 1 cyan. Other than these lines there are no other problems, it never fell down or something like that.

  The lines are still there, they do not change in any way and are always in the same place. They appear on the screen at first power up, before the Qosmio logo lights up.

  They have not all appear at the same time, they all appeared individually in the past two months. I've seen the last of them disappear briefly, then stay on.

  I guess that my screen is dying slowly, I guess to be an expensive item.

  Any advice thrown my way would be greatly appreciated!

  I took a picture of the screen you will find at:

  http://www.imagebucket.NET/images/lldata/displaylines.jpg

  Note: the photo was taken with Media Player full screen on a black image, just to clearly show the lines)

  Hello

  I suggest you connect an external display to check if it's a graphics card or a display problem. If cela pipes appears also on the external screen then it could also be a problem with the graphics card.
  If these lines do not appear on the external display while the display of the laptop has a malfunction.
  However, this does not change your situation. I recommend you contact the Toshiba ASP to solve this problem.

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• Green vertical line on monitor on Satellite A80

  I have a SA 80 127. Is it 1.5 years.
  Recently, a bright green vertical line appears on my monitor; Looks like a LCD issue.
  Does anyone have clues that I have to do?
  Thank you...

  Best
  knockaert

  To be 100% sure test with external monitor. If this line is displayed on LCD only you should contact the service in your country. If the display is faulty, it should be replaced.
  The warranty is still valid?

• Vertical lines on monitor

  In my office appears groups of vertical lines or bands, that someone once told me it's the defective LCD but I wonder how it can occur for its 1 year only when I bought this PC. You please give me some assistance?, thank you very much.

  Hello

  The screen is defective or the video connection cable is loose. Whatever it is, you will need a technician to fix it. Call the support of the manufacturer's warranty of your.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Vertical line on monitor

  Ago suddenly thin line yellow vertical from top to bottom and about two inches from the right side of my monitor S230HL. I disconnected the DVI cable and restart the monitor and the line is still there. I can't make this line go away. Any suggestions?

  Hi gmaple,

  If you have tried different cables and it's still there, it probably is a defect in the screen unfortunately. I suggest you contact your Acer support team so that they can help get it only addressed to you.

  Cory

• Blue vertical line on monitor

  There is a vertical blue line on my screen and it is not the monitor iteself. I believe that it is from the software. I tried to restore to the day without the line but nothing happened. I also tried to open and restore in safe mode, but again nothing. If anyone can help, please explain in detail. Thank you!

  Hello

  If the line is there in all modes, then we could indeed in the material of the monitor or a
  in the screen itself.

  Try to update or reinstall your video/display driver. Also check with the manufacturer of your system
  and the manufacturer of the device support and forums for known issues.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Vertical lines on the Qosmio G10

  My Qosmio G10 have vertical lines on the screen even on monitor external it show the same problems, tried to reformat using the supplied media center disc have the same problem also, system hangs when installing the video driver, try Booting to CD bootable always vertical BACK appear, I hope that the guys at Toshiba can give us a good explanation for this really upset by this problem our company buy 3 this G10 and two of the three have this problem.

  I put t know if you meet here someone of the Toshiba because this community is only a user to user forum, but I'll try to give you an opinion.
  It seems that there must be something wrong on the graphics card on the map.

  You don't have a lot of options... try to communicate with the service authorized in your country guys
  Probably they know something more about it

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• A vertical line on display on Qosmio G10

  Hello world

  Since yesterday I have a vertical line on my screen. He begins to show the start line and all the time. I already had the problem with the graphics card, so I had to replace the motherboard. Is this problem with the graphics card again?

  Hmm, I guess that Yes.
  You could try to connect the external display for the Qosmio, and check to see if the same on the second monitor.
  If the thin line will be visible on the external monitor, then everything looks like the graphics card failure.

• Tecra M3: black screen on startup, the vertical lines on the external monitor

  Hi all

  I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
  with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

  I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
  vertical lines in multiple colors. They change if I go to settings or you try to start windows.

  Does anyone have a solution to these problems?

  I have fear of solution can be given by the service only.
  In my view, this question must be tested properly.

  I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
  Here on the forum we can only speculate why this happen.

  As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
  Try to contact the nearest authorized Toshiba service and speak with the technician.

• Green vertical lines then white screen on Qosmio F10

  My Toshiba Qosmio F10 primer is more. When it is on, the windows logo appears and the screen green vertical lines before going completely blank. The screen remains blank for about 5 minutes, then the laptop starts to restart. It justs goes on and so forth.
  No one knows what the problem is and now the laptop is out of warranty, cost for repair, or it is not profitable and it would be cheaper to buy a new laptop?
  Thank you
  Mike.

  Hey Buddy,

  Unfortunately ' unfortunately it seems that this defect is caused by component defective equipment.» It could be that the motherboard together that cost to a service center about 400 European must be replaced. (New card mother and Exchange)
  You can also try to clean your cooling system with a can of compressed air to remove dust which could probably cause the error, also.

  If you really want to give your machine for repair, then follow this link and find nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Double vertical lines on the Qosmio G20

  I bought a 16mois g20 there and one day I tried to turn it on and gave me a few double vertical lines...
  I took it to the repair shop, they told me that I have to change the motherboard which is quite expensive and more installation wills cost much. So I think that... Why spend a lot of money for this laptop... .and know this thing came

  To be honest I wasn't disappointed with the machine worked very well... but reliability... .and its not so old to say...

  I was doing some research and very few have the same problem please... Toshiba should do something to make us upgrade the machine or get at least something cheaper to fix...
  Regarding.

  Fabian

  [Edited by: admin]

  Hello, Fabian

  I'm very sorry to hear that you have a problem with your Qosmio. I have too many Qosmio G20 and I really like this camera. I know it is expensive (I bought an opportunity), but it's really a very powerful and noble device.

  Right now my works well but when I read something like your ad that I'm a little worried mine too. I have gift? t know how long warranty period is in your country, but especially about 2 years ago. Try to contact the Service partner in your country and speak with them. Maybe is it possible to fix it.

  Good luck!