Qosmio G35-AV600 - what is chain to enter the BIOS for the creation of raid?

Hello

In the bios, you can configure the RAID on the two hard drives installed. I sent to 1-RAID0, but for "RUN CREATION" it asks me to enter a special string.

He claims that this is mentioned in the manual, but when I check the user guide it talking about the raid windows util or the recovery DVDs! (Frustrating!).

Nobody knows what this special string, it's that I need to enter so that the BIOS go ahead and create the raid array?

Unfortunately, the available online recovery cd is of no help.

Thanks for any help provided.

Advertisement

> Anyone know what this special string, it's that I need to enter so that the BIOS go ahead and create the raid array?

Qosmio G35 seems to be a series Toshiba US. I have not very well if this series uses the same string as the European model G30 Mr. anyway, according to the manual of the user that is stored on the G30, you must use this string: * 1 2 3 4 and then press ENTER. *
I would recommend this detour.

Best regards

Tags: Toshiba

Similar Questions

  • Qosmio G35-AV600: blue screen during the installation of Vista?

    Hello

    I have a G35-AV600 one I am trying to install windows vista.
    I followed all the instructions for the driver raid and all with pure install.

    But my problem is that, after the first reboot, I get a blue screen with an error message.

    I know that some people had the same problem since they were posted here but no solutions have been posted.
    Please if you have an idea how to solve this problem, help me, I'm desperate.

    Thank you.

    Hello

    We need more information to try to help you.

    As a first step:
    Have you upgraded your Qosmio G35 to be a Vista capable?

    BIOS available for download from the Toshiba Web Site:

    Version 3.30 25/01/2007
    Changed the BIOS to be compatible with Windows Vista.
    Added support for the digital tuner US OpenCable Unidirectional OCUR (Receiver). (Shut UP-PQG33U only).
    Additional requirements for Intel to improve stability when using the Intel Core 2 Duo as a single Core processor.
    FIX: A smart card containing a TI controller is always set to disabled.
    Fixed: Times wired / wireless LAN insured Wake-on-LAN functionality.
    Fixed: Ensure a remote to work Express Media Player.
    Fixed: Exclamation mark (!) appears when starting a model of TV tuner, while the RF switch matrix is turned OFF.
    Fixed: S3-wake question pertaining to the remote control mode. (Models Japan only with EC/KBC V1.10)
    It is the first version of BIOS for PQG33U models.
    This BIOS supports Windows Vista and XP.

    But my problem is that, after the first reboot, I get a blue screen with an error message.

    Would you please, let us know what is the error message when you have a blue screen?
    Report any information given at the bottom of the blue screen.

    Francisco

  • Qosmio G35-AV600: using Recovery CD I get partition not created error

    I recently ordered a recovery for my Qosmio G35-AV600 disc, because I started in safe mode to clear an alleged threat. Silly me! I forgot the password because I constantly use the fingerprint reader. Well, at the time where, that drives recovery came, I had remembered a password and access I.

    The thing is I always want to format the laptop, but I get partition not created not errors. Is it because the laptop hard drive has SATA or RAID capabilities, or because of the so-called Qosmio player. * If I could format the hard drive, I would not be able to use the laptop Qosmio mode? *

    I searched here and even contacted the customer service and have not found a definitive answer. Customer support's solution was to send to an authorized repair shop. My experience with computer repair shops, is that if the problem is not hardware related, they simply reformat the disks. I could do it myself if I could get help with this "partition has not created" or the partition not deleted"errors.

    Hello

    I agree with you and I also think that this has nothing to do with the hardware failure.
    But who knows, if you started the operating system in safe mode then we shouldn't exclude the hardware problem (IE. HARD DRIVE).

    However, the restore CD contains already all the drivers and you n t need to install SATA or RAID drivers.

    In my opinion, there are bad RAID settings in the BIOS!
    Please check the settings in the BIOS on the third page.

    If you know n t that mean simple settings, you open the user manual and check RAID chapter in the user manual.

    In addition, this could be useful:
    http://support.toshiba-tro.de/KB0/TSB6901K60006R01.htm

  • Need to update DMI for Qosmio G35-AV600 tool

    Hello world

    I have a Qosmio G35-av600 laptop. As I see in many subjects, I "* evil machine *" error when I want to use my recovery DVDs. I'm looking across the net, forums, everywhere and I couldn't not one any tool to update dmi for this computer.

    In this forum there are also topics related to that even there is a generic update dmi tool but it did not work. Anyone who has solved this problem? If the CD version exists, it would be better.
    * I really need this help! *

    Hello

    Have you tried to find it on Qosmio G35-AV600 Model Home page?

    CD version does not work for me.

  • Qosmio G35-AV600 - drivers & tools in German language?

    +++ Happy new year to you all.

    I am interested to buy the Qosmio G35-AV600 to the United States. I would like to change the keyboard in a German. Where can I find all the drivers and utility software in German language or German Qosmio laptop is compartible for G35-AV600? This laptop will be a gift for my sister and she doesn't know how to speak English very well. I like to set up the mobile world in the German language included in Windows XP.
    Who will be able to help me?

    Thanks & best regards,
    Marc

    Hello

    Everything you need you can find on the download page of Toshiba under http://eu.computers.toshiba-europe.com > support & downloads > Support home page.

    Only problem I can see there is TV tuner because it is a country and I am afraid it is not possible to use it in Europe (another standard TV). I'm also not sure how the WLAN card works because a user has reported that it has problems to the United Kingdom with American machine.

    I know that the units are less expensive in the United States but as Qosmio unit should be used with all the material and all the options. The Qosmio G30 series is great but it will be perhaps better to buy F30 in Germany and your sister will have no problems.

    Please do not include it as something negative, but that's just my opinion.

    Happy new year!!!

  • Qosmio G35 - AV600 the TV Tuner does not work in Argentina?

    I bought a Qosmio G35-AV600 in the United States and now I'm in Argentina. I connected the coaxial cable. I have to pay attention to color, but image is random on-site with squares colored all around him. Any suggestion on how to solve it?
    Thank you very much

    Hello

    I think that this problem is related to the NTSC / PAL settings.
    The TV tuner equipped in the notebook for a U.S. market supports only NTSC and this could be the cause of your problem.

    Here is a link to an article in Wikipedia on the PAL:
    http://en.Wikipedia.org/wiki/PAL

    There, I found this:
    + In Argentina, the PAL - Nc (combination N) variant is used. It employs the line field 625/50 per second waveform of PAL-B/G, D/K, H, I, but with a frequency of 3,582 MHz chroma subcarrier. +.

  • Qosmio G35-av600 - DVD - RAM problem

    Hello

    the drive from DVD-ram to my Qosmio G35-av600 died suddenly, he would not read something, so I went to come in and buy a replacement (the model is UJ-856-C), but when I changed the drive and starting the pc, I get an error saying error of CD-rom (I saw in another forum it takes with master-slave config), could someone please help me?

    Thank you very much, any help would be appreciated.

    I think you're an IDE #1 error message. Am I wrong?
    This error message is displayed due to bad settings master/slave/c-salt.

    The parameters of slim-line CD/DVD players is not editable using a jumper.
    The settings are controlled by the software, and to my knowledge it of not possible to change the settings.
    Therefore, not all CD/DVD drives are compatible!

    Before buy you a portable player, you must contact the authorized service provider and ask that compatible!

    Good bye

  • I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

    I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

    You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

    (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
    (2) save the remote assistance request computers
    (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
    RCTICKET = 65538,1,192.168.1.33:3389 «»
    with the public IP address from whatismyip.com or elsewhere - should be something like this:
    RCTICKET = 65538,1,74.125.47.147:3389 «»
    (4) save the file of RcBuddy.MsRcIncident 'new '.
    (5) double click it to connect to the computer needing help
    (6) cross your fingers and hope it works!

    I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

    -Computers Acorp
    www.ACoRP.net

  • Appropriate for DMI for Qosmio G35-AV600 information product name

    What is the name of correct product to fill the DMI, Qosmio G-35 AV600 to change information.

    I'm changing the information in utility of DMI.

    Thank you

    Gary

    I think that his:

    Qosmio G35

    or

    Qosmio G30

  • Default recovery CD does not recognize my Qosmio G35-AV600

    Hi, my problem is a little cranky...

    Portable model / type: G35 AV600 / Qosmio
    I have the original recovery CD

    I try to format it using recovery CD but I have the following message
    "This CD is not configured for your laptop. Its Qosmio G35 model'

    If I format using XP by booting from the CD i cannot load its drivers of default recovery CDs. Because it's not G35 type according to the default recovery CDs.
    OK I could download them from the web site official but model g35 is not defined in the selection of the support link table.

    any idea?

    Hello

    It seems strange that you get the message like this. I agree with Timox, just do a clean install of Windows Xp copy and then download all the drivers. And good luck!

    Welcome them

  • Qosmio G35 AV600 - need to update DMI utility

    I had the Dreded ' * bad Machine * ' message when you try to use the recovery cd that came with my Toshiba laptop. You mind I have successfully uses these CDs in the past. Of all of the post, I've seen so far, that I have concluded that I need to change the channel of DMI.

    Question: anyone knows where to find the utility of DMI for a G35 AV600 update? The sound I see on "Ask Iris online" all seem to be for other models? Can anyone help?

    Francisco is really the best expert Qosmio. ;)

  • Qosmio G35-av600: how to use the display internal as a monitor using composite-in?

    I want to connect my video gaming system and use my laptop screen, but I can't seem to understand how to change the settings so that my monitor displays the video game? Composite in the settings?

    I have a G35-av600 bought last June. If anyone has any suggestions, let me know

    Hello

    I don't know if I can help because I know something about the Qosmio G10 and the G20 and your Qosmio seems to be a mobile US but I will try my best ;) m

    Qosmio G10 for example, you must modify the input parameters in the Toshiba utility image of development, but I guess you don t have this tool pre-installed.

    But I think that the composite is a good Butler built the connection with the game station.
    I think that in the advanced graphics settings, you should be able to find the right options.

    Play around with the settings.

  • Qosmio G35 AV600 - Toshiba Controlls buttons do not work on Vista

    Hi, can someone help me with this.
    I'm testing Windows Vista on my G35 AV600, but my top buttons do not work.
    All my FN buttons are OK.

    Is there a driver I need to install?

    THX...

    Dan

    Hello

    Check http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp
    There you can find many things for Windows Vista.

  • Qosmio X 70-B-102 - how to enter the BIOS

    Greetings.

    Just a simple question. I think so.

    How in the BIOS of my laptop? Boils usually to press the Functionkey right (or combination of both) during the startup. My problem is that when I start my Qosmio, I don't see a message that tells me which key support. Can I be missing something (each time?), but I do not.

    I read the documentation that came with my laptop when I bought it, but couldn't find anything out there on how to enter the BIOS.

    Any info is greatly appreciated.

    Willem.

    Most of the settings can be modified from the Toshiba Control Panel utility, if you really need access the Bios here is the procedure on windows 8:
    http://www.eightforums.com/tutorials...ndows-8-a.html

  • Qosmio G35-AV600: where to get the recovery DVDs

    HY,

    I lost the Recovery DVD for my Qosmio AV600 and I would like to know how to get a new copy of them.

    Thank you.

    Hello

    The recovery DVDs can be ordered through authorized Service partner (ASP) in your country. If you are in the United States, all ASP information you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp > REPAIR CENTER > LOCATE a SERVICE CENTRE.

    Good bye

Maybe you are looking for