Qosmio G40: problems with webcam and start

Similar Questions

• 4 desire 1015dx: problem with webcam and microphone windows 10

  Hi all

  I bought a 4 craving and I upgraded to win10, webcam and microphone are not working now, it displays unknown device in Device Manager, I tried to install the drivers for win8 and win7, but it doesn't seem to work, I am trying to downgrade to win7 now, but it seems that I lost the recovery partition I tried to get from HP, but he told me to buy it for $49.99, what kind of support is.

  If anyone has a solution for this please help me with this (problem or demotion to windows7 webcam).

  Kind regards.

  Hello @November12,

  Welcome to the HP Forums!

  I read your message and understand that the webcam and MIC do not work on your HP Envy Ultrabook 4-1015dx. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in these documents:

  1. HP PC - Webcam troubleshooting (Windows, 10, 8)

  2 HP Notebook PC - test a Webcam using YouCam (Windows 10, 8, 7)

  3. HP PCs - troubleshoot microphone (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• Pavilion dv6 problem with webcam and microphone

  Hello
  I have a HP Pavilion dv6-6156ea, which is a little more than a month.  It runs Windows 7 Home Premium.
  Today, tried to use the webcam and microphone for the first time, a Skype call, but none of them does not seem to work.
  The webcam is not displayed in Device Manager, but the microphone is.
  When I opened Cyberlink Youcam, it does not recognize that there is an internal webcam.
  What should I do to activate the microphone and the cam?

  I followed the link below and follow the instructions.  But the webcam is not displayed in Device Manager.

  http://support.HP.com/us-en/document/c02452221

  Because is not find the device, I don't know how to update the drivers.

  I don't know how to solve the problem with the microphone.  I don't know if these things are likely to be associated.

  Any help appreciated

  Thank you

  Feel a little silly answering myself, but no one responded and I thought it is best to share what I found out.

  The webcam was defective, straight out of the box.

  And the microphone is connected to these features, but uses a different driver - if your microphone works, it could be a sign that your problem is with the driver for the cam.

  I bought the PC world a month ago, so there was although it is very busy.  It was the second faulty webcam in HP they had returned today - most early was a dv7.  There was no problem with replace - they took a glance, considered to be the installation of the drivers on a disc, but when it was not displayed in Device Manager and the microphone works not more, they knew right away.

  It really shows control of very poor quality of Hewlett-Packard.  It's a shame that in the first weeks, I was really happy with this model, but realistically, now I know that this is what looks like their QC, when my company needs its next piece I'll go with anything other than HP.

• Problems with webcam and microphone on the Satellite with Windows 7

  Hello
  I installed Windows 7 on my Toshiba Satellite and all of a sudden the webcam and the microphone does not work.
  I tried to find the appropriate drivers, but I can't seem to find.

  Could someone please help?

  Best regards
  Teresa

  Hello

  The webcam software is designed by Chicony.
  This model of laptop s independent and, therefore, the use of the webcam software that has been released for other models of laptops may not be a problem.

  I recommend you the driver for Toshiba Satellite L500 series area.
  There you can download the drivers for Win 7 32 bit and 64 bit OS.

  Welcome them

• problems with webcam and driver...?

  my laptop is dell core i3 model vostro 1540, there the camera problem, the result of the camera is black and white... I can't really know how to fix this problem... .and I found there's a driver named lexmark x 422 is not proceed with the installation correctly how fix me both issues? decline me as soon as possible...

  Hello

  Start a separate thread on the Lexmark driver that is your printer. Don't forget to register your
  Version of Windows and other information that we need us help to help you. Use the forum
  for your version of Windows.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  ===============================================================

  Don't forget to check with support from the manufacturer of your system, drivers, and documentation online and ask
  their forums (if any) where there would be others with the same model if a WebCam integrated or the
  Real WebCam manufacturer if a separate device. Links to the Dell Support below.

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Qosmio G40: Problem with BT DUN connection

  Hello

  I recently bought the new G40 and I try to use my iPaq HW6515 (with Windows Mobile 2003 SE) as a Bluetooth modem for her.

  The problem is that the express installation detects only the PAN profile. When I use the custom installer, he sees the profile of dial-up, but when I try to put the modem (by default at COM40, but he tried it on another one), it is said that there is no modem installed.

  After a few seconds, he set up the so-called Toshiba Software Modem (COM3), but after clicking on the button finish, he said still there is no modem installed on COM40. When I change the software Modem of Toshiba to COM40 he finished, but then when you try to dial the number is a message saying there is no signal dial.

  Now, I did this sort of thing for a while now with lots of batteries Bluetooth and it has always worked well. iPaq itself installed as a Bluetooth Modem Standard and number without any problems...

  The "Custom" Mode is set much lower. See the following Web site:
  http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
  to learn in detail how to set up.
  In your case, you should look at the following document:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"

• Qosmio G40 - problem with the use of 100% of the CPU

  In recent weeks I have problem like describbed here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126670𞻎

  Almost the same thing - my computer starts and works ok, but from time to time is frozen by Symantec Service Framwork and all other descriptions are the same.

  "After having been inactive during these seconds, the cooling fan will start to operate at maximum power, creating a huge noise, that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs." Force a reboot is all what I can do. »

  Almost all accidents that this question was by NIS2008, but also Vista explorer.exe and fingerprinttray service or the service of the Index process.

  I received a notice from the team of NIS that I get to use the new NIS09, and for sure that my machine is damaged - check it out here http://community.norton.com/norton/board/message?board.id=nis_feedback&message.id=6964&quer y.id = 22439 #M6964

  I called the Service, which has changed the ATV and CPU - I changed to NIS09 after, a few weeks was good, but now the problem back - in the last two weeks twice. (I observe that starts about 5 minutes after download of updates to NIS (I know cos NIS 09 indicator of that time).)

  One change - Vista is able to kill that process damaged (Admins have no right to do), starts the process of WeAreFault, which sends information on crash for MS - after about 15 min computer starts to work properly without reboot... so I think that a problem is somwhere on the line between Toshiba and Norton, cos repair also change in behaviour of the machine - is now using work not CPU around 20% - before was 50 to 70% and 100% of crash. Norton is also, but must for this.

  Does anyone have a conclusion?

  Generally, I don't like Norton because he needs as many resources and make the laptop lazy. On the net, you can find very good alternative applications.
  Have you tested how the laptop works after removing the NIS?

• I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

  I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• PROBLEM WITH WEBCAM INSPIRON N4010

  Hello

  My laptop inspiron and a half two years old is having problems with webcam.

  The operating system can't detect the webcam. (Missing from Device Manager imaging devices). Of all the posts, I tried the following:

  I ran the diagnostics of webcam (result: there is no device)

  Updated the Dell webcam central software (displays the message: Plugin a device supported)

  I tired the USB mouse thing. did not work.

  I opened the window to check the webcam pcb and connections and everything seems to be intact.

  I restored my PC to factory settings but the webcam is not started.

  Tried to install the drivers, System Utilities, Chipset and Bios in the order given... but no help.

  I intend to get an external webcam as a last resort to check if it works.

  Any help is appreciated for this problem.

  Kind regards

  Christine

  If you have re-installed your drivers and software and continue to receive indications that your built-in webcam is not connected, you will have a bad connection to the camera.  It's actually very easy to fix on a N4010, especially compared to the aggravation of the re-installation of software, etc.  Carefully lift the bezel around the screen.  Start on the left side by gently sliding your finger between the screen and the plastic you will hear clicks as it separates.  Work your way at the top, to the bottom of the slide to the right and down.  I found the corners a little stubborn, but do the sides front corners made it easy.  Be very careful around the hinges at the bottom, but it comes off.  Don't rush and do not pull more inch of the screen.  (If you use a search engine to search for "remove screen Inspiron N4010", it is an excellent video on it.)  (If you have webcam central open, your camera may come alive as soon as you lift the bezel on.) Once the bezel is disabled, you will see the camera at the top, with a small white connector on the right side of the lens. You'll hardly notice, but it's actually two parts of a connector, the male part below the part female, coming behind the screen.  I used a small flat screwdriver to push upward on the lower part, male connector, a gap of less than 1/32 ".  This solves the problem.

• Problem with IMovie and Quick time

  Hey everybody,

  I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  Could someone please help me solve this problem?

  Thank you very much in advance.

  Concerning

  Could someone please help me solve this problem?

  Not only based on what you already said.

  I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

  How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

  I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

  The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

  Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

  As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  

• Problem with webcam not fixed with Vista SP1 on Portege M700

  The Vista SP1 does nothing to the failure of Vista to recognize the built-in webcam Portege M700.
  The existing forum thread mark this question as a response, despite the link to the document toshiba mentioning the error messages entirely different from those cited by those of us with problems

  I find it strange that the M700 UK wouldn't have a built in webcam; is it really true?

  Hello

  I noticed a problem with webcam in time early Vista release, but it was linked to the Vista OS stroller and was solved by SP1.

  Sorry, but another problem with webcam into the unknown for me and as far as I know internal webcam works fine also on Portege M700.

  As you already suggested the internal webcam is not available on all Portégé M700 series. Toshiba notebooks, any series, are equipped with different hardware specifications and example to the webcam internal, in the light of the webcam and internal microphone are available on some models.

  Maybe no problem with a webcam, but some Portégé M700 does not really have an internal webcam ;)

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Problems with WebCam? YouCam allows to test your WebCam

  Software using YouCam to solve your Notesbook WebCam problems

  Problems with your computers webcam portable? You can use the YouCam software to solve problems with your webcam. It was really only a few questions, which can cause problems with webcam. Driver problems, bad video configuration and software issues. YouCam will be able to identify these two problems for you.

  Troubleshooting with YouCam

  
  First you want to make sure that all other applications are closed. Other applications can steal the priority of the YouCam software that could interrupt the troubleshooting. Then open the YouCam software. If there are problems with the WebCam, you will be alerted with an error message here.

   

  "Unable to connect to the video device" error:

  Hope this helps to solve many problems of webcam. Again, this is an informational message that should serve as a reference. If you have gone over these steps and are still problems please create a new thread and include your computer model, operating system, and any other information that would be helpful in resolving the issue.
  
  Thank you!
  Sean S

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.