Qosmio G40 - second HDD not visible for the facilities WXP CD

Similar Questions

• Installing WXP - HDD not visible on the Satellite A200-1N1

  I have Satellite A200-1N1 and I need to install Windows XP, but when I boot from the CD for installation, back windows do not detect any hard disk and it will ask to press F3 to exit.

  Can someone help me?

  On this forum, you can find so many comments about it. All you need to do is check the Satellite section or use the search option.

  A very interesting thread on this, you can find here.

• Some keys on my Qosmio G40-10 do not work

  Hello

  Some keys (y h and 6) on my Qosmio G40-10 do not work for some unknown reason and I'll have to use the keyboard for on-screen typing.
  I bought my laptop at pcworld.co.uk while I was in the United Kingdom, but now I'm in Mauritius (Africa).

  I have still 1 year international warranty. But there is no direct toshiba manufacturer in Mauritius. I find a few representatives of service provider for my country, on the toshiba site and gave them a call, but they are not prepared to recognize the warranty. Is this possible?
  I don't really know what to do. Suggestions are very much appreciated.
  Thank you
  Van

  Post edited by: ADMIN

  Hello

  With regard to the question of the keys;
  I think there is something wrong with the keyboard and this part need to be replaced.

  I found the links on Toshiba UK support Web site:
  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=SUPPORT_PORTAL

  [Toshiba warranty Lookup | http://computers2.toshiba.co.uk/toshiba/formsv3.nsf/WarrantyEntitlementLookup?OpenForm]
  There you can enter the serial number of Toshiba to know the expiry date of your machine warranty

  You should also consult the [organize a warranty repair | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=UK&ID=WR] link.

  Detected, I found this info: _
  + Now the reservation guarantee repair system live Toshiba only can arrange repairs and collections for notebook computers, located inside the United Kingdom. If you are located outside the United Kingdom please contact your local Toshiba representative or visit the Toshiba authorized Service Provider Locator global to http://pcrepair.toshiba.com.+

  Good luck and best regards

• Hi - I'm looking for the correction Adobe Illustrator 2014 1.2 update (ou.0.2) for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only visible update is Illustrator CC 20141 - that is what introduced bugs.

  Hi - I'm looking for the correction Adobe Illustrator 2014 1.2 update (ou.0.2) for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only visible update is Illustrator CC 20141 - that is what introduced bugs.

  The only thing I can think that may cause the problems I have a Mac Mini on the Mavericks.

  Dave

  Hello

  I discovered that my question above is a non issue. A user has triggered by watching the below article on Illustrator 2014 17.0.2 cc

  http://helpx.Adobe.com/Illustrator/release-note/Illustrator-17-0-2-release-notes.html

  He had recently improved to wht, we know now is 18.0 to 18.1, which is the latest version. He has read the foregoing artic

  the and assumed that it was a version of fixed a bug for its version - as the number of ov18 v17 is not displayed. It is usually just 2014 CC.

  I asked him to post a bug report on Adobe Illustrator CC 20141

  Dave

• Qosmio G40 - infrared chipset not detected by Windows 7

  I upgraded to Windows 7 from Vista and found that my infrared chipset (SMSC SIO1049 SuperIO chip) does not appear in Device Manager.
  According to this page, it should appear as an unknown driver (ACPI\SMCB0C0)
  http://msdn.Microsoft.com/en-us/library/dd567986.aspx

  The IR remote control provided by Toshiba does not work (it used to work fine under Vista). All the world had the same problem B4? How to fix you (if you resolved at all)?

  Does this mean that Ineed to wait for the next update of the BIOS (my BIOS version is 2.20)?

  My computer is a Qosmio G40 PQG40 02201NCE.

  Hello

  If the device is not visible in the Device Manager, not even as an unknown device, then this means that the device does not exist or was not detected by the BIOS.

  Usually, the infrared receiver must be visible in the Device Manager under:
  Human interface devices - > infrared receiver SMSCIR

  In system devices, you should see the device consumer infrared.

  Don't forget that you have enabled devices hidden sow option perhaps of Device Manager, then you might see this

  Please also check the BIOS
  I'm not very well if the infrared device option would be listed in the BIOS, but you should check it m

• Comments on CNET articles are not visible in the x 64 every night

  If you open any page of the CNET article for example URL below, there is a bar with a 'Comments' button and a few other links Twitter/Facebook/etc.

  http://News.CNET.com/8301-11128_3-57342036-54/Volvo-plug-in-diesel-hybrid-races-into-Europe/

  This bar is not visible from the x 64 Nightly build, even with all extensions disabled. It is visible that if I start Firefox in Mode safe.

  I find it strange because apparently it is disable the extensions I've already done manually and turn off any custom parameter and the theme that I don't have.

  Looks like a bug on the side of Firefox, as the same page works fine in IE and Chrome, and, as I remember, in the 32 official output x. Any idea?

  I see the same thing with the current 32-bit Nightly build on Linux.
  
  Looks like a problem with the JIT compiler.

  It works if I set javascript.options.methodjit.content to false.

  A good place to discuss problems with Firefox nightly builds and Firefox beta builds is the forum mozillaZine Firefox builds.
  
  There is also a thread every day to discuss problems with the last Nightly build on the build from mozillaZine forum.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=23

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• computer Vista Home network is not visible from the XP computers

  I have a home network with 4 computers. Both run Windows XP, Windows Vista is running and
  It works in Windows 7. Each group can see all the others and can access shared files and printers
  with one exception. Vista computer is not visible from the XP computers. It is visible from
  the Windows 7 computer. I guess that there is a setting somewhere on the Vista machine
  That I need to change, but I'm not.

  Thank you.

  David

  Hello

  see Help for these links if

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing

• Operations are not visible in the viewport in the develop module only in the browser window.

  1.I have a very strange problem with Lightroom 6.5 and earlier versions had some of the problems (so little reliable, because I don't know what time it will happen again) Lightroom if I work after a while, the following occurs: in the large screen of the applied rendering operations are not visible, only the small window of browser. In the middle of the screen is NOTHING done, so I continued to work on the image in the window of exploitation and not the image disappears, just a gray window remains above. Dan I switch to another view and then be visible again (but operations also do not appear this, only in small browser window displays the changes applied) I have to restart your PC for vouchers, which sometimes does not occur when you restart. Function the GPU turned power off.

  2. at this moment, there is a new problem starting.

  Lightroom begins only with color boxes in the grid, no image is visible

  
  

  My system configuration: Windows 7, 64-bit Intel Core i7 - 3770 k CPU 3.50 GHz 16.0 GB RAM ATI RADEON 4800 series

  This could be caused by a defective monitor profile.

  As a diagnosis too, l and, possibly, a temporary solution, try to set the monitor to sRGB profile.

  If this solves the problem, you need to calibrate the monitor with a standard material.

  This will create a new profile that accurately describes your monitor.

  Press the Windows key + R, type colorcpl, and then press ENTER.

  Add the sRGB profile, and then set as default profile.

  

• connect with vm via VMRC console is not visible in the self-service portal

  Even after providing the actions required, I do not get this option "connect with vm via VMRC console is not visible in the self-service portal. Anyone who can help me in this?

  https://www.VMware.com/support/Vcac/doc/vrealize-automation-62-release-notes.html

  
  

  6.2 additional:
  

  VMware Remote Console (VMRC) is disabled for vSphere machines *.

  Action connect using VMRC for vSphere machines has been deleted due to a security breach. Access remote console for machines provided by vCloud Director is not affected. For more details on this topic, see VMSA-2014-0013.

  
  

  Thank you

  Kumaran
  

• Services tab is not visible on the screen of people

  Services tab is not visible on the screen of people.
  For some business groups, it is visible to some business groups that he is not.
  Is there something wrong set up?
  
  Thank you
  Archana
  
  Published by: archana. N July 28, 2012 15:21

  Search for MOS Doc 341238.1

  Here's the direct link - https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?id=341238.1&type=DOCUMENT&displayIndex=1

  HTH
  Srini

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• My Hotspot is not visible in the settings

  I update my iPhone to iOS 9.3 6s my hotspot is not visible in the parameter I update my iPhone of many other iOS version 9.3.1 to 9.3.3 and 9.3.4 9.3.2,and need help.

  Hello

  To configure Personal Hotspot, follow the instructions here:

  • Share your Internet connection with Personal Hotspot - Apple Support

  To help to solve problems with your hotspot, follow the steps detailed here:

  • Get help with Personal Hotspot iOS - Apple Support

• Report not visible in the address bar icon have installed the latest version, works with Safari.

  Icon not visible in the browser bar Firefox 40.0 report. Report of uninstalled, installed report 3.6.1507.14; restart the Mac under OS X 10.10.4 Yosemite. Still no report icon. Report NB icon present in Safari 8.0.7 and extras Menu.

  I'm not entirely sure about the feature you request on the subject, but here's what I could find:

  • http://www.Trusteer.com/rapport-icon-not-showing
  • http://www.Trusteer.com/support/how-can-i-tell-rapport-working and support: http://www.trusteer.com/support/submit-ticket