Qosmio G50 - 12U - display stops when 'Welcome' appears

Display U Qosmio G50-12 problem

When I start the computer (Windows Vista) start page shows Qosmio and the boot process proceeds, but around when the welcome message the display panel stops.

When I connect an HDMI cable between the computer and the TV, the display on the TV.

When I hit FN + F5, the display fails to return to the display of the computer Panel.

If I stop and restart the computer several times the m slipped by pot luck the computer display OK. But then, I am reluctant to shut down the computer that I lose the display again.

Hello

It seems that the internal display has started to malfunction.
I think that its display problem, because the video output to an external monitor/TV is working properly.
This would mean that the graphics card is OK.

If the graphics chip is OK, there is just a game (or two) that might not work: his Billboard or a part between the monitor and the motherboard. something like a cable or an FL inverter, but I think that its display.

Tags: Toshiba

Similar Questions

  • Re: Low Microphone on the Qosmio G50 - 12U

    Hello

    I have "Qosmio G50 - 12U" laptop and everything is perfect, except the microphone.
    When I try to communicate with the people of "SkyPe" and I don't want to use a headset, I have to be very close to my monitor in order on the other side to hear me.
    When I talk using built in mic for some people who use e.g. "Toshiba Satellite L675" they can stand 5 meters away from their laptop and I can hear them very good and very strong. I have to be very close to my microphone, otherwise they will not hear me.

    I checked all the settings and have drivers 'Realtek Semiconductor"08.24.2009 6.0.1.6923 driver version

    When I use headphones, the sound is perfect on the other side.

    I also checked in the Configuration of the web camera. Everything seems normal.

    I suspect:
    -"SkyPe".
    -drivers
    -material

    I can't believe that this a good laptop has to a bad such microphone...

    Anyone has any advice?
    Thank you

    Bad microphone isn't the right term, low perhaps. ;)

    Did you check the audio settings in Skype?
    Is the micro then put to maximum level?

    For example, I have brand new Satellite P500 and with headphones Skype works perfectly but with internal mic use other side cannot hear me so well. Another way some people can't hear me clearly even when I use a headset.

    Is perhaps also responsible for Skype connectivity of audio quality.

  • Qosmio X 770-music stops when my TV shuts

    Hello!

    Okay, this sounds very strange, but I noticed that whenever I stop my TV (LG 42LD450) music on my laptop stops. At first, I thought it was the remote control, but it also stops when I stopped the TV by pressing the button on the TV itself. So I guess TV sends some infrared type signal to signal other devices it was off.
    It doesn't matter what software I use to play my music. All software supporting the play/pause button above the keyboard responds to TV by running a + stop + signal (not + pause / play, but + stop +).

    I looked in my control panel (Win 7 Home Premium x 64) for any infrared option, but I have not found anything.

    Then. does anyone know how I could prevent this behavior, without turning off the infrared feature for the NVidea 3D glasses? I don't like for other infrared features, but I need to use the 3D glasses, which are connected by infrared.

    Thanks to words,
    Tenac

    lol: P emp shockwave :D

  • Qosmio F60 - USB ports stopped when I'm with them

    H ? !

    I have a problem on my Qosmio F60. I opened my computer after 30 or 40 minutes firstly, 2nd and 3rd usb ports stopped after 5 minutes 1 usb port stopped and I can't use them. When I started my active computer, usb ports and they start working.

    I checked my power plans and no problem with them. I think that the heat of my computer too well maybe, I'm not good. Can help you me with the usb ports on my computer. Show

    Hey,.

    I put t think that the problem is related to overheating. If the USB ports stop working I think that it s a software or driver problem

    In your case I would remove all the USB ports on the Device Manager and restart your computer. The ports will be recognized again, and then test you its operation.

  • Qosmio g50 screen does not

    I have a Qosmio G50. This morning when I turned on the screen has come for a second or two, has shown the Qosmio logo, then deleted. I spent the morning trying to solve the problems. I removed the bezel and checked that the sons were not cowards.
    I've attached another screen of the laptop that works fine.

    Sometimes the screen, so I don't think that the problem is the screen itself.
    It will be displayed for about a second if I close the lid, and then open it. He will then blink for a second and then drain.

    Also sometimes if I start with the other attached screen, the laptop display indefinitely.

    Anyone have any ideas? It might be the button that turns the screen on and off when the laptop opens / is close, but I don't know where to check.

    PS: The filter of profanity on this forum is total garbage. As if I was not quite frustrated without having to cut and paste my post paragraphs trying to isolate a few expletives ghost.

    Post edited by: redbrigade

    I have the same problem with my G50. According to me, if I have the brightness of the screen under level 5, there is no problem.

  • How to install "FM100 YUAN" on the Qosmio G50

    I recently bought a new Toshiba Qosmio G50 laptop.

    When you first start up Windows keeps giving me a message saying "Windows needs to install driver software for your YUAN FM100".
    Google suggests YUAN is the company that makes the TV Tuner software - I sent to their support center a couple of weeks, but did not respond.

    I can't find the driver anywhere - I spent ages Googling that.

    I'm under 64-bit Windows Vista, if it's relevant?
    In "Device Manager" under "other devices" Qosmio G50 appears twice, both with the yellow exclamation warning.

    Can I disable these two?

    Thanks in advance for any help you can give - just answer using words that would include a child of 3 years!

    Thank you

    Steve

    Hello Steve

    Can you please tell me where you bought your Qosmio? You have a European model?

  • Qosmio G50-10 q - driver has stopped responding and has recovered

    My father has a Qosmio g50-10 q for more than a year, and as he bought it he could not see the videos with a resolution more than 640 * 480 and preview of the photos by right click on them and select Preview.

    The problem exists on the operating system preinstalled Vista and today Ive tried to install an operating system windows 7 Professional 32-bit edition.
    The problem is he stil.

    I downloaded the drivers from the official website of toshiba.
    After a lot of testing, I downloaded nvidia nvidia drivers but the problem is exactly the same.
    I am a COMPUTER expert, but I've never found a problem not solved like this.

    I can not even go on youtube and watch a video in full screen.
    Whenever I try to play a video, the screen will start to Flash and then the video becomes black and a notification that says "display driver stopped responding and has recovered".

    I can't even see the video demo in the video folder of windows (wild life).
    And the situation really strange when I click with the right button on an image and select Preview. It shows a white or a black image.

    If I press the button of the screen adjustment, the image appears, but when I go to the next pixture I can't see him again.
    If I choose to see a presentation full screen, I can see all normally.
    Its really frustrating for a laptop of this award and I don't know if this problem is drivers or the 9700 M GTS was defective from the start.

    I hope I can find an answer here before I return it to Toshiba

    Thanks in advance

    Hi mate

    I had the same error happened on my laptop satellite.
    The display driver crashed and recovered
    I've updated the display driver and this has solved my problem.

    In your case, it of really strange that you can not watch movies in 640 * 480 or higher
    Maybe you need to update the BIOS. Check if there is a newer version
    If so, then an update of the BIOS would be worth a try

    Sorry, but I have no other recommendation for you outside the update driver as mentioned it has helped in my case

  • Qosmio G50 - 10 h - strange display problems

    My Qosmio G50 ran less bright for a few months, then experienced intermittent fault by which logo Qosmio would display on the screen, then on the logo of windows for a fraction of a second, then the screen would be completely obscure. Restart or hit f5 function could resolve the situation. The problem became permanent. I can't get the screen works otherwise that to show the qosmio logo, a little of the windows startup, then blackout.

    I've lived the maintenance manual and options are ups? The screen? fluoro? Map of the system? That is the question... Without all the spare parts, it is difficult to determine what is the cause... I have a UPS on order, but they sent two bad parts and finally arrival right I don't know who's going to cure the problems

    Really need to use the computer. Your thoughts and help will be greatly appreciated

    Kind regards

    Simon Riley
    (ironysmile)

    You are right: it is not easy to tell what can be the problem. We can only speculate what part may be defective.
    Just one question: when you start the laptop and try to enter the BIOS settings you see anything on the screen? When you leave for awhile is screen after only a few seconds black too?

    You try to start Windows in SafeMode (F8 at startup)?

  • How to stop messages that appear on the screen locked when they arrive?

    How to stop messages that appear on the screen locked when they arrive?

    Settings > Notifications > Messages > turn off display on the lock screen. -AJ

  • Qosmio G50 - 10 t - when Win 7 64 bit drivers would be released?

    When drivers (windows 7 x 64) for the Qosmio G50-10 t!
    Such that - Value Added Package. !!

    Hello

    I m not sure when Toshiba would release these drivers, but I think it's going to happen after that Windows 7 is released and published.
    Currently, you can find the version of beta (RC) on the market.

    PS: I found some Beta Win 7 drivers Toshiba page:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  • Qosmio G30-204 PQG32E hangs when you install the display driver

    Hello

    I have a PG32E Qosimo G30-204 age of two weeks.

    He has recently developed a graphical corruption as horizontal lines of thing that resemble lines of memory corruption. These either go away or reformed in another location when you scroll or move the page.

    The installed display driver version is 7.15.10.9759 and there is a newer version on the download page.

    Tried to install it twice and both times the machine froze during installation in a case goes blank after a refresh. In order to proceed was to remove the power and the battery from the machine. Then looking at Details of the driver after restart a normal life, even if the version number has changed the machine freezes at some point later, sometimes looking at the details of the driver or by opening a browser etc...

    In both cases I had to go to safe mode and use back driver to make the machine can be used (but always with graphics issues).

    Any suggestions?

    It is possible that the graph of problems occur only after the machine has been for a while, but again when they appear does not remove them.

    Leave the machine off for awhile remove them because they do not produce all the time so maybe an overheating problem?

    Kind regards

    Andy

    Hello

    I assume you mean the graphics driver for Vista. Am I wrong?
    I visited the site driver Tosh and compared to the Vista nVidia Driver version and surprise, surprise, there is a more recent version published on 23/04/07 and the version is 7.15.10.9813.

    Check this driver

  • When I connect with AOL9.7 the windlw of welcome appears, but I can't get my mail.

    Problems with getting mail

    I have windows XP. I downloaded AOL9.7.  When I connect with AOL9.7 the windlw of welcome appears, but I can't get my mail. The window to welcome says I'm not connected and click here. When I click on the message I get my mail. Why don't I have to sign in twice?  any help is appreciated, thanks.  .

    You should check with the support of AOL.  It is a forum for Windows.

    Good luck.

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • I have my InDesign CS6 software crashes when the display of the Welcome screen.

    I have my InDesign CS6 software crashes when the display of the Welcome screen.

    Have you tried to restore your InDesign preferences?

    Garbage, replace, reset or restore the application's preferences

  • Qosmio F10 stops when I touch

    Hello world

    Since yesterday I have a problem with my F10.
    It is quite paranormal, so I give you the facts.
    -l' computer stops when I touch (when I close the screen, or touch down on the left)
    -After that, power light movies with this schema:
    1 long (white) 6 (white) shorts and 1 long x
    -to shut up again, I have to remove the battery and power, wait a bit, and it can be silent again.
    I have no software, no update, and it looks like a motherboard problem...
    Naturally, it is not under warranty more...
    So, if you have answers!
    Thank you to
    Eric

    Hi Eric

    If the DC In lamp sends a blink code it is probably a problem of electronic supply on the main map. Unfortunately, there is nothing to see. You must contact the partner of service authorized in your country.

    Good luck!

Maybe you are looking for