Qosmio G50 does not detect the connected Bluetooth devices

The qosmio g 50 (windows vista ultimate) detects more devices via bluetooth
Until two days ago, I pointed out quietly via bluetooth mouse. And then, do not know what is success does not detect any more.

I did a test to see if it could depend on the PC or the mouse.

I took the phone with bluetooth, I turned and qosmio, is not detect the phone.
And the phone does not detect the qosmio via bluetooth.

What checks can I make on the qosmio while ' I detect devices via bluetooth?

Tank you

Hello

BT has been successfully activated on tis G50?
Have you used the FN + F8 key secret to switch on the BlueTooth?

Please check if the FN key works correctly, otherwise, go to the button start-> all programs-> Toshiba-> Flash Cards Support utility and restart the software.

Tags: Toshiba

Similar Questions

  • Windows 7 does not detect the GPS Garmin device.

    Original title: the hardware detection.

    I recently bought a Garmin GPS.  I can not get my PC running windows 7 to detect it.  Fortunately, I still have my old machine with XP and it recognizes.  How can I get my new machine to detect.  I down loaded new drivers from Garmin website, but nothing helped.  My old machine ran to 64-bit the more recent short 128 bit if it's any help

    My Magellan 5236 T wouldn't connect to Win 7 Premium. Began to look for someone with XP. Duhh!
    And that's this worked on my Compaq Mini Win 7 Starter Edition (in french!).
    Go figure. There are 32 bit vs 64.  It may be useful

  • Qosmio F10: Driver Installation does not detect the wireless network card

    I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

    Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

    I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

    I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

    I still don't the card wireless not yet installed. This happened to someone else?

    I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

    Thank you very much

    Sean

    Hello

    you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

    Sorry I have no other idea.

    Good bye

  • Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

    My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

    My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
    When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
    I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
    Is anyone familiar with this problem and could you please help or at least point me in the right direction?
    In addition, please let me know if you need any other information on the problem.
    Thank you
    Lily

    Hello

    Try the steps from the following link

    http://support.Microsoft.com/default.aspx/KB/956196

  • Does not detect the hdmi cable more (very specific scenario)

    Well then...

    Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

    So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

    Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

    Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

    The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

    During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

    Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

    Hello Kaida W,.

    Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

    Reset the management system (SCM) controller on your Mac.

    Try it and tell us how it goes. The entire community is here to help.

    Best regards-

  • Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

    Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

    What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

    What model number is the most convenient airport?

    Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

    In addition, not all drives are recognized.

    The internal drive of the TC must be recognized, but there could be problems as well according to the age.

  • Windows xp64 does not detect the printer hp laserjet p1102

    Hello

    Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

    Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

    Hello

    I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

  • Computer does not detect the pci card

    Hello
    I have a dell dimension 4550 pc, with windows xp professional service pack 3.

    I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

    What can I do to make the computer detect the new card?

    Thank you

    It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!

  • The remote device or resource does not accept the connection

    I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

    Hello Kyle,.

    Your computer is connected to a domain network?

    If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

    Forums TechNet for Windows 7
    http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Otherwise, try to follow the following suggestions to solve the problem.

    "Internet Explorer cannot display the webpage" error

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

    Also refer to:

    The remote device or resource does not accept the connection

    I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

    Thank you

  • HP Support Assistant on my laptop or desktop does not detect the other machine.

    HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

    @bmedbury

    The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • PCMCIA card does not recognize the connection to the local network on Satellite Pro 4340

    Hello world

    I have 2 Satellite Pro 4340, running Win2K, SP4. I bought a card PCMCIA 10 / 100MB of Ultron (more or less no name :-))

    When you insert the card, Win2k recognizes the card, but when the I plug the network cable, it does not recognize the connection. Cable is fine. It seems there is no power on the PCMCIA card. I read on some forums that there is a problem with the Topic100 Card Bus driver and voltage. I see that many people have the problem but not where to find the driver for the problem :-/ I couldn't find a driver on toshiba support site. A

    ll have an idea, or better a link where I can download this driver? Any help is appreciated and thanks in advance for your help, support and answers.
    Corey

    If this card needs a driver you will not find it on the download page of manufacturer of portable. You must check the card producer site.

    As you know in the world of computers, it has set different standards. Produced very often cheap are not designed for these standards, and you can have different problems. I recommend you to use high quality products.

  • IdeaPad Y500 does not detect the camera

    Hello everyone!

    I had my Y500 for about 1.5 years and I can't use the camera more. The computer does not detect the camera and when I downloaded and installed the camera software the computer shows me "no approperiate driver to install! I tried to uninstall the camera driver and reinstall it again, but it's the same problem.

    I would appreciate a quick response

    The problem was with the camera and the camera cable. I sent my computer to
    Lenovo and they fixed.

  • X 220 does not detect the wwan card

    My X 220 does not detect the wwan card ("WWAN MSC PRTSWWAN RDY FUL" in the parts list). No section of modem in Device Manager, without any question related to the wwan card. Please someone help me, how to make my OS (Win 7 Pro x 64) can detect the wwan card?

    1.17 BIOS can detect, it worked normally.

  • Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

    I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

    Any help would be appreciated!

    Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

    http://www.pendrivelinux.com

    If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

    MS - MVP - Elephant Boy computers - don't panic!

  • 4380 all-in-one printer does not detect the print cartridge

    My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

    I'm sorry you have a problem with your ink not detected.

    The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

    For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

Maybe you are looking for