Qosmio G50 - FM Tuner/TV Tuner do not work together

Hello

I search for a solution to my problem but still have not seen anywhere.
My problem is with my G50 (Aust version PQG55A-04J01Y) which has the tuner FM (Toshiba FM Tuner FM - 100 v1.1.0.48) and the TV tuner (Toshiba USB DVB-T/Analog Hibrid Tuner v 2.3.3.21) built in.

I am running Vista Home Premium (32 bit) with all the latest updates from Microsoft.
I can't get the two to work together, they function separately.
I'm not talking at the same time. I need to configure each one whenever I have swap between them.

* To implement, I open WMC and go to:
* "Tasks".
* Settings.
* "TV".
* Set Up TV Signal.
* Confirm my region as the Australia
* WMC then download the latest info for my region and I can then "Select your TV Signal"
* Here, I get to choose between 'Câble', 'Satalite' and 'antenna '.
* I select 'Antenna' and click Next
* I then have the chance to choose between:
# "Analog terrestrial (PAL/SECAM)" - which activate the FM tuner
# "Digital terrestrial television (DTT)" - which activates the TV

If I set up the TV I lose access to my FM radio and WMC tells me that I don't have a FM tuner installed.
If I set up the FM tuner I lose all my TV channels that I've saved.

Why the two could not work together? :_|

Hello

> Note that in the bowels of the system, there is a 32-bit program FM tuner, but also an FM tuner 64-bit, but maybe you can run a?

I think you can notice a program 32 bits and 64bitbit because of the different versions of Vista. Vista 64 bit OD needs a 64-bit driver and Vista 32 bit needs a 32-bit driver.

Back to your problem with the FM and TV tuner:
I put t have an Australian series G50, but I think the Akuma is right. Tuner FM and TV tuner is a device I think, so you can safely just sort of signals; TV or FM.

See you soon

Tags: Toshiba

Similar Questions

  • Qosmio G50 802.11n enabled but does not work properly

    Hello

    I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

    -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

    can someone help me?

    Greetz

    Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

    Access device wireless LAN settings in Device Manager to change these settings.

    Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

  • Qosmio G35 - TV tuner does not work in Turkey

    I bought G35-AV650 of us (ntsc) and it does not wotk in turkey (pal)
    is it possible to change NTSC to pal
    Thanks in advance

    CEM

    Hi Cem

    I hope that this document will help you http://support.toshiba-tro.de/kb0/TSB4600QF000OR01.htm

    Good bye

  • Qosmio G20-139 of the United Kingdom - TV tuner does not work in Libya

    Hello

    My name is m, k, sh I live in Libya.
    I bought Qosmio G20-139 until now it works normal but I would not use this pc to look at the possibility of using satellite channels. I get only the small screen in the screen of my pc.

    In the operating manual of the said (tv tuner may not only work in the country of purchase. means to the United Kingdom only)
    My equation, what can do to solve the broblem.

    Can I install any software for example or another TV tuner?
    The tv tuner in this pc, what they said is integrated.

    Thank you very much

    Hello

    I think that the UK tuner will not work in Libya due to different video standards. I m talking about different settings PAL and NTSC.

    In your case, it would be desirable to use an external USB DVB - T tuner (if DVB - T is available in Libya) that supports PAL/NTSC in Libya settings.

    I think you have to look at some stores for local laptop/computer and should ask a few merchants for details.

    Welcome them

  • On my Satellite A660 TV tuner does not work

    Hello

    I bought a Toshiba Satellite A660-07 one a few months ago and then reinstalled Windows 7 32-bit system in order to have more than a few partitions. But I had not deleted the hidden partition the system just in case I need to restore factory settings.

    Now I have moved to a remote area and need a TV but only to discover that the tuner did not work. It is detected correctly under sound devices and games in the Device Manager. However, when I use windows media center to scan channels. The WMC just says the software has encountered a serious error and try again.

    Then I tried to use Blaze DTV, which is also a very popular DTV software. Successfully, it recognizes the Tuner but will not scan either.

    I did some research and used the advocatus of configuration of the tuner TV in Windows 7. The warning message is that "the tuner is not properly configured to be used in Windows Media Center". And the details show that the tuner is plugged but not active for the WMC.

    But how do I then activate the tuner for WMC?

    Really hope that someone can help as I am now panic in a small town remote in New Testament.

    Thank you!

    > I bought a Toshiba Satellite A660-07 one a few months ago and then reinstalled Windows 7 32-bit system in order to have more than a few partitions. But I had not deleted the hidden partition the system just in case I need to restore factory settings.
    I see a big problem here. If you have installed your own version of Windows then you will not be able to start the installation of image factory more.
    Due to this fact Toshiba strongly recommends the creation of recovery DVDs. It is described in s operating manuals.

    In any case, one question at first: you've found the right 32-bit driver TV tuner? TV tuner is installed correctly?

  • Qosmio X 500-1801-FN key does not work with Win 7

    I have to question why Toshiba Qosmio X 500-1801 FN buttons does not work on the Windows 7 Professional 32-bit operating system. Please answer the [email protected]

    For the FN buttons work, you must install VAP (value added package) and Flash memory card Support utility.
    These two tools are located on the European driver Toshiba page.

  • Desktop SMS and Windows Mail are not working together

    Hello

    thought I'd post here here as having a few issues with my Windows Mail but my desktop computer suffers the same problems and on a Vista forum where I posted my problem a few very useful told me who to try to solve the problems.

    One of them suddenly realized I had said my laptop is a Toshiba, and apparently the Desktop SMS and Windows Mail are not working together so that the person suggested unless I use it to uninstall apparently amongst the technically trained its known that these two programs do not like each other and explain why my office is not the problem but the laptop don't.

    After you have reset the Touch of Windows Mail (tutorial on a site http://www.vistax64.com/tutorials/ vista) wood don't be put off by vistax64 as site 32 and 64 and followed great reset Windows Mail from Brink (do not restore all mail) then uninstalled Desktop SMS and touch of the drink no more mail questions that gave me problems almost every day with marking than reading/sending project messages.

    So had to click forward then remove those bits and complete the email to send and touch wood since doing these two things as soon as send an email to the box shipment or project to obtain the number of emails in parentheses, whereas before it wouldn't happen unless I closed the program and then reopened.

    Hoping that these solutions have solved my problem and wanted to share it with someone else who wants to read this thread and you recommend Vista 64 because they are all very useful there and speak in non-technical terms for those of us not technically trained.

    Debbie

    Thanks for this piece of information. Should be useful for some of us.

  • Qosmio G50 - TV Tuner "not found service.

    I recently bought a model Qosmio G50-420 2 days ago and I tried repeatedly to get the TV up and running, but every time WMC scans for services, there are not found.

    I've updated the drivers from the Toshiba site and I even tried to use MediaPortal but this program is not all 'channels' either... and theres a "indicator signal strength' when trying to put in place channels and it displays nothing with all my devices (tv, fm tuner tuner, etc.).

    I don't live in a rural area... How do I get all services?

    I am running Vista Ultimate 64-bit btw.

    Hello

    Qosmio G50-420 is not known to me are you sure it of a G50-420?
    Check that the labels at the bottom of the unit there are few issues of model.

    As far as I know that some Qosmio G50 models are equipped with the TV tuner, but this isn't the case with all the G50.
    You should check if your G50 has been equipped with TV tuner.

    In addition, it would be very interesting to know how connect you the G50 in order to watch TV on the laptop?
    A connect to a set-top box?

    Please see the manual (page 155) for more details.
    There are a few images and add information that might be useful!

    See you soon

  • TV tuner does not work with SP1 Vista32 on Qosmio G30

    Hello

    My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

    Did someone knows a solution?

    Your Ruediger

    Hello Ruediger

    I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

  • F20-137: TV Tuner does not work on MCE

    I just purchased a Qosmio F20-137 and when I set up the TV Tuner (DVB - T) I had no problem. However when I try to watch TV on Media Center he frequently stutters and loses its signal (about once every 2/3 minutes). I tried a couple of different antennas ready (DVB - T), but the problem persists.

    I thought it was due to the TNT being strong enough signal. However I recently bought a £45 Freecom (DVB - T) usb to my desktop and it rarely or never stutters or loses its signal. The USB device does not work on the Qosmio so that I couldn't try on that.

    Is that what this indicates that there may be a problem with my laptop? Or can anyone suggest a possible solution to the problem?

    Thank you

    [Edited by: admin November 26 05 08:32]

    Hello

    Well, it s a strange question.
    Have you tried to watch TV via Qosmio player?
    In my opinion, you should check if this problem occurs when the Qosmio player.
    Please check.

    Good bye

  • Qosmio G50 PQG55A: NVIDIA driver - update or not

    Hello

    Thanks in advance for anyone who can help.

    The short question is, should I update my NVIDIA driver from 175,90 (as shown on the Web from Toshiba site) to the Version: 186.81 WHQL as suggested by the NVIDIA site.

    The long version follows...
    My Qosmio G50 (PQG55A-04J01Y), running under Vista 64 Bit, crashes intermittently. It is sometimes good for more than a week earlier, sometimes once or twice a day.

    I was quite thorough with virus and malaware controls.

    Everything seems to stop, even if the mouse still works.
    I have to turn off the PC, sometimes reboot Check Disk runs and corrects errors.

    Windows Problem Reports and Solutions comes with the following:

    ------------------------------------------------------------------------------------------------------------------------

    A problem with the NVIDIA graphics driver
    NVIDIA Graphics Driver has stopped working properly.
    An update of the driver, as appropriate, could prevent this problem does not happen.
    There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

    1. search the optional third-party updates
    2. try to manually update the NVIDIA Graphics Driver
    3. check the NVIDIA Corporation Web site for driver updates
    4. check the Web site of the manufacturer of your computer for driver updates

    If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

    How can I find the manufacturer of my computer?
    How to upgrade manually a pilot using a file downloaded?

    1. updates of Windows are perfectly up-to-date.

    2. when I try to update driver I get the message;
    + Windows has determined the software driver for your device is up to date. +
    However...

    3. when I use the NVIDIAs tool to automatically search for updates, I get the following:

    NVIDIA driver downloads
    Product

    NVIDIA GeForce 9600M GT
    Current installed Driver * 175.90*

    Driver was last updated
    Computer laptop version 186
    Version: * 186.81 WHQL *.
    Release date: August 27, 2009

    He said also;

    + The program driver NVIDIA Verde Notebook, this is a reference driver that can be installed on laptops NVIDIA GPU. However, please note that your computer laptop OEM (OEM) provides drivers certified for your mobile specific on their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. OEM may not provide technical support for the issues raised by the use of this driver. +

    5. but here on the Toshiba site he says nVidia NB9x Display Driver true display VISTA 64 Bit 18/05/2009 7.15.11.7590 51,35 MB

    That is to say, the driver I have already.

    So... should I install the latest driver or not?
    If not, is there anything else I can do?

    Thank you very much for reading all this and thanks in advance for any help.

    See you soon

    Steve

    > Short is, devrais I update my NVIDIA driver from 175,90 (as shown on the Web from Toshiba site) to the Version: 186.81 WHQL as suggested by the NVIDIA site.

    Generally, you must use the graphics driver downloaded from the Toshiba driver page.
    The graphic card driver from the Toshiba page has been tested and it s certified by Toshiba.

    The common graphics driver nVidia is not designed for laptop and that's why these drivers don't support a protection against overheating.
    Driver Toshiba done!

    So using the page nVidia graphics card driver can be risky and could overheat your GPU so the use of 3 third-party drivers is always at your own risk!

    I have thin you should stay with the driver from the Toshiba page

  • Tot on HP Pavilion dv7-1090ed TV tuner does not work after the upgrade to Vista 64 bit Windows 7

    After having upgraded my HP Pavilion dv7-1090ed Vista 32 bit to 64 bit Windows 7 Ultimate, my TV Tuner no longer works. Windows Media Center does not recognize there is that a HP en DVB - T TV tuner is not able to find the digital terrestrial channels-tv, I could look under Vista.

    I searched several for one for the advice and tried to install several recommended drivers but so far without success. Can someone help me with this?

    Hi Charlie54,

    You can try using Recovery Manager to restore the software and drivers (Windows 7) to restore the original drivers, or you can try to install the Windows 7 drivers.

    Here is the Windows 7 drivers for the Software HP MediaSmart Live TV and the TV Tuner driver, they should both be installed.

    I hope this helps, please let me know.

    Thanks and good luck!

  • Qosmio DX730 and Win8 - touch screen does not work

    Hello

    My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

    The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

    I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

    Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

    Thank you.

    Hello

    On the page of the Toshiba UE driver you can find drivers for Win 8.
    As far as I know that you will install the Toshiba display driver for the touch function works correctly.

    I found this driver.
    Please check if you can install this:
    [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]

  • Qosmio G30 - Media center remote control does not work in windows

    Dear all,

    I have a Qosmio G30-194,
    first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
    Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

    Please advise me what to do, should I send it to the service center, or there is an easier solution.

    Mazen h
    NB:,: my laptop info are:

    PQG32E-01P018AR model number

    Thanks in advance

    Hello

    > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

    If you had a problem with the VGA chip then the whole motherboard has been replaced.
    Maybe it has something to do with your problem.

    Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

  • Qosmio G40: Vista Ultimate - control buttons do not work properly

    Hello friends,

    I have a Qosmio G40 for a few months and everything works well until now.
    The problem is related to the front control panel.

    If I use Windows Media Player, PLAY/STOP/PAUSE/FORWARD/BACKWARD buttons work well, but if I try to use the other buttons like REC (in any case) or turning on LEDS or DOLBY, the button makes the usual sound, but nothing happens, does not open any program that is supposed to open.

    Does anyone have an idea why this is happening. I tried to look for any software configuration of these buttons but can't seem to find.

    My system is Windows Vista Ultimate Edition.

    Best regards
    Ricardo Monteiro

    Hello

    The European driver Toshiba page provides the AV controller Manager
    This tool allows you to customize and TOSHIBA AV Control button preset settings.

    Maybe you should install this tool and it should check again.

    In addition, it would be advisable to reinstall the VAP

    Check it out!

Maybe you are looking for

  • What is the capacity MAX HDD for Satellite A210 - 11 c?

    My laptop contains smart 5400 RPM and 160 GB. I think I have a mechanical problem with HARD drive because of the annoying voice.That is why I want to change it with a new one, but I don't know what will be the largest capacity of the new?

  • Screen goes black

    I have a HP Pavilion computer g6. After signing in, it will host then the entire screen goes black. Can someone please help and tell me what to do? Really appreciate all the answers, thank you

  • SX20 camera not recognized

    Our telepresence PrecisionHDMC 2.5 x camera is no longer recognized by the SX20. The camera itself shows a blinking white light and it seems to be stuck trying to adjust. He clicks on 8 or 9 times, waiting a second or two, then on again. The electron

  • UMIR v WD

    I can not calibrar as nuclei meu monitor. Tive as desliga-lo para limpeza mobile ontem e ao religa-lo a tela sem as cores originais it was. Esta meio e lilac I can not calibrar pelas Instrucciones fornecidas pelo message of control.

  • LOB partitions

    Hellois there a way to abandon the lob partitions in 11 GR 2?