Quad HP Envy 15 t-j100 more: what memory do I have?

Similar Questions

• How to use a virtual machine that requires more physical memory that I have?

  A colleague send me a Linux VM, he built on a machine with much more physical memory 4 GB I have in my Macbook Air.  When I started the virtual machine in Fusion, he said that the more physical memory virtual machine that I had and suggested that this would reduce the memory for the virtual machine to 3 GB.  I said OK and the machine started.  I did a lot of work in this virtual machine.  I suspended the VM because I needed to recover a portion of memory that he used for another application.

  When I try to start the virtual machine now, it says that it requires 4 GB of memory and that I should quit some applications or restart to free the memory required.  I tried both without success.

  Why the parameter / 3GB was not recorded when I suspended the VM?

  Given that I can't change the memory required for the virtual machine until it is properly closed and since then I can't stop the virtual machine without unsuspending it, I suspect that the VM is toast.

  Is it possible to recover the virtual machine?

  With VMware Fusion closed, you can remove the file from .vmss to to reset the VM to a shutdown state.  Note that whatever it is not recorded when he was suspended will be lost.

• Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

  Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

  Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

  I have to go back to the previous version - Windows 8.1.

  Back with success on Windows 8.1

  Symptoms point to video card problem after updated Windows at level 10.

  My laptop has two, provided by HP online:

  Intel HD 4600 Grapics (internal)

  NVIDIA GeForce GT 740M

  See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

  Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

  The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

  The Task Manager showed that more CPU resources would "host setting synchronization process.

  Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!
  
  Would appreciate recommendations on the way forward for Windows 10.

  Dgood43 wrote:
  

  Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

  I was allowing the HP site automatically detect my curent - Windows OS 8.1.

  When I manually switched OS Windows 10, I see it listed.

  I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

  Can I install both of these drivers before you upgrade Windows 10?

  Both are supported on Windows 8.1?

  If so, why HP Support Assistant would not have install me the upgrade?

  Am I missing something here?

  Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

  When I click on the button 'Download' blue, it offers two choices:

  Use HP download and install the Wizard (recommended)

  Download only

  This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

  Thanks again for your help!

• Quad Edition CTO Notebook HP ENVY 15 t-j100 fan noise

  I recently bought a HP ENVY 15 t-j100 Quad CTO Notebook Windows 7 Professional Edition (PC product #: E1P05AV) and I noticed that when the laptop is under any kind of load, the fan can be incredibly strong. There is no abnormal noise, but the volume itself can be irritating. Basically, it looks like a dryer located on the top. I was wondering if it was just a normal phenomenon or if there was something more to him. I have the latest version of the downloaded bios, and there should not be any dust or dirt in the book since I just got. If someone could shed some light on this, I would gratefully.

  Hello
  
  Thank you for visiting the forum!
  
  I understand that whenever there is any kind of load your system fan noise, it's usually an overheating problem that I suspect.
  I really recommend that you quickly go through the following documents & try to do at home and hopefully solve the problem.
  
  http://support.HP.com/us-en/document/c01007591
  
  http://support.HP.com/us-en/document/c01657439
  
  Hope this helps you,
  
  Thank you

• HP ENVY 15 t-j100 Quad Edition: replace the motherboard for HP ENVY 15 t-j100 Quad Edition CTO Notebook PC

  HI guys,.

  I have "HP ENVY 15 t-j100 Quad Edition CTO Notebook PC"

  Serial number: (deleted content)

  Product number: E1P04AAR

  Bought a laptp renovated off eBay from someone with thousands of positive feedbacks. It worked great for 6-7 months and then one morning it has not started up. I tried everything, called Hong Kong HP support and even bring to the service center, but was not able to get it fixed because this model was never launched in Hong Kong...

  I tried calling HP we support and they would fix it for $ 300 + and that too, I send this laptop in the USA to someone I know and then HP will come from there. Is not possible.

  So now what I'm trying to do is to look for the replacement of the motherboard, this is what im says does not work. I searched and found these links - I need to know if it is OK for my model?

  http://www.eBay.com/Sch/i.html?_odkw=HP+envy+motherboard&LH_PrefLoc=1&_udlo=49&_mPrRngCbx=1&LH_FS=1&...

  It will be a great help if you guys allow me to know which of them is compatible with the model above.

  Thank you!!

  Hello

  It's a CTO machine therefore normally only available in the United States and perhaps the Canada. Please use a portion for PC cards from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=E1P04AAR

  Again, it is a machine CTO, you should check its parts before you buy any replacement.

  Kind regards.

• HP ENVY 15 t-j100 Quad Edition: upgrade of the current HARD drive

  I have HP ENVY 15 t-j100 Quad Edition laptop which currently has a 1 to 5400 RPM HARD drive. I'm looking to upgrade to SSD drive and need help with the following responses

  (1) the laptop does support more than 512 GB since the laptop computer maintenance document lists (and does not) support max 512 GB

  (2) any 2.5 SATA 3 SSD should work with the configuration given my laptop as long as its not more than 9.5 mm thick. Please confirm.

  I was chatting and asking for a response for the last month 1 HP support and I have not received a positive response. Forums suggest that capacity any no where like the cat and people on HP customer service gave the following answer.

  The manual list only up to 512 GB because that's all there was when the laptop was sold or just would not be a market for the 1 TB SSD. Not too long ago, they were $7-800 and beyond almost anyone means. But there is no reason that your laptop can not run a 1 TB SSD. Also, you are right. All SATA 2.5 inch wide SSD will work as long as it's not more than 9.5 mm thick. These days, almost all of them are 7 mm. I would recommend a Samsung 850 Evo but there are a lot of good ones out there. We had a set of trouble on the series MX Crucial reports, however.

• HP Envy 17 t-j100 Quad Edition: product number mismatch

  Hello!

  I'm about to upgrade to Windows 10 and have questions about my laptop.  By my initial order, the number of the product I ordered was E4S82AV, but the HP Support Assistant and the battery compartment that it is E1P14AV. When I touch E4S82AV in the issue of the product on the site Web of HP, no software or drivers are found. I have a matte screen, no touchscreen model.

  Can someone tell me the difference between these two products numbers and why the one I ordered does not appear to exist on the support Web site? It's not touchscreen touch vs?

  I fear that if I need software or driver updates, those under E1P14AV are really suitable for my system.

  For example, I had a problem with an update by HP Support Assistant on my CyberLink PowerDVD software failure (it finally updated OK).  He had several Softpaq SP70823 and this file already exists in my folder in C:\SWSetup.  I checked the support Web site, thinking I would try to download the software from there, but I don't see that listed as an option under E1P14AV sp70823.

  Thank you!

  Your Envy 17 t-j100 Quad Edition is a CTO (configure to order) machine that starts with a number of basic product which replaces a specific number of product once that order you with the card you want. Not sure about the DOWNLOAD - but not the first time neither model which has software missing from the support page.

• HP ENVY 17 t-j100 Quad Edition: battery problem?

  According to the battery in the taskbar icon...

  "70% available (plugged in, does not support).

  UH... Why is he not supported 100%?

  Hello @paradive,

  Welcome to the HP Forums!

  I read your post on your ENVY 17 t-j100 battery does not charge and wanted to tender hand for you.

  The system shows the loading if you disconnect and then reconnect the battery power adapter? The question has just begun or occurred after an update or upgrade?

  You can start to test and calibrate the battery and review suggestions on improving the performance of the battery.

  If you haven't already done so, please make sure that you use the latest software and device drivers for your system.

  If one of my suggestions will help you to solve the problem that you are experiencing, please click accept as Solution so that others who may have the same difficulty can find the answer more effectively. Thanks again for participating in Forums of HP!

  Thank you!

• HP ENVY 15 t-j100 Quad Edition: drivers and software for simplepass with finger print reader.

  I have a HP ENVY 15 t-j100 Quad Edition laptop and I need simplepass software and drivers for the fingerprint reader.  I win 10 and simpelpass software has been deleted by mistake.  I can't find where and how download from the hp web site.

  @shadow_42

  Welcome to the Community Forum of HP.

  There are a small number of Windows 10 HP drivers:

  HP ENVY TouchSmart 15 t-j100 Quad Edition CTO Notebook PC

  Please check - in particular, you may want to ensure that you have installed the Chipset driver.

  ===================================================================

  Windows 8.1 driver revealed this Eagle Driver validity for your fingerprinting device:

  sp63418.exe

  Series 8 HP SimplePass program has just been updated for Windows 10:

  sp71729 HP SimplePass V8.01.46has 32/64 bit W7 - W10

  • Install the driver first, restart the computer and log in
  • Install the program HP SimplePass second, restart the calculation and sign

  Help, Information and general advice:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Section:

  Procedure - updated / (install HP SimplePass Re)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Quad edition of Envy 17 t-j100: replacement hard drive

  need to replace the disk hard drive serial # [personal information deleted] in my touchsmart Envy 17 t-j100.   Cannot afford to sata now.  Any suggestion where I can buy a compatible to the original.  This is a 1 to 5400 RPM.

  terfig wrote:
  

  ..... Cannot afford to sata now. ...

  Hello

  You MUST use SATA, no choice. You're probably talking about SSD. There are several standard HDD around. I bought one week last disk HARD next to test things-much cheaper elsewhere

  http://cplonline.com.au/hard-drives/laptop-hard-drives/2-5-Seagate-1TB-with-8g-MLC-Seagate-Momentus-XT-laptop-HDD-st1000lm014.html

  http://cplonline.com.au/hard-drives/laptop-hard-drives/Seagate-st1000lx001-1TB-laptop-sshd-w-32GB-NAND-2-5inch-SATA.html

  You can buy WD, Toshiba, Hitachi...

  Kind regards.

• TouchSmart HP ENVY 17 t-j100: I want to upgrade to SSD drive

  I have a HP ENVY 17 t-j100 Quad Edition CTO Notebook computer Touchsmart (ENERGY STAR) and you want to update the drive with a Solid State Drive and options I have are 1 to 2 TB but it asks for the interface and I'm not sure if this unit hadles interface SATA, SATA11 or SATA 111 so I prefer the faster out there please let me know if mylaptop can handle SATA 111 SSD 1 TB drive

  Hello

  From my memory, the HP ENVY 17 t-j100 Quad Edition CTO Notebook Touchsmart (ENERGY STAR) use SATA III. YUO can use the following tool to check:

  http://download.cpuid.com/PC-Wizard/PC-wizard_2014.2.13.exe

  More information is located on the following post:

  http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/how-do-I-determine-if-my-computer-can-handle-SATA-II-or-SATA/TD-p/2352227

  Kind regards.

• HP Envy 15 t-j100: keyboard NOT working on HP Envy 15 t-j100 computer laptop

  Hi all!

  I have a HP ENVY 15 t-j100 Quad Edition CTO Notebook PC (ENERGY STAR), and most recently updated Windows 10 Saturday (a set of recommended updates), and after parts of the update on my keyboard no longer works. The bottom three rows of keys work fine, but the top row is 1) keys do not work, or 2) keys randomly type other keys (ex. The 'P' key types';  5, 6, t and touch still works well, the rest do nothing). I have Windows 10 build 1511 and connecting an external keyboard (wired and wireless) and keyboards work fine. I ran a system restore to remove all applications, while preserving my files yesterday with success, no improvement. I also cleaned the keyboard with air compressed and removed the oil on the surface with alcohol isopropyl (to friction) (of use). In addition, my updates are currently blocked at 39%. I have uninstalled/reinstalled the drivers for the keyboard through the devices, and update manager different drivers through the HP Web site. I also have many resets have little hard done to solve this problem.

  Any help to fix this would be appreciated! I don't know what to do!

  15 t - j100 REPAIR:

  Manual

  See p. 92. Keyboard replacement is only a little trickier on this model, I'm sorry to say. If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ENVY 17 t-J100 Leap Motion: keyboard backlit ENVY 17 t-J100 Leap Motion edition shuts down after each power down.

  My brother has an ENVY 17 t-J000 Quad Edition. Only about 6 months. Its backlit keyboard remembers its state of on or off when it reboots or off. When he turns on his laptop back, the keyboard is always if it's him on when he turned off the laptop.

  I just got the ENVY 17 t-J100 Leap Motion backilt keyboard edition. But every time that I reboot or shutdown with the backlight on, it is turned off when I have the laptop or reset. So whenever I have to re - turn on the backlight. Very annoying.

  Anyone else with the jump movement 17 t-J100 having this problem? If so, I hope it's fixed soon. I also can't update the Nvidia drivers then perhaps we need a BIOS update to solve these two problems.

  I just checked to be sure. It turns off if the laptop is turned off and turned on then again - but if I just restart the kbd is running.

• Don't ENVY 15 t-j100 no sound, computer lag, dosnt load video

  My HP ENVY 15 t-j100 Select Edition, I bought a year ago and has been flawless, but I noticed that my sound is not loading, I noticed a few times, but never put thinking to it.

  recently I noticed that my web pages took a long time to load, in offbeat video Facebook and not sound

  So I thought it was time I did a cleanup then reinstalled Windows 8.1 {twice}

  I found that the sound would not load, I found in Device Manager the sound icon has been crossed out, removed and not reinstalled audio drivers still no sound, I also installed another set of drivers of HP that was no help, the sound would not load configuration check in the speakers, and when he did load his new filling pages and gel

  Even noticed it wouldn't wake up sleep and sometimes a hard reboot.

  I did a test config F2 all pass and Yes Virus scan

  I've tried different drivers from Intel, Nvidia video drivers without change, by default Internet Explore 11 several times used not Chrome no difference

  Times I can get sound but this will cause a blockage, usually I have to do a hard reset

  I tried several relocations OS all have the same problem

  I think what's then contact for repair

• Envy 15 t-j100 card reader does not

  I have a HP ENVY 15 t-j100 Quad Edition running Windows 7. His card reader does not work. When I insert an SD card, I get a message that the device is not installed correctly. Windows prompts you to update me the driver, so I let him, but he can't find the driver. In devices with SD card inserted, Manager it shows a symbol in the "Other devices" section "hard drive"with a yellow "!"  The State of the device reads:

  "The drivers for this device are not installed. (Code 28)

  To find a driver for this device, click Update driver. »

  I tried to update the driver from there, but still no driver is reported to be found.

  Furthermore, Device Manager indicates that the Realtek PCIE card reader works properly. I updated the driver using sp66065.exe, but there is no difference. The card reader is still not read, nor is it a drive letter appear to the inserted card.

  If I disable the Realtek PCIE card reader, then the "other devices" "Hard drive" in the Device Manager goes. But the card reader does not work as long. If I activate the card reader, the same error comes back with a yellow '! ' under 'other devices' "Hard drive" in the Device Manager.

  Could you please tell me how to resolve this situation? Thank you in advance!

  jacksan1

  You are the very welcome!

  Oh... It's big, happy that the problem was solved after recovery

  It would very probably be updates of Windows.

  Try to create a system restore manually each time before performing any installation of update or something important. You can restore to a previous restore points you have created, if a problem occurs after an update.
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  You can also create a shortcut to a button in your office so that you can easily create manual restore - Option 1 point in the following tutorial:
  http://www.SevenForums.com/tutorials/494-system-restore-point-shortcut.html

  System Restore: http://www.sevenforums.com/tutorials/700-system-restore.html

  I would also change the Windows Manual Automatic Update settings.
  This must be done in the HP support assistant program too - its control panel.

  I hope this helps.

  Have a good weekend
  God bless you.

  Concerning

  Visruth