Quality of rpint HP Laserjet color faded to the right of the page, toner cartridge the culprit

Similar Questions

• HP Color Laserjet MFP m277 Pro: can I put my old toner cartridge to finish?

  I hope it's a simple question.

  We changed the toner Cyan on the printer cartridge until it was over. There was a problem and we thought he meant that the cartridge is empty. The problem turned out to be something else. So now, I have a cartridge that is perhaps used three quarters and a new in printing.

  Question: when the CURRENT one runs out, I can put the previous again in the printer to use, without causing any problems for the printer?

  Thanks for any advice.

  Yes, you can put a Toner Cartridge used back with no problem, the printer may indicate its levels of toner correctly, but it can be used without any problem.

  Kind regards

  Shlomi

• 100 HP LaserJet color MFP M175: scan to the PDF Format

  Hello

  While using the scanner of HP LaserJet 100 color MFP M175a I don't get an option to save the file in PDF format. I use a scanner through Windows Fax and Scan. Kindly help

  Hey @HBootwala,

  Welcome to the Forums of HP Support!

  I see you are trying to scan PDF documents of your 100 Laserjet color MFP M175a printer to your computer for Windows 8.1. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once that is done, scan, you want to scan using HP Scan, rather than Windows Fax and Scan. You can download the latest version of HP Scan by clicking this link. Once installed when you need to scan, you can open the program and select this option to save your document in PDF format.

  Please let me know if this solves your problem by clicking on accept solution. If you still have questions, please let know what happened during the installation of your software and I'll be better able to help you. If not, have a great day!

• Specifications weight paper for 100 HP LaserJet color MFP M175

  I tried (unsuccessfully) find the specs of paper weight for 100 HP LaserJet MFP M175nw color printer. The user manual and the online help only useless information offer, not specified, such as: use only paper that is approved for use in printers laser and meets the specifications of weight for this product. Tried to get the specs of weight of paper for this product - no luck! I want to print on 200gsm (laser friendly paper), but don't want to damage my printer. Help, please?

  I responded to your post on another thread. Here is a link to this thread. If it helps please let me know. Here is the link: http://goo.gl/dTSrZ

• How do I know what toner cartridge for HP Color Laserjet CP1215?

  I have the HP Color Laserjet CP1215 printer. The vehicle currently has the following four toner cartridges.

  CB540A - black

  CB541A - Cyan

  CB542A - yellow

  CB543A - Magenta

  Trying to find replacement for the printer cartridges, I see several different cartridges options, such as the CC531A, CC533A, 124, etc.. So my questions are?

  1. What are the different types of cartridge available for HP Color Laserjet CP1215?

  2. make the serial numbers indicare or say anything?

  3 HP has a number where I can call and buy cartridges of.

  The correct cartridges for your printer is located in the HP SureSupply Site.  You can also order on this site, in the United States there free shipping next day company.  It appears for your printer you should of 125A cartridges, your post numbers are compatible with those contained in the SureSupply site.

• Color LaserJet Pro: Help need driver for Mac Yosemite 10.10.2 for LaserJet Color Pro...

  Please help me find the driver for HP LaserJET COLOR PRO 200 for MAC OXC 10.10 YOSEMITE

  This should be what you need

  Driver for OS X 10.9 Mavericks and OS X 10.10 Yosemite

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-125410-4&cc=us&DLC=en&LC=en&OS=4182&productOid=5097639&sw_lang=

• Color LaserJet 1025: where in the printer 'HP Color Laserjet' machine is the color cartridge / Farbpatrone

  for the color RED light flashes

  where in the machine 'Printer HP Laserjet Color' (location/place in the machine) can I find color cartridges

  that I need to replace.

  Die fuer die LED Farbe rot books end Fuellstand! Nun muesste ich die ROT-cartridge replace

  da ich is ueberwiegend nur mit schwarz group habe und auch nur die shcwarz --Tonercartridge ersetzt habe

  konnte ich den ORT gained der Maschine nicht find wo sich die Farb-cartridges are winds of die ich muss.

  Die PDFs fuer den 1025 color enter keine statement (very konnte ich find nichts dazu

  und bisher nicht antwortet HP support!

  Was soll ich machen mir einen Epson tintenstrahl Drucker kaufen und den HP 1025 color wegwerfen nur weil die RED Farb LED Toner-red nachkaufen anzeigt?

  The Series CP1020 LaserJet Manual User Guide (which I think applies to your model of CP1025 ) shows how to replace the cartridges. the first steps are:

  

• Color LaserJet 2605dn: changing the toner cartridge guaranteed?

  Can someone help me to replace what seems to be a faulty cartridge? I could find absolutely no information on how to do it on HP's Support website to the regular address.

  Q6003A magenta toner cartridge prints very light. Looks pink instead of magenta. This is true even on the 'Page State supplies", which shows the level of toner to 74%: Pages printed with this power supply: 418; Rest of approximate Pages: 1189. I have 'shaken gently"the magenta cartridge without result, and I see no flaws on the drum. 'Cleaning' running mode did not help; He only printed black. The other three cartridges all show them a solid color, so I deduce that there is a problem with the magenta cartridge itself.

  See below. The title and the area around it are supposed to be "Purple"; There should be a (not complete magenta) rose "2605dn" to the right of the printer "HP Color LaserJet.

  Any suggestions as to how to get this replaced would be greatly appreciated.

  

  You do not have a faulty cartridge, you have a dusty mirror in scanner Assembly laser.

  You will find the instructions on how to disassemble the printer and clean the mirror through various sources online and probably even in the forums.

  The index that identifies your problem is melted magenta from left to right.

  If you decide to take the machine apart and clean the flat mirror handle cables very gently then reconnect the very carefully.

• HP Laserjet Color Pro MFP M476dw "standby prevents reception of fax.

  German:

  Hallo.

  ICH habe einen HP Laserjet Color Pro MFP M476dw in Betrieb genommen.

  Nun ist das problem, dass different Kunden bemangeln, dass keine fax mehr an mich gesendet werden können.

  Wir haben noticed, dass die erst passiert, wenn der MFP in "Ruhezustand" geht.

  In den Einstellungen finde ich nur eine Zeitspanne bis maximum 60 Minuten bis zum Ruhezustand.

  Can someone help?

  Danke und Gruss Easydiver

  English:

  Hello.

  I got a HP Laserjet Color MFP M476dw Pro in operation.

  Now the problem is that different customers are complaining that no fax more can be sent to me.

  We noticed that only happens when the MFP is "steady state".

  In the settings, I find only a period of time upward to 60 minutes in the idle state.

  Can anyone help?

  Disable the Mode of fixed error

• HP CC522A - size of the PRINTER HP LASERJET COLOR MFP M775DN 700

  HP CC522A - size of the PRINTER HP LASERJET COLOR MFP M775DN 700

  HP CC522A - size of the PRINTER HP LASERJET COLOR MFP M775DN 700

• blue color 1518ni Colo laserjet hp gradually separates the characters even grayscale.

  I'm getting blurry printing and it seems that blue color shadow gradually separates in the text even when printing in grayscale. Is it an alignment issue curable, bad cartridge or what?

  Hello richpoirier,

  There are a few things that could be causing that. The toner cartridge is bad is certainly one of them. It could also be that the inside of the printer needs to be cleaned.

  Let's start with this troubleshooting article to see if it solves the problem.

  Solving print quality problems

• Color laserjet 4600 - problem with one color (yellow) for the most part does not print

  Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

  We tried to replace the yellow toner cartridge, and it was not fixed.

  PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

  In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

  Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

  Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

  It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

• The color faded after Windows update

  Hello

  
  I had a quick search but am finding the interface of the somewhat difficult forum looking for, sorry in advanced if it is a double upward.

  Recently, I noticed that images open in both photoshop and lightroom are washed-out (blue tint, as if you have the color space is set wrong).  However when I open the image in the image windows photo viewer looked perfect.

  All images are set to sRGB in all respects.  When I open the images in photoshop from another machine, they are also very good, and I compared the config including color spaces of the two machines of... no difference at all...  It's just that a pc that has the problem, and on this pc, the problem only occurs in photoshop and lightroom - unfortunately the PC in question is my pc edition.

  This problem has been completely resolved to roll back the update of birthday windows 10 - no other changes at all, I have believed it if I hadn't seen with my own eyes.  So I'm going well so far, but this is obviously not ideal.

  Does anyone else have this problem?  And if so, were you able to fix it without uninstalling the update of windows 10 birthday?

  In case it is relevant, here are the specs:

  i5 - 6600 k using onchip graphics

  32 GB of Ram

  SSD Intel 525 (OS)

  SSD Intel 730 (installation of adobe)

  SanDisk ultra ssd (work space, where images are edited)

  Dell UP2716D, calibrated with the dell software and equipment, associated with the set of good color profile.

  But what I don't understand is how the images can look good on the same screen using windows photo viewer, but look rubbish in lightroom and photoshop?

  Lightroom and Photoshop are insured, which means that they use color profiles embedded in images and the color profile associated with a calibrated screen to faithfully show accurate colors. So if the display color profile has been removed or altered, they won't be able to display correct colors.  The Windows Photo app, on the other hand, is not color managed, so it doesn't matter what color profile is associated with the screen, since it won't use it.

• Toner cartridges HP LaserJet M1132 not delivering full capacity

  I have a LaserJet M1132 MFP bought last week. USB connection, OS is Windows 8-64 bit. Have upgraded to the latest firmware. Driver is the latest driver for Windows 8. The settings are default (fastres 600).

  When using the cartridge provided initial toner with the device, it delivered only about 250 pages of text (text of the note and no graphics) before he missed. I know because I bought three reams of paper when I bought the camera and used half of a package. Coverage was about 50% per page, double-sided. I took and he trembled, but this made no difference.

  I bought two new original HP CE285A cartridges as I bought the printer. I was wondering if the original cartridge was a reduced capacity cartridge. So I installed a new cartridge. The toner light came after printing 935 pages (from the status page). Once again, the majority of them were text pages to 50% coverage double-sided.

  Each cartridge is £75, resulting in a cost of about 8 p/page page (not counting the cost of the printer) that is outrageous for a laser printer. Packaging estimates approximately 1,500 pages per cartridge, but I clearly did not get anywhere near this with the first cartridge and I don't get that with the other or the other. I have an another HP MFP (3500), which delivers about 5 trains before a cartridge runs out.

  I am a very experienced with 25 years in the printing and imaging user and know that estimates assume some coverage. I use a heavy cover. I am very dissatisfied with say the least. Your help and advice appreciated.

  Concerning

  Tony Harris

  The only thing you can do to try to extend the life of the cartridge a bit more, it's allow EconoMode on the print driver.  Most likely, this has been activated on the devices tested for the performance of the cartridge.  I'll include instructions to allow below.  Let me know what happens.

  1. Click on the start menu.
  2. Click devices and printers.
  3. Right click on your printer.
  4. Select Printer Preferences.
  5. Click the quality tab.  It can be labeled as the paper/quality tab.
  6. Click the box next to EconoMode to enable it.
  7. Click on apply to save the changes.
  8. Click OK to close the window.

• How can I use HP 2605DN printer black when color toner cartridges are empty?

  Is there a way I can use my 2605DN strictly as a printer laser black when all or part of the color toner cartridges are empty?  I like the quality of the HP 2605DN and works 99% of my black print.  Thanks for your help.  John O.

  You must change the option replace supplies of "stop out" to "ignore the.

  Go to the printer and use the buttons to select as follows:

  the system configuration->-> supplies to replace print quality

  Change to "stop out" to "ignore the.