Quality of the camera

Similar Questions

• Quality of the FaceTime camera on 5 k iMac

  Hi, just got a new 5 k iMac, I was wondering if people have found that the camera built-in facetime / Skype is not too big, I'll upload some pictures later found last night that the quality of the camera is OK, but not very clear...   This is not my first goal for the iMac but wanted to know if it was a common experience?

  The camera is what it is but you could improve things with best ambient light. Cameras tend to look more clear with the bright light.

• Encoding with HV20 in PPCS3: poor quality at the rate of 1 MB

  Hello

  When I encode my video of my hv20 (1920 x 1080-30 p) with PPCS3 using H.264 with debit 2 MB I get very good results. However, when I choose 1 MB video quality is very pixelated and distorted.

  When I use my Panasonic HMC-150 I can encode the same settings, including the setting of flow of 1 MB and with excellent results.

  Is the difference in quality with the camera or the h.264 coding?

  Any ideas why the quality deteriorates 2 MB 1 MB so badly. I would like to play these videos on the internet, so I prefer 1 MB because of the playable speed.

  Thank you

  Simon

  I haven't used these dimensions that you tried, so I can't tell from experience, but try both a standard resolution like 640 x 360 and yours and then decide which is best.

• Send to compressor: how to choose the camera

  Hello

  I apologize if this is a really stupid question, I'm quite new to Motion 5.

  If I am not mistaken, with send to compressor, using the multi-passages option, and other compressor optimized parameters will result in the export of better quality, if this is true, it's the method that I would use for my final exports.  (If I'm wrong, please correct me and let me know which will give the best final ProRes 4444 60 fps 1080 p export - I then import them using FCPX and do a little cut etc, then exporting to h.264 final 60 fps 1080 p).

  Anyway, to my question, how choose them which camera I want to export?

  I choose 'Export using compressor settings,' and then I give myself the opportunity to choose which camera, but I no longer like the options of compressor, where I can choose to use multi-pass and all other settings.

  I tried selecting the camera that I want to export, and then "Send to compressor", but that does not work, it does not use the camera, I chose.  I have a total of eight cameras, so to choose which device I export is quite important for this odd project.

  The answer could be made obvious, once again, I apologize if this is a really stupid question.

  Thanks in advance for any thoughts.

  (Motion 5, compressor 4, El Capitan)

  If you use 'Export using compressor settings' this essentially load presets created in compressor without going into the application, so it has minimal options for adjustment.  What you want to do, you should be able to create a preset in compressor with the settings you need.  Then moving when you use "Compressor to help export settings" select your preset and in the Render tab, there is the section of 3D rendering, you can select the camera you want to copy.  By default, it should be 'Active Caméra', but you can select your other cameras as well.

• How can I access the original RAW file from the camera of the Iphone?

  Hello community. I work with professional photography. I talked to my colleagues for the quality of the pictures we take with our Iphones.  There are many filtering and strengthen and interpolation in the original photo app process of apples. I wonder if there is a way to access the original raw data to the chip in a camera of the iphone (from iphone iPhone 5 6 for the next Iphone.) I think that a lot of people engaged in photography smartphone could benefit from accessing the original raw (not emulation, no simulations) files.

  I appreciate your answers.

  Currently on iOS 9, you can get the RAW of the stock camera app, or any other application photos. However, the app '645 PRO MKIII' did take pictures and store them in unprocessed TIFF formats, which is as close as possible. However, Apple is expected to push back the FIRST support in iOS 10 with third-party apps, no word on the stock soft well.

• Cut a file .mov without loss of quality on the iPod touch

  Hello

  I have a new iPod touch 64 GB with many clips of film (long).

  Soon, I'll run out of space!

  How can I adjust the .mov files (which are too long) on the iPod

  without quality loss?

  Do I need a special app for this?

  Thank you.

  You should be able to do it directly from the camera without a third-party application. See http://www.betterhostreview.com/cut-videos-camera-roll-iphone.html for an example. Personally, I would backup the originals to a computer first.

  TT2

• quality of the photos off ipad

  just an answer about the quality of the photos printed from my iPad mini.  They have been printing too dark) printed just the same images from my PC and they came out good. So I'm still looking for a solution to this problem. My printer is brand new. Epson expression 530 XP.  Anyone got any ideas on the problem. Sorry to be a bother. But there must be an answer to this problem.

  You may need to adjust the settings of the printer on the iPad-

• Satellite R630-13U - quality of the Webcam is not good

  Hello

  Toady, I just bought Satellite R630-13u and I tried to use the built-in webcam, but the quality is vey very poor, even in the right place of light. I tried to call my self through Skype iphone and my laptop, the quality of the image in the iphone is larger than the cell phone!

  I'll take the comture downtown sevirce to check that there should be some settings to adjust or a sticker placed on the camera where I can not remove it?

  your help is appreciated int his case

  concerned,

  Hello

  It's not easy to talk about the quality of the webcam without seeing and you shouln t compare the quality of the webcam with different products. The built-in webcam is very small compared to USB webcams or very practical cameras.

  But you can improve the quality of the webcam: I found an interesting article about it on the Forum from Toshiba:

  Internal bad quality of image when using the webcam in the Dim light
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  How to change the settings for the built-in webcam If the image is very dark or black
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

• Video quality of the first transformer TF201 ASUS

  I searched through the support network and can't seem to find a solution to the issue I'm having. So here:

  I'm running a first processor ASUS TF201, updated to the most recent version of the ICS (4.0.3).

  Version of the camera is TF201 - 0 x 9900

  Kernel is 2.6.39.4 - 00003-g12de84f

  Build number is IML74K. US_epad - 9.4.2.21 - 20120323

  I installed Skype for Android today (May 5, 2012) since the game of Google. It does not show an available update after installation.

  I am able to use Skype, audio/video... video calls (front and rear cameras) and audio work (using the loose term). Latency is less than 1 sec, but audio and video are synchronized, is acceptable. The problem is that the video quality is EXTREMELY poor, but only when using Skype. There no visible difference in video quality when going from the front to the rear camera... which is strange given the large difference in the qualities of the two cameras, there should be at least SOME difference in quality.

  I also Webcam installed on my first IP and webcam7 installed on my desktop, the video quality is remarkable when using of IP Webcam/webcam7 to test cameras.

  Is there a fix for video quality on the first? I see that other people report a 'green' screen with ICS, but I don't have this problem.

  In the images below, the first is the front camera, the second the camera back. In the two images, the magnified image is the premium, is the smallest of my office.

  Image 1:

  

  Image 2:

  

  Please notify. Thank you.

  

  Good news! With the new update of Skype, the issue seems to be fixed. Thanks Skype! Now I can enjoy video skyping of good quality.

• Image problems with the camera on the Satellite A200 - 14 d

  2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

  Anyone know what the problem with my camera? Please help me because I do not know what to do...

  Hello

  As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

  But you can change some settings to improve the quality of the image
  Check the options in the "Assistant camera".
  In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
  The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

• Is it possible to manually select the images that you want imported from the camera?

  original title: SLR digital import question

  is there a way to choose which images get imported when importing images from my Canon t2i to my laptop? most of the photos on my camera have been imported already and filled my hard drive, so I transferred to a portable hard drive to expand the memory and allow for me to continue to load/save my photos. I want to download only the pictures at the end of my memory chip, essentially without having to wait a long time for the other 300 + pictures to import the big file for each and the jpg version, accompanying all over again because they are mostly high-quality... (I keep the actual chips with pictures on them as a backup (have not printed on most of the photos I had even for albums, etc. so I don't want to lose anything by deleting after you import each time, because they are all the memories with my husband and 2 children..))

  is there a way to choose which images get imported when importing images from my Canon t2i to my laptop? most of the photos on my camera have been imported already and filled my hard drive, so I transferred to a portable hard drive to expand the memory and allow for me to continue to load/save my photos. I want to download only the pictures at the end of my memory chip, essentially without having to wait a long time for the other 300 + pictures to import the big file for each and the jpg version, accompanying all over again because they are mostly high-quality... (I keep the actual chips with pictures on them as a backup (have not printed on most of the photos I had even for albums, etc. so I don't want to lose anything by deleting after you import each time, because they are all the memories with my husband and 2 children..))

  ===================================

  Something to try...

  Connect the device to your PC via a USB cable and turn
  on the camera... If open windows... Close them.

  According to... to... Start / my computer... the camera can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / desktop media slots...
  Drive should be listed under... "Removable disk" with a drive
  letter.)

• The quality of the video on my T5 1200 D Rebel is really poor. How can I fix it?

  I wanted to buy a camera for videos, but I noticed that the video is pretty grainy when I tried to draw.  I have a T5 1200 D rebel with a 11 to 55mm efs lens.  I don't know how to fix the image quality.

  "My settings on the camera are 1920 x 1080 at 24 fps."

  It's a pretty decent image for this resolution.  Everything in the field of vision so far, nothing's going to look tack sharp when you zoom in so close that you can count close to individual pixels.   [alias pixel peeping]

• Quality of the webcam on C720-2848

  The quality of the webcam is not very good for something marketed as having an "HD webcam.

  It seems pretty grainy, almost as if there is some sort of "oil painting" of the applied filter.

  There is another user who sees the same topic, see here: http://www.reddit.com/r/chromeos/comments/1vhbpg/acer_c720_webcam_quality/

  Are there drivers, or something that needs to be updated?  I just tried a wash of power without change.

  The camera of the Chromebook C720 is 1.0 MP HD webcam. Looking at the photo published on Reddit, it seems to be in line with what I would expect of a 1.0 MP webcam. If you feel that your camera has a real hardware problem, you can contact technical support in your region for information on repair.

• Can we get the source code for the camera?

  Can we get the source code for the camera? Including libraries? CM is great, except that the camera is not well polished, and the quality of the stock ROM Sony are much better.

  probably more likely questions and restrictions of copyright

  inspect the developers space

  http://developer.sonymobile.com/

• The camera resolution

  I bought the Sony Xperia Z5 because of the excellent image quality when it comes to the camera, I set the 23 MP resolution to get the best out of my photos.

  To my shock and surprise of many of my pictures are shot in low resolution (8MP) cam for a reason because any will automatically switch to that resolution without reference to me, even after adjusting it the first time that I've faced this problem!

  If you set a higher resolution than auto, i.e. the quick resolution of this launch will shoot.