Query data cards

Similar Questions

• INTEX data card has stopped working

  Hello friends, kindly help me to restore my INTEX dongle, it stopped working. An image and the screenshot of the dongle and its causes is uploaded here for more understanding and clarity of the problem.

  1. AN IMAGE OF THE DONGLE

  

  

  2 capture SCREEN PLUG AFTER THE DONGLE IS CONNECTED WITH THE PORTABLE - when the dongle is connected with the laptop, it seems to be as shown below and cannot go any further.

  

  

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that this data card Intex has stopped working. Let me ask you;

  • Remember to make any particular changes in settings?

  According to the guidelines of the screenshot of the error, it seems there could be a conflict of third party software. I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  If the problem persists, you can also consult the manufacturer of the device to check all the parameters.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Not getting data card not detected

  I have the Tata photon + data card used on Windows 7. But one day he did not connect properly due to Server error. I uninstall and start reinstalling. But it did not install correctly and I had uninstalled. Overnight when I connected to the port, it only shows any notification of its connection. When I have not fix the problem, it will show huawei mobile connect device driver has failed/missing.  My data card works well on other systems. Please give me the solution of this problem.

  Original title: data card installation/connection problem

  Hi rose,

  Thanks for posting your query in Microsoft Community.

  We need following information so that we can solve the problem better:

  1. What all the troubleshooting steps have tried?
  2. The problem is specific to the data card? You are able to use other usb devices?

  Try to connect to the data card on a different USB port on the same computer, then check if it works.

  You can try the following methods and check if they help:

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-7

  Method 2:

  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Problem with win RT version it not support data cards

  Dear team,
  Pls help me to solve this problem, as I am not able to connect all data cards...
  I got to know this victory that RT is a not supports any third-party software. If this is the case, then what is
  the solution for my problem...
  Waiting for your answer...

  Hi Rajkumar,

  1. what exactly happens when you try to connect the data card to the device?

  2. What is the brand and model of the data card?

  I suggest for the link and follow the steps in the article:

  Mobile broadband from end-to-end

  http://Windows.Microsoft.com/en-in/Windows-8/mobile-broadband-from-start-to-finish

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Failed to connect Mobily Connect 4 G data card

  Original title: Internet on the data card

  When connecting my mobily Connect 4 G data card, I get the following on the failure of the connection

  Problem event name: BEX

  Application name: Genie.exe Mobile

  Application version: 0.0.0.0

  Application timestamp: 4f914d20

  Fault Module name: Genie.exe Mobile

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 4f914d20

  Exception offset: 0007235f

  Exception code: c000000d

  Exception data: 00000000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 2057

  Additional information 1: 4d4c

  More information 2: 4d4cb9a6d35aafe6e175464c625dd3c8

  3 more information: c4b0

  Additional information 4: c4b06111e79101384dc45b79bff6bf49

  Left OneDrive forum Windows 8.

  Hi Krishnan,

  What operating system is installed on the PC?  I am currently moving to forum Windows 8.

  It seems to be a problem with the software installed for the device or third-party software is in conflict with this device.  Mobile engineering does not (not confirmed) seems to be a software provided with this unit.

  Kindly, follow these methods and check if that helps.

  Method 1:
  Troubleshooting of hardware and devices
  The hardware and devices troubleshooter can detect and correct errors and incorrect settings in devices. You can view these steps to run this utility for troubleshooting:
  a. press the Windows key + X set, select Control Panel
  b. change the option on the top right large icons view
  c. click Troubleshooting , and then click show all on the left panel
  d. run the hardware and devices Troubleshooter and follow the on-screen instructions.

  Method 2:
  If that does not help, please uninstall Mobile engineering and then try to configure Mobily connect 4G data card.

  To uninstall the software, follow these steps.
  a. press Windows key + X set and then click CControl Panel.

  b. under the notice of:, choose large icons and then tap or click programs and features.

  c. click on the software and then click on uninstall. Follow the instructions on the screen.

  See the article:
  Uninstall, change or repair a program
  http://Windows.Microsoft.com/en-CA/Windows-8/uninstall-change-program

  I would also say to post you your query in the Mobily Connect support forum.
  http://www.Mobily.com.SA/portalu/JForum/forums/list.page

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Update of data cards

  Hi all

  We want to update the maps of data via the API. The only way I see (please let me know if there are other ways to do so) to update data cards is REST in bulk API imports. To the help to save the import settings (created with https://secure.eloqua.com/api/docs/Dynamic/Bulk/1.0/Import.aspx) and it seems that, after that some time, imports or job rarely stop. Saved import settings work without fault when it is new, and usually after a week aren't reliable and data cards not updated. We can create them dynamically, before each update query, but it looks like there are hundreds / thousands of daily operation and we ask if creation of so many parameters does not affect functionality / performance. However, I would like to know if this setting is supposed to expire after a certain time? Data cards set fields or other properties do not change and the setting still seems to stop working on its own.

  Thanks a lot for any help / advice on that.

  Adam

  Hi Adam,.

  When you create the definition of import, you must explicitly specify the number of seconds to keep the data. When you have filled a value (secondsToAutoDelete) in your request to create, you should see the same value returned in the response.

  I hope this helps.

  Thank you

  Fred

• Using the Eloqua.API to write to "Custom Data objects/data card Set.

  Does anyone know where there are examples for data objects programming customized via Eloqua.API, I created 2 custom data objects and you now need to write the code for these objects via the API. The examples of code that I used for the previous tasks such as create a contact, create business, update contact and company, describe the entity... I used the following link to complete the previous, above the tasks mentioned.

  http://www.eloquatrainingcenter.com/Portal/documentation/API/default.htm

  However, I don't see anything about the programming of a "Custom Data object/data card Set"

  Joey

  Hi Joey - looks like you you will first make a. Query() call using the name or the GUID personalized criteria, then the returned object, you can retrieve the Id property that will have the whole you need.

  Without this whole you will not be able to correctly map the data card.

• Toshiba crash with 3G data card

  Hello

  hope someone can advise. I've been using a Vodafone 3 G datacard in my PCMCIA slot in my Toshiba Satellite A75-S226 [purchased in the USA] - unfortunately on the first night of use - it has been problematic.

  at first, I loaded the software and inserted the card and hey presto, I was online on the wonderful web without a phone in sight line.

  After only 20 minutes - the pc crashed - complete blackout - rebooted as I thought it was a stop of the battery (not on the AC at this point).

  It wasn't. 12 the cell breaks down - screen sometimes black, sometimes white screen - in almost every use of the card 3G - sometimes, it crashes when the card is inserted, sometimes it works and I'm in line for one minute (or 5 or 10 or 15 - who knows) but it still crashes

  I removed and re installed the software several times, spoke with vodafone and installed 3 alternative versions of the software - 2 old and more recent 1 (later).

  I tried another card 3 G on my laptop and it crashed. I used my card on the pc of my neighbour without difficulty. ERGO - the problem comes from my pc - and it is an interaction with the vodafone card and/or its software.

  This isn't somehow due to overheating, as the shutdown problems mentioned on other threads seem to indicate - if my laptop runs perfectly and can run for hours to child's play.

  I'm not sure is the extent of the use of 3G data cards, but maybe someone can advise.

  PS I am the person most untechy to join a computer forum - so less jargon and more explanations would be useful - think of me as your old uncle doddery, but with more hair

  concerning

  stoky jed
  London

  Hello Jed

  Unfortunately, this is a specific problem with external Toshiba no product, and in this case, I believe that Vodafone people have a lot of experience with troubleshooting. Try to contact them.

  Otherwise, you can use advanced search option and search using the word VODAFONE. As far as I know there must be a few topics with the same or similar issue.

  You can also check the knowledge base on http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2 Toshiba site and Vodafone as searchtext. Check it please all documents. I hope that you will find useful information.

  Good luck!

• Sat Pro A60 - screen backlight turns off after the connection with the Vodafone 3g data card

  I have a Sam Pro A60 which took a mounted Vodafone 3g data card. It connects OK data card but then the screen becomes 'empty' you can see the icons if you get the light from the window in the right direction, but permanently unusable.

  A reboot and the screen comes back. Are there keys, I can try to put light or ideas to test if it's a hardware or software problem?
  Thanks in advance.

  Hello

  It s a very strange problem. But I'll try my best ;)

  I noticed a similar problem on my second book. The display light didn't stop but the blue screen of death (BSOD) appeared and I could not continue my work.

  After a lengthy investigation, I found some useful tips.
  Someone told me that I have to disable HT technology (Hyper-Threading Technology) in the system BIOS settings.

  It's a key!

  As I remember the Satellite Pro A60 also supports this Hyper-Threading Technology.
  You can disable this function in the Toshiba HWSetup tool, in the CPU tab.

  Check it out and maybe it's a key as in my case.

  Dude good luck

• Data card Vodafone made black screen

  I started using a vodafone data card to access the internet, but if I connect the screen goes black and I can't see anything, can I do to solve this problem.

  Hello frome

  In my opinion you should at first contact Vodafone support and ask them if this problem is known or not. If you use Toshiba devices try to contact manufacturer first. They have more experience in troubleshooting.

  Good bye

• PROBLEMS WITH 3G DATA CARD OR GPRS CARDS - 10 ERROR MESSAGE

  Hi all, just found this Mobile tech support 3. If you try to install a 3G data card or any other card GPRS, before we do, please go to the control panel > system > hardware devices and disable the Toshiba Blue Tooth device. Next, install your datacecard/GPRS card.

  Once you have installed your GPRS card / Data, you can then re-enable your blue tooth.

  The reason is that blue tooth comms channel will be hogging the resources for that.

  Thanks to Peter @ 3 Mobile tech for this support.

  Good navigation

  Hello

  Thanks for posting!

• Satellite A200 - Sierra data card is not working properly because of the com port

  Hello

  I recently used a sierra on Satellite A200 computer laptop data card and devices Bluetooth is to share with the data card com port and lead to the client cannot find the data card.

  I tried the data card in lenovo t61 and another computer laptop manufacturer, all of them are working properly.
  The question seems to casue of the Satellite A200 laptop.

  Everyone meets it or advice please!

  Thanks in advance!

  Hello

  The data card Sierra uses the same ports com as the internal module of BT?
  Well, in this case, you have an opportunity:
  You can assign the different port com on the data card Sierra

  Check if this is possible in the Device Manager.

  On the other hand, you can try to install first the data card Sierra, then BT stack
  Perhaps it would be too much work

• Data card Micromax displays do not eject option

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  I use a data card Micromax. When I run it, there not showing the Eject option. I had tried uninstalling/reinstalling before LAVA USB Modem.exe. But I don't get the result. Please help me.

  Take a look at specific articles

  http://www.techf5.com/903/safely-remove-USB-Hardware-icon-missing-from-taskbar/

  http://www.Raymond.CC/blog/archives/2007/12/30/restore-missing-or-disappeared-safely-remove-hardware-icon/

• Error when installing the data card Internet of 1158

  While installing data card Internet provided by BSNL in India (3G version) on my laptop (Vista Home Premium - 32-bit), I get the error code 1158 and nothing else is displayed in the dialog of error except an OK button.  While trying to install it on my desktop (Vista Home Premium - 32-bit), it worked fine.  So the problem is with my laptop.  Could someone help, please?

  Hello
   
  Try installing the data card to the clean boot and check.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How to use the modem (2 Mbps) wired ADSL & 3G data card services to large internet wireless broadband (7 Mbps) in Windows XP at the same time?

  Hello
  I have a (2 Mbps) wired DSL modem and internet connections broadband wireless (7 Mbps) of 3G data card.
  When I use these internet services individually, they work very well.
  I like to use these services wireline & wireless internet connections at the same time, so that I get the total speed of 9 Mbps.
  When I connect and try to use these internet services at the same time, I can't go through it.
  Please inform how to configure Windows XP to do this?
  Thank you
  -to swim.

  Hi dswam,

  Please provide your comments on the design of the Windows network. If you want to see several internet connection option in the future versions of Windows, you can submit your comments here.