Question about a stay of the RAM size

Similar Questions

• Satellite L10-205: the RAM size has really questions?

  My Satellite L10-205 received just 256 MB of RAM. What I do or is it necessary to increase the size of the RAM. What is the best size to speed up the performance of my laptop. Can someone give me tips, please thank you.

  Hello

  Well, the high memory value gives you portable more performance.
  The fact is that the new software needs of more memory. As much as I know this laptop also shipped with shared memory graphics card. In your case if the graphics card uses 64 MB main memory if the software can use only 192 MB.
  In my opinion the laptop should a min 512 MB.
  You can upgrade your laptop with PC2100 DDR - RAM maximum. 1024MB.

  These modules are memory compatible:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)

• Question about warranty after exchanges of RAM on Satellite module series

  Hello together,

  I have a question about the warranty. My laptop is 5 months old and now I want to improve it with more RAM. I want to do it myself, and now I'm wondering if the warranty will be getting hurt.
  Thanks in advance for your answers.

  Concerning

  TiG3r

  For new models of laptops the RAM upgrade described in s operating manuals. It is public act and it shows the owner of the notebook how do RAM upgrade only.

  If Toshiba offers something like this he won't have the negative influence of valid warranty.
  Buy a compatible module and RAM upgrade.

  Bye and good luck!

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• Protégé M200: Question about Vista TPM and the Bitlocker

  You want to know if I have a TPM chip to launch bitblocker on the M200 using Vista. Just call Toshiba Technical Support - the guy was totally distraught!

  If I don't have a TPM chip, then I can install it?

  Hello

  It is a good question. To my knowledge the Portege M200 does not support TPM but the Portege M400, R400 module and the R200

  But the Bitlocker, which is only available on the Vista Enterprise and ultimate can also be used without the TPM chip but then some functions are not available; for example, the SecureBoot.
  Without TPM only the OS volume encryption is available.
  In this case you can encrypts the entire Windows volume including both data and file system user, the file of hibernation, the page file and the temporary files.

  Using volume of BONE (HDD) encryption an encryption key will be generated. This key will be written to the USB and then the USB is required!

  AFAIK the Bitlocker requires 2 partitions. A partition must be created as needs at least 50 MB primary partition. I recommend a? about 1.5 GB
  The second big partition Vista can be installed.

  After the installation of Vista the Bitlocker must be enabled in Group Policy (units without secure TPM). This can be done using the command 'gpedit '.
  And then under models of administration-> windows components-> Bitlocker bitlocker function can be activated!

  Anyway, there is much information Bitlocker and I think you should also consult the Microsoft Web site for more information:
  BitLocker Windows Drive Encryption step-by-step guide

  I hope I could help a little

• I have a Photosmart C7280 and s question about a decision of the network.

  I currently have two workstations connected to a router via ethernet cables.  They are connected to a single (not HP) printer with USB cable through a USB switch.  Two laptops to connect to the wireless router.  I could replicate the existing configuration with the C7280, but the idea of a network in which the laptops were allowed to participate is very attractive.  One of the laptop is running Windows version 7, the other computers running Linux.  If I go for an ethernet network, the laptops will be able to connect to the printer via the router?  If I go for a wireless network, desktop computers will be able to connect to the printer via their ethernet cables?  A couple of Wireless USB adapters are a possibility.

  I understand that you have questions about networking with your printer.

  Yes, wired network connections will be no problem to connect to a wifi connected printer.  Most routers bridge cable and wireless to work as a single network.  There are some routers between wired and wireless networks, but these are before any company grade routers and network equipment.

  A wired desktop computer will be able to print to a wireless printer as long as it is connected via the same router.  Conversely, a wireless computer can print to a printer connected Ethernet as long as it's the same router.

  I recommend using a network for the printer configuration, if possible, to avoid printing problems.  USB hubs have been known to cause printing problems, although this isn't always the case.

• What is the RAM size, buffer and flash, a PC 6224P

  Hello!
  I need to know what the RAM buffer and the size of the memory, switch Dell PowerConnect 6224P Flash.
  Let me know.
  Kind regards!

  Hi lasandroLopez,

  The size of the RAM is 256 MB. Flash memory is 32 MB and the packet buffer is 6.1 Mb

  http://www.Dell.com/us/business/p/PowerConnect-6200-series/PD?St=+PowerConnect%20+6224&DGC=St&CID=265502&lid=4830539&ACD=1230980794347400

• Question about rom 9900, override the method object failed

  Before I update the ROM (9900jAllLang_PBr7.1.0_rel2435_PL5.1.0.622_A7.1.0.862_AT_T.exe) for my 9900, I can easily overrides the method of object to change text styles or field label, for example the size of the font, color of the text and so on.

  But, after update, I can always control the color of text, except the font size!

  I can make sure my codes worked properly 'before', I think this must be a problem of system because all my apps cannot resize the font size more!

  Is there any other way to solve this problem? I need your help, thank you! ~

  Code looks OK, but I would like you to try something.  Can you please set the font for the LabelField rather than change the paint of duing fonts.  Then change this:

  LabelField = about new LabelField ("about aid and", USE_ALL_WIDTH |) LabelField.ELLIPSIS) {}
  public void paint (Graphics g)
  {
  g.setFont (Font.getDefault () .derive (Font.BOLD, Font.getDefault () .getHeight (Ui.UNITS_pt) + 2, Ui.UNITS_pt));
  Super.Paint (g);
  }
  };

  to something like this:

  LabelField = about new LabelField ("about aid and", USE_ALL_WIDTH |) LabelField.ELLIPSIS);

  about.setFont (Font.getDefault () .derive (Font.BOLD, Font.getDefault () .getHeight (Ui.UNITS_pt) + 2, Ui.UNITS_pt);)

• Several Questions about educational Versions of the software

  Well, I have several questions about teaching from Adobe software.  I will attend school in the near future (now I'm not enrolled in any type of school) and I see that Adobe has huge discounts on "educational software".

  What exactly is the difference between the "commercial" version of a program and an educational version?  Do you need some kind of student card to activate an educational version, or proof that you are in school, or something special like that?  I noticed people unopened sell educational versions on eBay and I heard there is no differences between the software, but this makes me wonder... why the price difference?

  Also, I intend on buying another Mac in the near future - probably for the school.  My second question is - with this software (education), is that I can put programs on my desktop and my laptop, or they won't work on one person on one computer?  I've heard people that serial numbers cannot be activated so many times.

  Last question.  My HDD recently crashed and I lost a good bit of things and had to re - install everything.  If this would never happen again, reinstall all Adobe programs on a hard drive nine?  Or I will meet the all 'serial numbers cannot be activated so many times?

  Very well.  I think about the fact.  Any input would be great.  Thank you.

  -Mike

  In terms of content, there normally is no real difference between the editions of the retail and educational/student. There may be some additional fonts or clip art in the commercial version, but this varies from one version to the other, and a product.

  You must qualify to buy an educational/student version. These qualifications are listed on the Adobe Web site. Normally, you must provide proof of reserve that sells licenses of software for you. You can not buy now for the reason that you will be a student in the future. You must have purchase student status.

  Unlike versions of retail, education/student Adobe versions software are not transferable. Sale of such software 'closed' on eBay must be regarded with suspicion. Adobe resellers do not offer software on eBay sales. The software is either stolen, used (but reconditioned), or pirated goods.

  Most of the Adobe software, including the Creative Suite software, can be activated at the same time on two computers owned and used by a single individual. second computer is usually a laptop, if first computer is a computer at home for students. For retail sales, usually first computer is a desktop computer and the second computer is a mobile computer or at home. Computers must not run the software at the same time. And No, two students may not share a single copy on two separate computers.

  The software can be turned on and off but after 20 or if these cycles, you will need to call Adobe and explain what is happening to get characters such cycles. If you are enabled on both systems and a hard drive or a computer turns off and you need to reinstall the software without having the possibility to disable the system blew, Adobe activation support group normally will be granted an additional activation, assuming that you do not have a record of abusing the privilege (as your hard drive breaks down once a month!).

  -Dov

• Question about a post on the forum, help

  http://supportforums.BlackBerry.com/T5/Java-development/XML-parsing-using-DOM/m-p/545678#M110568

  can someone please see post above.

  My question is this code point, the synchronized block startng.

  Which is the right place or it should be as below.

   Object obj = Application.getEventLock();
       for (int i=0;i
  Thanks in advance
  			 
  The synchronization is needed by updating the user interface.  You should like few other things as you can while holding this lock.  I think that the way you have it properly.
  That said, I would recommend that people do not use this approach.  In addition, it is an expensive way to add fields to the form.  By adding this, you cuase the screen available for each field that you add.  You do better something like this:
  VerticalFieldManager newVFM = new VerticalFieldManager();
  for (int i = 0; i)<>
  {
  
          
  Node value = list.item (i).
  getChildNodes () .item (0);
  _node = List.Item (i) .getNodeName ();
  element value = .getNodeValue ();
  METTREAJOURCHAMP (newVFM, _node, element);
  }
  {Synchronized (application.getEventLock ())}
  _SCREEN. Add (newVFM);
  }
  ..
  ' Public Sub METTREAJOURCHAMP (VerticalFieldManager newVFM, node of the chain, string element) {}
  String title = "SectionName".
  newVFM.add (new RichTextField("." + élément));
  {if (node. Equals (title))}
  newVFM.add (new SeparatorField());
  }
  Edit: Corrected according to the following post.  Thank you
  		   

• Question about resizing images in the photo gallery

  I have a bunch of pictures that are different sizes and I am trying to modify them so that they are the same size. I tried their resizing, but it evolves down to sizes of origin there (which are different). This is they way I can edit these photos all at once and edit them to all be the same size photos when I copy and paste someone else. Any suggestion would be appreciated.

  It is true that resizing is dimension applies to the largest dimension on a file in Portrait or landscape mode,

  It is not an easy way around that because of this restriction / you can't dictate or see the two dimensions on this page of resizing.

  Design flaws.

  However, you can change a portrait to landscape using the culture and the lower part of the Crop button has rotation framework that will pass a part in landscape format, including the resizing function will resize itself with files using the correct size now.

  

  You might even be able to test with the Proportion for best results?

  

• Question about high latency of the processor

  Hey there,

  Hoping that someone here is able to help me with a high level of CPU Ready I see in one of my groups.

  Our cluster specification:

  8 guests - ESXi 4.0

  Dual - core Xeon 6 per host

  72 GB memory per host

  DRS and HA on

  Resources to its customers:

  32 guests (4 per host) with 4 vCPU and 20 GB of memory (use ave is 15 to 17 GB)

  The guests are Win 2 k 3 servers. Most traffic is read traffic and traffic - based application and is busy. Load of the CPU on each host is about 40-50% to the total of peak, but guests are higher than I think we should for the time loan CPU. See the chart below. I was wondering how concerned I should be at the ready time CPU?

  

  My first thought is that if the server has 12 hearts and we have 4 guests each asks 4 vCPUs in time with an activity semi busy, then we'll always see higher than normal loan of CPU time. Mainly because there is always one of the guest who has be waiting for the moment on the processors. So assuming that it is correct, if I was to lower the number of CPU 3 on each client (or maybe even 2), I should actually see the loan CPU time go to zero without affecting the performance of comments? maybe even win a few performance?

  Just check my logic here. Making sure that I'm not crazy (which my wife would probably).  :-)

  Thanks in advance!

  -Adam

  The rule is that whatever it is ready by more than 10% * by vCPU * is bad, if with vCPU you will get higher numbers, so its nothing to worry too much.

  Jason Boche said it is much better that I did

  http://www.yellow-bricks.com/2010/01/05/ESXTOP-valuesthresholds/comment-page-1/#comment-5861

  are you really an application performance problems?

• Equium A60-692: Question on the RAM size

  I have an Equium a60-692, which indicates that she has a 256 MB DDR Ram. When I check the system, he says he has 197 MB of Ram. I am told that this is due to the pilot of the screen using the other 60 MB. Which seems big to me or is this normal? I also find that the machine is slow to start and open programs. Is it because of the limited amount of Ram (197 MB)? An increase in Ram would solve my problem?

  Hi Ron,

  You available RAM is 256 MB, and that the BIOS reserves a small portion for the graphics card. The normal distribution is 64 MB for that you will 192Mo of left RAM for use by the operating system. 64 MB is quite normal for the use of graphics (and is small enough to some modern games). You may be able to reduce the amount (say, at 32 MB) in your BIOS (check allocation UMA).

  Slow loading may indicate that your HARD drive is a grooming needs. I recommend running Disk Cleanup on your Start menu, followed by Disk Defragmenter also in the menu START. This will ensure that you schedule the files and folders are properly located and organized for use.

  Increasing your RAM probably will not help your slow loading problem, although it will improve the performance of games and utilities of great resources by reducing the use of the swap file.

  HTH

  Post edited by: NickyNoogle

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Question about free space on the HDD of the Satellite L150

  I am very disappointed to see that the 250 GB on my Satellite L150 is actually only 109GB because of the partitioned drive.
  I don't remember seeing this on any of the spec in my research.

  I have about 100 GB of image files and the data I wanted to transfer and I do not know what to do.
  I keep all my files image on an external hard drive?

  Would not be a large amount of data on the PC it considerably slow down?
  Or not? Or do I have to keep some of them on the C:\ drive?

  Can another possibility - I get an extra HD for this machine?

  Trenny

  Hello Trenny

  When you open Windows Explorer and click on my computer, which is shown on the right side?
  You have two partitions?

  Sorry, but all the history is confusing. By default (factory settings) the HARD disk has two partitions:
  -C for OS
  -D is free and can be used to save all your data

  If you can use both partitions or not?

  If so please use it. It will not slow down your PC. The performance depends on the performance of the operations, background processes and of RAM available, not on the amount of data stored on the HARD drive.