Question about area with a rug code * a DVD-RAM UJ - 841 S

Similar Questions

• Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165

  Hello

  I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
  After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.

  Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
  I have'nt try every thing. I come here to ask the question.

  Sorry for my bad English

  THX

  You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.

  If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.

  Welcome them

• Question about Threads with WHILE and FOR

  Hi all
  
  I have a question on threads with a loop on this topic sentece.
  
  Have the following class:

  class test{
  
  bool foundThing;
  PararellSearch(string [] lista, string s2find){
  while(!foundThing)
  {
  for(int i=0;i<lista.length;i++){
  if(s2find==lista){
  
  foundThing = true;
  
  break;
  
  }
  
  }
  
  }
  
  }
  If I start 10 threads which are using the PararellSearch method to look into lista, each of them inits into a different point, and when some of them found the right word then set foundThing= true. It will stop WHILE and FOR loop in all the threads? 
  If not, how could I do it?
  
  Thanks a lot for your help.
  David.
  
  Edited by: user13553506 on 27-dic-2010 12:15
  
  Edited by: user13553506 on 27-dic-2010 15:54                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  			 
  When you post the code, you'll want to post a [url http://sscce.org] NBS so that it is clear that what you try to do it. For example:
  1. in the validation of code, put {code} before and after him, then he will be readable.
  2. the convention in Java must start with a capital letter class names, so test, could not test.
  3. the convention in Java is to start with lowercase letters, so parallelSearch, not PWhateverMisspellingYouHaveThere method names.
  4. There is no such thing as bool. It is a Boolean.
  5. it is a String, not string.
  6. never use == to compare the States of objects (such as the content of the strings). Use equals().
  To answer your question: If you create Test 10 objects, then, given that foundThing is an instance variable, there will be 10 variables entirely independent foundThing. An adjustment will not affect the other. In this case, the easiest thing to do would be to foundThing static, so that there is only one copy which is shared by the Test class as a whole. This isn't the only way, or even the best way in all cases, but you have enough other problems to face, so for now to keep things simple.
  Finally, when you have a variable that is shared by multiple threads, you need to either make all the access to this variable synchronized on the same lock (reads and writes), or you need to declare the volatile variable.
  		   

• Question about Diplay driver and upgrade - Satellite 5200 903 RAM

  Hello

  I ve got an old book of 5200-903 and I m lovin it. I installed the driver Nvidia Support Toshiba Download Page. But I can´t find any display driver again? I m only using the standard Windows Plug and Play Driver? Has anyone found a driver for the display for best results?

  Another question: I want to upgrade my RAM. For now I m using 2 x 256 MB DDR 266 Mhz CL 2.5. What is the maximum that supports the book? A tested person faster DDR RAM? As 333 MHz RAM?

  Thank you for having responded

  > I installed the driver Nvidia Support Toshiba Download Page. But I can´t find any display driver again?

  Sorry but I don't understand what's your problem now. On the Toshiba support page you can find the driver NVIDIA V 43.36 for WXP (listed for Satellite 5200 903). Am I wrong? If you have installed this driver for the graphics card must be properly recognized and listed in the Device Manager.

  So now, I have to ask you once again: what exactly is the problem with display driver?

  On RAM:
  Your laptop can handle with max of 1024 MB. You can use the module 2 x 512 MB. Module of 512 MB compatible a part PA3164U - 1 M 51 number.

  Good bye

• Question about DW CS3 generated CSS code...

  In the attached code of a page, that I am, you will see that the .twoColFixLtHdr class is applied to several areas of the declaration. This class is the only one ever but she is shared with the ID.
  
  The page comes from a DW generated pages, namely the "two fixed column, left sidebar, header and footer." Since I am still a beginner with CSS, I can't understand this.
  
  The class is applied to the < body > tag. Does this mean that all of these CSS statements where appears the .twoColFixLtHdr class is applied to the < body > tag?
  
  Thanks for everything that will inform about it. I have a feeling it's quite simple...

  Tuesday, August 5, 2008 07:52:17 + 0000 (UTC), "brainfillet".
  wrote:

  > I have read up on CSS since the last post (no response from any force "
  (> me to read the book!). I understand now is that .twoColFixLtHdr «»
  "> #container" and others are descendant selectors.

  Yes
  >
  > My questions now, very simplified: it will be OK to remove all occurrences of
  > ".twoColFixLtHdr?

  If it a new site - then yes remove all occurrences of
  .twoColFixLtHdr in html and css
  change
  
  TO
  

  > Also, what is the point of this class, which is never
  > only, but it is only one component of a descendant selector. If I can pull
  > all instances of it (which I guess I can, and the page seems to work
  (> fine), why DW put there when she has generated the original file?

  I asked the same question there not so long ago - and Murray noted quite rightly
  make sure if you use older editions of code
  your site - it ensures that if there are duplicate css examples in
  old code and the model Dw - Dw code has priority (it has a higher level
  specificity).

  --

  ~ Malcolm ~ *...
  ~*

• 2 questions about V2V with Converter Standalone 4.3

  I have an s on esx 4.0 with some VM Windows production environment.  Esx 4.0 host are moving to a new location with scheduled within a few days.  To minimize the impact that I had planned to get up a VM host and V2V temp the VM, then when the original kit back in his new house them V2V.

  I just built a temp esxi 4.1 host and did a V2V test that went ok (ish). The main problem I encountered was that the static IP address is not used.  So my 1st question is: is it possible for a migrated VM keep its static ip address configuration?

  Secondly, will I encounter any issues V2V ing those VMS back to an old version of VMWare is i.e. esxi 4.1 = > esx 4.0?

  not upgarding vmware tools might work around this or it would be perhaps better to stand at another temp esx 4.0 Server?

  Thank you very much

  It works without any problem - there are no traps.

  If you are worried about it, clone a virtual machine and copy the files for the cloned VM, then run it on the new ESX as a test.

  You do not have a lot to focus on

• Question about ASA5510 with AIP10

  I installed ASA5510-AIP10 with on our customer site. But I have 2 problems.

  First of all, I don't see no giga0/1(backplane interface) AIP10 traffic.

  Can I configure ASA5510 configuration? I already configured configuration associated AIP10 group virtual sensor and interface of remote sensing. Unfortunately, I can not all traffic.

  When I entered 'show int gi0/1' 10 AIP, it displays a number of the traffic count is zero.

  Secondly, AIP10 cannot do update of signature on automatic ftp server. When I inspected the package through tool Ethereal, disconnected AIP10 Server ftp after ftp 'LIST' command session is submitted to the ftp server. Maybe, I think that AIP10 didn't present 'Get sig.pkg' after her present "LIST".

  What should I do? Is - this hardware problem of the AIP? I would like to know about the above.

  Kind regards

  Get monitored traffic requires two configuration on the ASA and the SSM.

  It seems that you have completed the configuration of DFS.

  Now you need the corresponding configuration of ASA.

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/clissm.htm#wp1033926

  This is more easily by adding the lines of configuration "ips" in your policy map existing on the SAA itself.

  Once the ASA is configured, then the package counts on gig0/1 interface of the MSS should begin to increase.

  With regard to the problems of FTP server with automatic upgrade:

  The first thing to do is use the command 'upgrade' to the CLI to do a manual upgrade from the FTP server. This will ensure the name of user and password and directory settings are all correct for what you're trying.

  Once the manual works, then use the same settings for the automatic update.

  If the automatic update does not work, then check that this directory Unix style listing is used. The automatic update does not work when the style of the output of the Windows directory list is used. It is usually configurable on most Windows FTP servers.

  Also check out the "events to see the" while the sensor is to check the ftp server. The sensor will report on its findings. If he says that no updates have been found, check that you have a new update on the ftp server and ALSO make sure that the updated name is exactly as it appears on the ORC. Some users have inadvertently changed the name or the ftp client changed file names. The biggest problems we have seen is that capital letters are made lowercase.

• Question about images with Bootstrap galleries

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  And a number of questions:

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  Thank you

  John

  jodmcc49 wrote:

  I watched the tutorial, I might add is very nice:

  Bootstrap Modal + Carousel Gallery - http://alt-web.com/

  Thank you to say, John.   I appreciate it.

  1. on the 'DEMO', there are 6 images. All images must be shown or may be just 1 image that when you click on the modal will load containing the remaining images?

  You can call the modal window to open a single image or a button, if that's what you want.

  jodmcc49 wrote:

  2. If you want to add more than 1 Gallery, do I need to recreate the full tutorial for each gallery? I have 5 different galleries.

  The way I structured this tutorial in particular, you should be 5 modal windows with a unique ID.

  • myModal1 - contains carousel1
  • myModal2 - contains carousel2
  • myModal3 - contains carousel3
  • etc...

  If you are good with AJAX/jQuery, you could call the Gallery carousel appropriate in a single Modal with GetElementByID instruction component.  But it's another tutorial.

  Nancy O.

• Question about backup with VDR 2.0.2

  Hello

  Excuse me for very low knowledge on this argument.

  I have a very simple question. If I made a backup of a motor home on Windows Server virtual machine and I create a folder on this machine between the time where VDR create the snapshot and the time of the end of the copy, when VDR remove the snapshot, the folder will remain on the server? All the changes I made on a virtual machine in the VDR copy will be lost or before to remove the snapshot, the changes will be merged with the original disc?

  Thank you very much.

  Hello

  the disks will be merged. If your changes are not lost.

  The backup however of course only will contain data up to the point when the snapshot was created.

  Concerning

  Tim

• Questions about player with W xp und XP-Mode (2 people)

  Hi all

  I had to install an old programming (EP) in Windows XP Mode environment, because he made more runs on W7prof. In this installation the EP doesn't also run smooth as before on a computer with W xp (host). I would check now if the PE installed on xp W in a VMware Player work better. Before you begin this task on a computer with 64-bit W7prof, I have the following questions:

  1.) is it possible to install VMware Player on a computer where Windows XP Mode is already installed? (I would like to delete the XP-Mode only when I know that the short EP smooth on the VMware Player).

  (2) if the answer to 1.) is Yes: is there any significance if during the installation of the VMware Player Windows XP Mode is active (open) or not?

  3.), it is apparently possible to install xp on VMware Player W using the existing Windows XP Mode. Is this possible if Windows XP Mode is already installed?

  (4.) if the answer to 3.) is Yes: is there any significance if during the installation of xp W on the VMware Player Windows XP Mode is active (open) or not.

  5.) are there any other important aspects to consider, or y at - there somewhere a step by step instruction?

  Thanks in advance for your help.

  To the GATHERING

  If you want you run Windows XP Mode in VMware Player, then Windows Virtual PC and Windows XP stop nearby.  Then, you will need to install VMware Player and VMware vCenter Converter Standalone, installed with the selected (Advanced) Server installation option.  Then in VMware Player, select player > file > import Windows XP Mode VM... and follow through.  Once complete, you will have Windows XP Mode in the list under the House.

  NOTE: The Virtual Machine Windows XP Mode created in this way is a linked Clone and is linked to the file "Windows XP Mode base.vhd" and as such, you can not continue run Windows XP Mode Windows Virtual PC, unless you manually make a copy of the "Windows XP Mode base.vhd" file to another location and then change it properly the DescriptorFile disc shipped to change file 'Windows XP Mode.vmdk' 'parentFileNameHint =' option to point to the file copied manually "Windows XP Mode base.vhd" to its new location.  Note that this work around will not be permitted by the agreement to LICENSE Windows XP Mode, I have no read lately to see if it does not allow for what would be technically be two now also installed separate from Windows XP Mode.

  If you do not make a copy and edit properly the embedded disk DescriptorFile then once you decide whether or not you will not use VMware Player to run Windows XP Mode more then you can remove the Windows XP Mode virtual machine in VMware Player and continue to use it in Windows Virtual PC

• Question about impdp with FULL = Y

  DB version: 10 gr 2
  
  To rebuild a database, we will perform the dump of the entire database to help

  expdp user01/password directory= dpump_dir full=y dumpfile=Fulldb.dmp logfile=Fulldb_exp.log 

  Two questions:
  1. prior to import it, I need to create a basic DB (using DBCA, or manually by using the CREATE DATABASE command)
  with all the storage spaces. Right?
  
  
  2. When you re-create the db, can I create the db in a different name? If possible, should what settings I use?

  Hello

  This statement is not true.

  You create a database, and if the data file directory structure differs from the data source bases tablespaces, you will need to create them also.

  You don't have to create storage areas. If your directory structure is different, you can use the remap_datafile to specify the new structure of the dictionary. It might be easier to create spaces for storage yourself, but you don't have to.

  REMAP_DATAFILE=/Dir1/Dir2/dir3/dir4/DataFileName.dbf:/new_dir1/new_dir2/DataFileName.dbf

  Repeat for each data file.

  Dean

• Question about webcams with Macbook Pro 13-inch, mid 2010

  Bear with me as I am the most fundamental basic Mac users. I am currently using a MacBook Pro (13-inch, mid 2010) with OS X Yosemite 10.10.5 I don't use Skype or FaceTime or something like that. Recently, I joined an online course in which they said I need a webcam, headset and microphone so that I can communicate with my instructor and discussions in class.

  I have really no idea what hardware inside is on my laptop. Is the built in camera something that could be used for this purpose? Or do I need to buy these separately three elements to make this work? And if yes, are you easy to install and can anyone recommend something good, but also low-cost as possible.

  Thanks in advance for your time.

  michellew_ wrote:

  Is the built in camera something that could be used for this purpose?

  Or do I need to buy these separately three elements to make this work?

  Your built in FaceTime, camera is sufficient. This is the idea. outdoor cameras are mostly a thing of the past. If the internal webcam is broken, an external is always an option repair vs.

  You may need their proprietary software to connect to their course however

• Question about fan with Equium A60

  Are these 3 fan cooler units all use with the a60, keeping in mind that these things suck air under the laptop, and this machine tries to expel air in from below.
  concerning Mick

  Hello

  I know that these units. They are really useful and if you have a machine that becomes a kind of warm :) then such a device is always useful. If you really want to buy, please give some report how it works and if you could win a few degrees. :)

  See you soon

• Question about WPA with lan card wireless in a Satellite Pro 6100

  Hello world

  I wish toshiba Australia had a cool site like this... It's fantastic.

  In any case, I just buy a kit (PA3189U-1MPC) wireless lan card for my laptop and network connection problems wireless of the University. The tech guy he says I need to have installed a wpa driver, and then I would be set for the use of bandwidth United.

  Anyone know where I can get a newish driver? I can't find anything anywhere...

  Thanks for any help,

  Jonno

  Hello

  First of all, it is very nice to read you like this forum. ;)

  So my friend from Australia, at first I must say that you use right and compatible WLAN card on your older laptop, but now I have to disappoint you. According to the specification, it is not possible to use WPA encryption with this card.

  Really, I don't think you can solve it with the new driver. I have newer computer Tecra laptop and I've tried everything but to no avail. Best solution for you is to use external USB WLAN stick. It will be much better for you. Initially, you can use WPA encryption and with the new card, you can use faster standard G and download speed will be much faster as with integrated WLAN card.

  Maybe you should think about it.

  Bye and good luck!

• Question about hosting with Adobe

  Question: I have a membership with Adobe Creative, which gives me the opportunity to host 5 sites.   If I exceed this number how much does it cost to host each additional site please?

  After 5 sites, you will have to pay for each site that depend on site map.

  Price: http://businesscatalyst.com/pricing/monthly

  Plans for the site: http://helpx.adobe.com/business-catalyst/kb/detailed-plan-breakdown.html

  Thank you

  Sanjit