Question about consistent errors in the event viewer XP Home Edition

I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

Here is the data for the analysis of files:

V01c Vino event viewer run on Windows XP in English
Report run at 28/01/2012 23:42:23

Note: All dates below are in the format dd/mm/yyyy

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"System" Log - error Type
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Journal: "System" Date/time: 01/28/2012 22:48:06
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: "System" Date/time: 01/28/2012 22:47:40
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 01/28/2012 22:35:31
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 27/01/2012-22:49:54
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: "System" Date/time: 27/01/2012-22:37:21
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 27/01/2012-14:32:57
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 27/01/2012 03:38:23
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 25/01/2012-13:53:36
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: "System" Date/time: 25/01/2012-13:32:34
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 24/01/2012 23:35:59
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: "System" Date/time: 24/01/2012 23:21:10
Type: error category: 0
Event: 29 Source: W32Time
The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

Journal: "System" Date/time: 24/01/2012 23:21:10
Type: error category: 0
Event: 17 Source: W32Time
Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

Journal: "System" Date/time: 24/01/2012 23:18:36
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 24/01/2012 02:15:46
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 24/01/2012-12:58:29 AM
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: "System" Date/time: 24/01/2012 00 h delighteth
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: 'System' time: 23/01/2012 23:26:32
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: 'System' time: 23/01/2012 23:26:19
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: 'System' time: 23/01/2012 23:02:41
Type: error category: 0
Event: 10005 Source: DCOM
DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

Journal: 'System' time: 23/01/2012 18:28:49
Type: error category: 0
Event: 7023 Source: Service Control Manager
Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

Journal: "System" Date/time: 24/01/2012 23:35:59

Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

What are these errors and they are nothing to worry about?

I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

Not sure, but I may have changed a network setting to activate the new hosts file work properly.

Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

XP Home Edition SP3 P4 2.8 2 GB RAM

Joe

Oh yes :)

I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

Some malware will change your GP settings and cause problems.

I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

A shortcut to the event viewer is to click on start, run and enter in the box:

%SystemRoot%\system32\eventvwr.msc

Click OK to launch the event viewer.

The most interesting newspapers are usually the system and Application logs.

Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

Not every event is a problem, some are informational messages that things work very well, and some are warnings.

However, no event should defy reasonable explanation.

Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
Informational messages have white is.  Not every error or warning event means that there is a serious question.

Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

If you paste an event, it will look something like this annoying system startup event:

Event type: Information
Event source: Service Control Manager
Event category: no
Event ID: 7035
Date: 14/07/2010
Time: 17:54:18
User: Jose
Computer: computer

Description:
The Remote Access Connection Manager service was sent successfully a starting control.

To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

http://www.EventID.NET/

If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

Tags: Windows

Similar Questions

  • Error in the Event Viewer system log

    Separated from this thread.

    Gerry,

    Thank you for your response.  It gives me a better understanding than the data stored on my computer that may be able to help me, and you have introduced me into a player.  I've posted the system log here and it includes hundreds of lines.  However I do not know how to make it visible to you.  I checked it to share and the only file that is serious is one that you brought me to download.  Although I have not found the answer to my problem, I found your advice gave me a better understanding about the tools that are available.  Maybe I'll get to understand how to use them.

    Ed Walsh

    Ed

    Please provide more information for your issue to be diagnosed.

    Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

    Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:

    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    General remarks on the event viewer:

    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • Get the error in the event viewer that refers to Repultemtn. How to remove it?

    Original title: Repultemtn

    Every day I receive at least one error in Event Viewer-system that refers to Repultemtn:

    The Repultemtn service failed to start due to the following error:
    The system cannot find the specified file.
    The only trace I can find is the reference to a former pilot of Repultemtn in the registry. When I search online, I don't find any reference to this driver. Someone met by this old driver before?

    I have a last question. The reference to Repultemtn has now disappeared from current control set in the registry, but it is still listed in ControlSet004 and cannot be deleted. Should I be worried?

    Look at the key HKEY_LOCAL_MACHINE\SYSTEM\Select to see what the setting is, if it's a set of failed control, you can skip the whole game, if it's the LastKnownGood game it will be gone once you restart the computer.

    When you start Windows the bootstrapper checks the key HKLM\SYSTEM\Select to see which setting it should load, if 004 is a set of failed control will never be loaded again, if it's the LastKnownGood control set it will be charged only if you use the F8 advanced boot menu and select this option to start the computer to the last good known Configuration.

    After that you start the computer and successfully log on the LKGC is copied over from the set of controls that has been used to start the computer, these entries have been removed from the default (CurrentControlSet) If you restart the computer normally with the control set by default the LastKnownGood (which is a copy of the set of control kick successfully) can no longer contain the entries.  The LastKnownGood game should NEVER be modified manually... otherwise he will not be the same game as the one that was last with success started, that's why in most circumstances you must only change the current setting.  See here for more information about the boot process and control sets and the Select button:

    System and startup settings
    (Written for Windows 2000, but it is the same for Windows XP)

    John

  • List of ERRORS in the event viewer...

    Hello, could you explain to me, what should I do about it?
    All of these errors and warnings...

    Thank you.

    Yes, long closed downs, start-up newspaper very often!

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  • I just installed win 7 Ult 7 days. In the event viewer, I got 1000 errors and I was wondering where I can get help? TY

    I just installed win 7 Ult 7 days.  In the event viewer, I got 1000 errors and I was wondering where I can get help? TY

    And the list continues to become more mistakes as the months go bye.  Usually after 3 monts, my PC slows to a crawl, and I have to reinstall Windows & Ultimate!

    It is very annoying.  I'm not the smartest when it comes to the PC, but I know enough when I have a problem.

    Now, while I was with PC Cleaner Pro, I allowed a representative to take control of my PC to help set, and he went into the event viewer and showed me the error 1007 in

    the event viewer.  He told me that only a technician 35 Microsoft could fix tis problem.

    I would like to know how to solve these problems myself.  If that means classes or tests, I'm ready to get there!

    But for now, I just want to know how to clean and fix the errors in the event viewer

    So if you could tell me please small whet you need to me to help him with this problem, I'm ready

    It's really annoying tio do reinjstall windows every 3 months.  So if you can help, I would be very happy VERY MUCH!

    Sincreley,

    Joseph M Hart

    Errors and warnings in the event logs are not usually a sign of a major problem.

    Unfortunately, there are many technical support providers who refer clients to the event log in order to convince them to pay for questionable services.

    Use of cleaners and Tune up utilities is not recommended. They can often cause problems.

    Use the construct in Windows utilities

    http://www.Microsoft.com/athome/Setup/optimize.aspx

    Ensure that all remote access program is deleted from your computer.

    Use a search engine to find information on all the events that occur frequently, specifying the event id and source, for example search for "eventid 512 capi2. Try to avoid scam sites that are always asked by this kind of research. Stick to sites of Microsoft or somewhere like www.eventid.net which is a good source of free information.

  • Error messages in Event Viewer

    I get the following error messages in EV, please help to decipher and all the solutions, thank you:

    1 - system shutdown prior to 29/01/13 to 18:14 was not planned.

    2 - the system has rebooted without clearly stop the first. This error can be caused if the system is not responding, crushed, or lost power unexptedly.

    3 session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D.

    4 audit events have been abandoned by public transport. 0

    5 - the SNMP Service encountered an error when accessing the registry SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration key.

    6 - the computer has restarted after a bugcheck.  The bugcheck was: 0 x 0000000024 (0x9f693698, 0x9f693270, 0x001904fb, 0x8af32c51).  A dump was saved in the: C:\Windows\MEMORY. DMP.  Report ID: 012913-25890-01.

    7 - the print spooler cannot start because the PrinterbusEnumerator could not start.  Error code 0 x 490.   This can happen due to instability of the system or a lack of system resources.

    8 - custom dynamic link libraries are loaded for each application.  The system administrator should review the list of libraries to ensure that they are linked to trusted applications.

    9 - the next (s) start or system start could not load:

    amacpi

    mssmbios

    I am particularly concerned about #8 - libraries of custom applications loading dynamic links...  (doesn't look good)

    I might suggest that your support align more closely the event viewer, since this is a descrept of the activity log, and that it be made possible to COPY the EV, WHO SHE does APPEAR TO BE POSSIBLE CURRENTLY.

    Anyway, your help to clarify and solve these problems is appreciated.

    Hi Al Adams,.

    Welcome to the Microsoft Community and thanks for posting the question.

    From the description, it seems you are trying to find errors in the Event Viewer logs.

    Files related to the way Windows dynamic link library communicates via the network and the Internet, most often related to Microsoft Outlook applications

    Event logs are special files events important folders on your computer, for example when a user connects to the computer or when a program encounters an error. As soon as these types of events occur, Windows records the event in an event log that you can read by using Event Viewer.

    It would be great if you can answer this question in order to help you further.

    Are you facing any problem with the operating system?

    Reference: http://windows.microsoft.com/en-IN/windows7/What-information-appears-in-event-logs-Event-Viewer

    Hope this information is useful, if you have questions/suggestions more associated with Windows do not hesitate to post and we will be happy to help you.

  • Errors and warnings in the event viewer on the new laptop

    I have a HP 2000 Notebook PC with the product number QE279UA #ABA

    Bought and started using it at the end of December 2011.

    -Since then, I had immediate problems with the WiFi adapter (HP tried to solve the problem by sending a new network card, but the problem does not present yet so I never installed)

    -He had 3 cases where the laptop closed by himself for reasons unknown (he didn't feel not enough for overheating hot, and with it being new, I don't see it being already a reason), tonight being one of them, so when I saw somewhere online read the event viewer, I see as since 22 December 2011 I had 279 errors, 596 warnings. I do not understand one of them of course except the 3 criticals hence my laptop a intestinal shutdown. I have a feeling that these numbers are not good, given only to being less than 2 months old, but I don't know exactly what to ask about what to do. I wish I could have someone to look rather than try to describe the problems through e-mails and forums, but I don't have to spend hundreds of dollars to bring to Geek Squad or the other. How should I proceed?

    Thanks for any info.

    Warnings are normal and can be ignored.

    Mistakes can happen, I have 42 in the last 7 days, but my system works fine. Windows manages quite well the errors, and generally, they are not a problem, but will record in all cases. It takes a trained eye to sort through this and understand if there is a serious problem or not.

    Criticism can be a problem, but looks like they are at the unexpected stop, so no useful information can be drawn from those.

    If you go to control panel (display the icon) and click Action Center, that's where things that go wrong get reported you, if it is clear from all the messages, then you can ignore the event viewer.

    You have a problem with the unexpected stops, they are very difficult to unravel by the normal user and needs professional diagnosis.

    You are under warranty with HP? If you are, you can contact HP on the problem, make sure you have your personal files backed up before instructions from HP to resolve the shutdown problem.

  • Errors are displayed in the event viewer whenever I'm pass user

    Greetings.

    I just installed Windows 8 on my PC and noticed a strange thing. I have 2 local accounts on my PC, and whenever I am pass between them an error message popping up in the event viewer.
    It's always the same:
    The application-specific permission settings do not local Activation permission for the COM with the CLSID server application
    {D63B10C5-BB46-4990-A94F-E40B9D520160}
    and APPID
    {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
    the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.
    And details:

    -
    -
     
      10016
      0
      2
      0
      0
      0 x 8080000000000000
     
      1301
     
     
      System
      PC
     
     

    -
      application-specific
      Local
      Activation
      {D63B10C5-BB46-4990-A94F-E40B9D520160}
      {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
      NT AUTHORITY
      SYSTEM
      S-1-5-18
      LocalHost (using LRPC)
      Not available
      Not available

    I don't see anything wrong in the behaviour of my OS, but these consistent errors in Event Viewer makes me worry a little.
    What could be the cause of the problem? Is it possible to fix it?

    Hello Andrei Kharitonov,

    1. How did you install to Windows 8?

    2. who was the older version of Windows installed?

    Let us try these methods.

    Method 1.

    I suggest you run the utility for troubleshooting Microsoft accounts from this link and check the status.

    http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

    Method 2.

    The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions. To run the System File Checker, you'll need open an elevated command prompt. This can be done:

    • Enter the start screen
    • Press Windows + C keys on your keyboard to show the charms. (If you use a touch screen: touch the right edge of the screen and slide your finger to the center of the screen to display the bar of charms)
    • Click on search
    • Type the command prompt in the search field
    • Click with the right button on command prompt (if you use a touch screen: touch and hold your finger at the command prompt, drag your finger downwards until you see an outline around the tile and finally release your finger on the screen.)
    • Click on run as administrator

    Enter the command: sfc/scannow
    Note: If you use a touch screen you can open the touch keyboard for the command prompt by typing on the keyboard icon in your taskbar near the system tray.

    Let us know if you need assistance with this problem of Windows. We will be happy to help you.

  • The Event Viewer error on startup: "the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E.

    I use Windows XP with AMD processor clocked at 1.6 Ghz and 2 GB of RAM. This error appears in the event viewer whenever my computer starts. I don't know if it's doing any harm. can someone advise?

    original title: the scheduled task of CARPET met a failure during configuration data collection. HR = 0xC004F00E

    Hello Steven,

    Did you ever receive notifications that a virus or malware has been removed from your system recently?
    My only thought is that it is the remains of an infection on your machine.
    It is most likely harmless, but I don't understand why you'd be concerned.
    Do you have any task scheduled to run at startup using Task Scheduler built into Windows?
    I would check to see if there are tasks to run at startup:
  • MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

    MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

    Hello

    Did you change your computer?

    Method 1:

    I suggest you perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to follow the link and check.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

  • I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen. Can someone please explain to me how to solve this problem.

    I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen

    Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.

    You have a problem with a driver Atheros.

    It could be the network card is bad or the driver is damaged.

    If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.

    http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

  • How can I remove all the errors and warnings Event Viewer administrative events, Application & system options?

    Please I need to remove these errors and warnings permanently on my computers?
    And please tell all the ways to get rid of these errors and warnings in Event Viewer... I'm waiting...

    You can clear the logs in the event viewer by going to the various sections, right-click and selecting "clear logs.

    What you can't do, is remove the event viewer or stop newspapers appearing again. It is part of the Windows 7 kernel and is useful to diagnose errors...

  • How to fix a client SSL key private credential error code in the event viewer

    Hi people,

    I hope someone can help. I am currently using Windows 7 Professional 64 bit, updated with the latest updates from Microsoft.

    I get the following error message, ()every 5 minutes exactly) in the Event Viewer administrative, computer management.

    "A fatal error has occurred when trying to access the private key SSL client credential." The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003 "

    It began on October 14, 2014. There are now more than 40,000 of the codes of this edition.

    A sample of the log data is as follows;

    Log name: System
    Source: Schannel
    Date: 18/10/2014-20:54:40
    Event ID: 36870
    Task category: no
    Level: error
    Keywords:
    User: SYSTEM
    Computer: AP1
    Description:
    A fatal error occurred when attempting to access the private key SSL client credential. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003.
    The event XML:

     
       
        36870
        0
        2
        0
        0
        0 x 8000000000000000
       
        133003
       
       
        System
        AP1
       
     

     
        customer
        0x8009030d
        10003
     

    I looked at all the suggestions online and have found nothing of what is specific to this problem for windows 7 and how to solve it. I would be grateful if someone could guide me in the way to solve the problem.

    Thanks in advance.

    Tom

    Dear Isha,

    Thanks for your follow-up. After spending considerable time on the issue, I stopped just by using the function of collective housing, which heals many error codes. It is redundant to a standard network configuration and is not worthwhile. Since Windows 10 deletes the function of group living, I'm not sure that I need to spend time on this...

    I have also had also removed the bad machine key and senior partners of information in the directory of network of peers, which seems to have solved the problem.

    Thanks for your thoughts.

    Tom

  • SecEvent newspaper missing file - access denied error (5) through the event viewer

    After you save and clear logs (more precisely the security log file), I stop the PC.  It is started the next time, I went to read the log through the event viewer, I encountered this error: could not open the event to the event log viewer or custom views.  Verify that the event log service is running or query is too long.  Access is denied (5). (((("I checked that has) I use the admin account b) other log files are fine) 3 the secevent.evt file is not present in the C:\Windows\System32\winevt\Logs folder 4) on the creation of this file (as a copy/past from the application log file and rename it to secevent) the file is not written in.  (5) event log service can be restarted without error. (6) can not clear the security log file, I created.  Error reads as follows: Event Viewer is unable to clear the log.  The following error occurred: access is denied

    Any help is appreciated.

    I ended up having torebuild machine from scratch.  Nothing else has worked. Good luck

  • Symbols of the event viewer and 'Error' or warning

    In the "Event Viewer" window, in the file of the application, there are events 1701. All of these events have a 'mistake' or the symbol 'warning' in the column type.  Is this serious? How did this happen and an average person can solve these erroors and these warnings? Kenny

    OK you return

Maybe you are looking for

  • Duplication of any libraries - any way to merge?

    Hello In my 'Images' folder, I have now two libraries - iPhoto Library and photo library.  Having considered the two libraries there is a lot of overlap and duplication between them, and as they both occupy about 110 GB each I will refine them.  Y at

  • Nightly crashes when printing to the printer or .pdf. It is a new problem.

    This just started today. Nightly crashes whenever I try to print, if my printer or .pdf, and if I use the button "print" or file | Print Preview | print.'

  • Firefox prevented this page from auto redirection to another page

    Firefox prevented this page from auto redirection to another pageI get this message every time I go to the new search page. I'm if tired after you press the F - ING allow it's not funny. Cannot Fire fox remember the pages of dam that go? Every time f

  • printer does not print, it says error: 0xc18a0307

    indicates the error: 0xc18a0307.refer to the documentation of the printer... the unit is photosmart c5183... tried to switch market but same indication appears...

  • Games screen distorts

    I opened the games and selected Solitare. After the opening and the maps are prepared, I scroll on the screen and it distorts. He left shirnks and gray outside. Comes it to begin within this month. I have Windows 7. I noticed the NVIDIA updates will