Question about creating a recovery (file system) USB flash drive

Similar Questions

• X 360-15 t Touch portable spectrum: imaging system, USB Flash drive recovery?

  I'll create my recovery Image of the system using a USB Flash drive, how many GBs do I need?

  Hello

  Normally you need about 24 GB, but not 24GB Flash DRIVE on the market that's why you buy the 32 GB.

  Kind regards.

• Split 13 x 2 PCs 13-m110dx: cannot perform the system recovery using a USB flash drive

  I just bought a Split 13 x 2 13-m110dx PC that came with Windows 8. I have upgraded the OS to 8.1 and made a copy of the recovery Partition using a USB flash drive, and deleted the recovery of the PC disk that I learned that I could do. However, when I tried to retrieve OEM provided using the USB flash drive by following the directions at creation and use of a recovery of Microsoft USB drive (Windows 8) "System Recovery" was not available to the title of "troubleshooting." I tried to tell it to boot from the USB, but it askes me to insert the support of windows or other media, but rejects the flash player. What do I do now because I have not all discs?

  To use the Flash created to restore the system to the factory settings, see "Recovering from a USB flash drive" appearing in the following link:

  HP computers - running a HP System Recovery (Windows 8)

  HP System Recovery allows to reinstall or restore a HP with Windows 8 computer to the way it was at a previous time.

• Laptop HP 15-R084NG: is it possible to copy a HP recovery on another USB flash drive support?

  Hello.

  Just a few questions please:

  1. when I do only once "HP Recovery Media" to a USB key, I can then 'copy' and 'paste' on another USB flash drive as long as the 2nd flash player has sufficient capacity?

  The recovery still works well?

  I ask this question in case I have to change to another USB flash drive and I am aware I can only have a copy of the HP recovery.

  2. If this is the case, I then can also make a backup on a Western Digital external drive so that in case of malfunction of the USB flash drive, can I still transfer files to another USB flash drive?

  Thanks in advance for the answer.

  Best regards.

  Hello

  Copy / paste do not work. Please, try the following method:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/this-is-how-to-make-a-2nd-set-of-recovery-disks/TD-p/1694703

  Kind regards.

• Can I create a recovery image on a flash drive or a portable hard drive instead of discs?

  I am trying to create a recovery image before moving on to 8.1, the recommendations for the media are discs or a USB Flash drive. Can I use my portable hard drive to create this place?

  Thank you for your quick response!

• Question about creating Toshiba recovery disks

  Hello

  I wanted to know if I create recovery discs, it will have my drivers wireless, video and sound on it, or I have to download again on the Toshiba site.
  Thank you, jane

  Post edited by: ukgal

  If I get a windows 8 CD and install on my computer would be my work of drivers audio, video and wireless, or I have to reinstall again?

  Hello Jane

  When you create the recovery disc, saved on your laptop recovery image will be copied to the disk. This recovery image contains the operating system, all the drivers necessary, Toshiba specific tools and utilities, and also some additional software.

  Windows 8.
  Please, let us know what model of laptop you have exactly and what you want to do exactly. WIN8 update maybe?

• Dell files and USB Flash drive

  I did a 128GB flash drive back to Dell PC.  I have now only 508 MB of available space.  Is there a way to delete the files and recover my USB?

  Because you used the Dell backup tool, you can ask them, but it sounds like a problem with the USB device.

  Try to insert it at different PC and check if you are faced with the same question.

• question about creating a recovery disk

  Hello!! I have a question to make a data disc for my system recovery using the integrated into the software of hp, I have wifi and I am always connected are no pluged son in my system for the internet, but I read somwhere that I must disconnect from the internet before taking to the top of the cd, can I just do without blocking down on my router and modem in the other party in my house , I have other computers using this...

  Yes thank you Ol Man... I'll do it...

• In Windows XP Home edition USB Flash drive

  In order to manage the partitions on a hard disk in Windows XP Home edition, I use disk management, which allows me to set sizes of partition and DISKPART, which allows me to CLEAN the MBR or the whole disc. No idea why I need both.

  However, when I insert a USB flash drive, partitioning options are not available everywhere, either by right-clicking on it in disk management, or by typing SELECT DISK n in DISKPART, which tells me that the drive number is invalid. A number of the disk that I copied from disk management.

  How can I configure WXP as I want to repartition my USB?

  Hello

  We cannot create a partition on a USB flash drive in Windows.

  See the following articles for more information about disk management and Diskpart.

  Overview of disk management
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_diskconcepts_02a.mspx?mfr=true

  Disk management
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_disk_admin.mspx?mfr=true

  Disk management
  http://TechNet.Microsoft.com/en-us/library/bb457110.aspx

  DiskPart
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/Diskpart.mspx?mfr=true

  A Description of the Diskpart command-line utility
  http://support.Microsoft.com/kb/300415

• Laptop HP 17 p100: how the usb flash drive big that I have to create a system of 10 Windows Recovery?

  How the big usb flash drive do I need to create a system of 10 Windows Recovery?

  Yes

  Hello;

  Let me welcome you on the HP forums!

  There is really no way accurately guess in advance, with one of the reasons being that the options are available when you do this.  An option creates a recovery drive minimum with what is needed to repair the operating system.  Another option creates an image that is able to completely restore the operating system and its partition.  Thus, the size can vary from 4 GB to the size of the partition to the OS.

  Myself, I found as build-in recovery to be unreliable, especially those of Ms.  So instead, I use a third-party imaging/restoration solution known as Macrium Reflect.

  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key

  My experience is that SIR, when you use the option of Compression high, typically allows to compress the image file recorded at about 50% of the space USED in the OS partition.  This means that if you have a 40GB and 80GB OS partition is used, MR must only about 20 GB to store the image file.

  I use all the time and it usually takes less than 10 minutes to make the backup of the image and at the same time or less do a restore.  In addition, MR has the ability to add a recovery Boot Menu entry.  This then allows you to boot into Windows re, and then you can use it to do a restore - when you cannot start Windows!

  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Dell DataSafe - 'Create System Recovery' does not recognize my USB flash drive

  Hello

  I just set up my new laptop Inspiron and 'Dell DataSafe Local Backup Basic Edition' pops up advising me to "Create system recovery media" restore my system to its critical failure of hard disk factory settings.

  It gives me the option to save this on a disk or a USB Flash drive.  I have a drive hard laptop "Western Digital My Passport Essential' that I would use for this, that's why I chose the option of USB Flash drive.  However, I get a message "no USB key not found.

  Can someone tell me what I need to do to store the backup recovery system on my laptop hard drive?  (I know a recordable DVD will be probably easier, but I did not and do not want to buy a bunch of them just for that!)

  Any notice received with gratitude.

  Thank you

  I think you may be stuck. It may be opposing on the hard drive because there are already data on this topic.

  You have a friend that can give/sell you a blank DVD?

  Ron

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• NB100 - How can I create a recovery on a USB CD?

  Hi friends,

  I recently got a NB100 with XP home. The operating system has been reinstalled and did not have any CD of the operating system.

  Given that I have not an external CD drive how can I create a recovery on a USB CD. I would like to see the function of USB USB just like the CD in case something really goes wrong.

  Can some help me to find a tutorial to do this?

  Thanks for your help.

  SAJ.

  Great! Thanks for sharing this with us!

• Create a recovery media using a USB Flash drive

  Computer SONY Vaio laptop model #SVE14A35CXH Windows 8

  I'm unable to create a recovery media using a USB Flash drive.

  The computer recognizes the flash drive in my computer as drive E. When I try to create the recovery through media sat DOWN, my flash drive is not recognized.

  If anyone has had this problem and if so; How can I fix it?

  Hi cmptrsue, are there any error messages? Is it possible to create another recovery media using another usb drive? You can use this link as a guide in creating a.

  If my post answered your question, please mark it as "accept as a Solution.

  http://bit.LY/LapMagWin

• When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

  (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS