question about data transfer from the computer using LAN network Analyzer

Hello. I had a problem.

I download the driver of instruments and settings S measured by the Rohde & Schwarz site.

When I started using the measure, the error in the parser to network RSZVB-14 shows that

«Distance error:-222, "data out of reach,: FREQTAR1»»

In labview, had not any waveform.

Need your help.

Zinou

Hello

If you use RSZVB-14, it has frequency range 10 MHz - 14 GHz. example was written for models that start by 300 kHz.

Just change the Start frequency to 10 MHz

See you soon,.

Milo

Tags: NI Software

Similar Questions

  • What is video formats that I can transfer from the computer to the IPhone?

    Hello

    I am new user of IPhone

    I was wondering what video formats such as avi-mp4-rmvb-mkv-vob () can I transfer from my computer to my IPhone and play on IPhone?

    Videos will be MP4.

  • Data transfer from the camera to the Tablet

    I am considering buying a HP Slate & I am wandering is the best way to transfer photos from my digital SLR camera Nikon to the Tablet, also, which is the best access point for photo editing.
    Thank you very much

    Stream can use an otg memory card reader.

  • Problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

    Original title: Put WET on the old computer

    When I try to use WET to transfer from old Win XP Win 7 again, I need trasfer WET to the old computer.  So I choose this option and move on to the part where it says "Select the USB flash drive where you want to save WET".  Well, in the window is the word "computer" I can't click on it, nor is the OK button light up.  What's wrong?

    Hello

    Thanks for posting in Microsoft Community!

    It seems that you have a problem with the transfer of files from the computer Windows XP to Windows 7 using Windows Easy Transfer.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    I suggest you try the procedure described in the link and check if it helps.

    Transferring files and settings: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

    For more information, please see the links.

    Transfer files and settings from another computer
    http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

    Windows Easy transfer

    http://Windows.Microsoft.com/en-in/Windows7/transfer-files-and-settings-from-another-computer

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • I have an old data file of firefox from a transfer of the computer I did and I want to get all the sites that I had organized how can I do this?

    If earlier I transferred my old files from the computer to my new computer and when I did I tried that my firefox books brands added when I did he just make an old firefox data file. I went in there it has the markings of books, but the problem is it is not really readable a little mixed up and I want to know if I can import it to my only current or somehow get it organized so I can at least see them outside or on a note pad just each bookmark on its own line? I added a picture what it looks like

    You can use the notebook (Firefox/tools > Web Developer) to inspect and edit files in JSON format quite easily.
    There is a "Pretty Print" button to add line breaks.

  • Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

    Separated from this thread.

    Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

    Hello

    You cannot copy the drivers installed anyway.

    Saving your files:

    You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

    See you soon.

  • Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

    Hello

    I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

    "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

    I tried to look for a solution, but I did not understand what Live Meeting I need to download.

    Can you help me?

    Thank you.

    Original title: Live Meeting 2007

    Hi Alex,

    Thanks for posting your query in Microsoft Community.

    I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

    FAQ: Live Meeting related topics media

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • I get about one second from the previous movie when the scene selection in the menu of the DVD

    I have PE 12 for mac and have a 21.5 "iMac with 4 GB RAM and 1 TB hard drive.  I asked questions on here before all of a DV footage.

    I have a delay of 1 hour, 20 minutes and used markers to scene to go to the cinema in the timeline panel.  There are 11 movies in the video.  Markers are at the beginning of the scene in question.  On some of the later scenes, I get about one second from the previous movie before the start of the current movie.  I did thorough tests 12 EP in order get my imported correctly DV film.  I finally decided to use LifeFlix to get the imported records.  When I was testing the creation of DVD, I have not found this second of the previous film in the current issue of the film.  The problem seems to be that less pronounced during playback on my DVD than VLC Player or Apple's DVD player.  I use DVD Widescreen Dolby Preset for the DVD.  I did a DVD earlier using brands of menu with the result being 11 main menus.  I decided to abandon this approach.  Two DVDs have the same second or so of the previous clip before the current movie.

    I tried to stop markers in the DVD to recreate what I had with Pinnacle Studio, but this resulted in a DVD with a 'mistake' at the stage of decision-making case and record a DVD with menus blacks half but for the buttons.  I had added some empty frames between scenes when adding the judgment of brands, such as advised by ATR, but this failed.

    I would like to use markers to stop it again, but the problem of the second or last if a clip is more pressing.  The previous screen is sometimes less than a second and has no picture, just sound.

    Never had this problem with my old program.

    I also had "Unknown error 2131042562" when writing a normal DVD with the project and the checkbox "adjust to the content of the available space." checked.  I also got this when trying to write on a normal DVD - RW disc, to test the DVD for 'Previous film' problem as stated above.

    My burner is a USB 3 Litton Blu - ray burner.  It worked without a problem since I bought it.  I also used TDK DVD that I used for a number of years without any problems at all.  Today I wrote a data DVD without any problem.  I also wrote the content of a DVD folder on the disc, after generating an image using disk utility and it worked successfully, I realized the same DVD using the software 'Burn' successfully.

    Again, I have never had such problems in the display of the videos on DVD before.

    Your help is very appreciated.

    I managed to get a DVD with 5 images of black video between the scenes I wanted.  Video of Black made sure the brands menu worked!  Started it at the beginning of the relevant scenes.  I've never had to do this before in any program.

    Add stop markers did not.  Brands menu would go up to a point half a second or a second before the required stage, as have no black video.  I tried all sorts of things to resolve this, even to copy the project using the project archiver and the opening of the copy, but nothing helped.  I don't really know how ATR has managed to get markers to stop working.  I even added 12 frames of black video between frames with markers of the judgment at the beginning of the black video and the marker of the scene at the end.  It did not work.  I have nothing out.  The program seems to create a folder, but there is no error message and no file at the end.  He writes date folder much faster than normal when using markers of the judgment.  Also do not work 12 images of the video I think.

    I gave up at stop markers.  The normal use of the menus seems OK.  Other programs like Apple Compressor have this type of menu structure.

    Note the use of 5 images of the black video locks marks menu successfully.

  • Unable to connect to the computer using wifi

    A got a new Sony HX30V and tried to use the feature "send to the computer. He is able to connect to the wi - fi home and also able to detect the name of the computer to which it is supposed to transfer the photos to. However, during the process to actually connect to the computer, it throws a "network error" after trying for about 30 seconds. I have Windows 8 running on my system. Any ideas how to solve this?

    After spending hours and hours with exactly the same problem, I found the solution. I tried with 2 computers with different OS, 2 different networks, and I read a lot of posts...

    The problem behind it is that you could not transfer images using WIFI while your computer is also connected via WIFI.  Then:

    (1) connect your computer using the connection of the cable to the access point.

    (2) connect the camera via USB to your computer and make sure that the PlayMemories software detects the camera.

    (3) then, unplug the unit and send images to the computer using WIFI.

    If this does not work because the shipment never ends, and then review:

    (1) the battery should not be weak, or if she is then connect the camera to the power supply.

    (2) the distance from the camera to the access point must be short (maximum of 3 meters), otherwise it is too slow.

  • HP Officejet 8610: Unable to fax from the computer

    I have a HP Multifunction printer and use the fax from the computer option several times a month. I discovered this week that she did not work AGAIN. I have had this printer about a year and need to reinstall the software several times. When I select the fax printer and say 'print', the fax screen should display and ask where to send them, but nothing happens. When I check the devices screen and printers, it shows the fax as unrelated to printing or pending tasks. The machine is connected because I can print to this well, that's just something wrong with the communication by fax. I found that uninstalling and then reinstalling the printer solves the problem, but the number of times that I needed to do this is frustrating. I guess that something is messed up when windows does its updates. Is there a setting of simple connection that I could update instead of reinstalling everything on all of the computers on my network? Maybe HP could be added a correction for this option to their troubleshooting.

    Hello

    You can use the universal Fax HP driver instead:

    1. Download and extract the following:
      http://FTP.HP.com/pub/softlib/software13/COL60874/DS-146586-1/HPUFDDriver.zip
      (Use a program like Winzip or right-click on the file and select extract all).
    2. Open the extracted folder and run setup.exe
    3. Follow the instructions on the screen, a printer HP Universal Fax Driver will be created on your PC.
    4. HP Universal print driver Fax, select your printer and check the box to add a queue for your printer.

    Kind regards

    Shlomi

  • Unable to print from the Internet using HP printer psc 1210

    Original title: hp psc 1210 printer xannot can be identified by my laptop Viao soni

    I'm unable to print from the internet. This problem has not occurred before.
    What should I do or change the setting to be able to print again.
    Thanks for your help.
    Darius

    Hi Nicolas,.

    This problem may occur if the printer driver is corrupted, outdated or incompatible.

    1. what web browser do you use?

    2. the problem occurs with all web browsers?

    3. deal with any problem while printing from the computer?

    4. do you receive any error messages? If Yes, what is the exact error message?

    Method 1:
    I suggest you try the procedure described in the article, if you are using Internet Explorer 9.

    You receive a script error and are unable to print from Internet Explorer 9
    http://support.Microsoft.com/kb/2652062

    Method 2:
    If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

    I can't print or preview before printing a Web page in Internet Explorer
    http://support.Microsoft.com/kb/973479

    You can check the link for more information:

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Epson Stylus Color 400 is unresponsive to commands from the computer

    Although it worked fine for the past three years, my Epson Stylus Color 400 suddenly stopped to respond to commands from the computer.   I have checked all connections and assured cartridges are full and OK.   After turning off the power and unplug the printer from the computer, then press the power button and the power button together and then release the two buttons (all according to the Epson manual) prints a number and alignment to check properly.   What did I miss?

    Hi Brian,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem, that this printer is not responding.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    To provide the proper resolution, that I would need more information on your side.
    Do you get any error messages?

    This problem can occur if the cables are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates, and problems related to the printer.

    Method 1:
    First, let's run this fixit who will help resolve the problem.

    Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

    Method 2:
    If the first method does not resolve the problem, you can try the procedure described in the article and check if it helps.

    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Check out the link for more information.

    Why can I not print?
    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with printing, I'll be happy to help you. We, at tender Microsoft to excellence.

  • A question about external authentication with PHP OCI8 using a portfolio store

    Hello
    SQL> SELECT * FROM v$version;

BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE     11.2.0.1.0     Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production

SQL> 
    OS: Linux Fedora Core 17 (x86_64)
PHP Version: 5.4.14
Apache version (httpd): Apache/2.2.23 (Fedora)
    I have a question about OCI8 connection to the Oracle server via portfolio, which I understand is a good practice because we do not have to hard code the users password. I'm trying to read pages 117 and 118 of the book The Underground PHP and Oracle manual online to learn how to set up a portfolio. I proceeded by steps as explained in these two pages (except that at the end I connect, as a normal user, not a privileged user) yet, apparently PHP does not detect the user.

    Here's what I write in my script
    $connection = 
                oci_connect 
                    (
                        "training", 
                        "", 
                        "php_ora_usr", 
                        "AL32UTF8"
                    );
    the training is the name of the user that I use in my PHP scripts to connect to the oracle database and the password is mypassword (is not true, just for the purpose of this thread :)) the code above gives me the following error:)
    Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91

Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13
    But if I also provide the password which is,
    $connection = 
                oci_connect 
                    (
                        "training", 
                        "mypassword", 
                        "php_ora_usr", 
                        "AL32UTF8"
                    );
    Obviously it works, but at the same time, this means that my wallet is not operational.

    So I'll write here, step by step, how I did according to the instructions contained in the pages 117 and 118 of the above mentioned book and I would be grateful if you could kindly tell where I made the mistake (s)

    The following text was performed under my oracle linux (so the dbagroup)

    Step 01:_
    I created and provided the password for the directory of portfolio
    mkstore -wrl /home/oracle/wallet_dir -create
    Step 02:_
    I created an entry for my oracle user that will be used in my PHP scripts to connect to oracle
    user: training
    password: mypassword
    mkstore -wrl "/home/oracle/wallet_dir" -createCredential php_ora_usr training mypassword
    I also checked that the entry was actually created for my user in the portfolio
    $ mkstore -wrl "/home/oracle/wallet_dir" -listCredential
Oracle Secret Store Tool : Version 11.2.0.1.0 - Production
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.

Enter wallet password:                
   
List credential (index: connect_string username)
1: php_ora_usr training
$
    Step 03:_
    I added the following to my $TNS_ADMIN/tnsnames.ora
    .  .  .
php_ora_usr = 
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = db02)
    )
  )
.  .  .
    Step 04_
    I added the following to my $TNS_ADMIN/sqlnet.ora
    # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.

NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

ADR_BASE = /u01/app/oracle

WALLET_LOCATION =
    (SOURCE =
        (METHOD = FILE)
        (METHOD_DATA =
            (DIRECTORY = /home/oracle/wallet_dir)
        )
    )
SQLNET.WALLET_OVERRIDE = TRUE
SSL_CLIENT_AUTHENTICATION = FALSE
SSL_VERSION = 0
    _ Step 05
    The TNS_ADMIN environment variable is already set correctly in * / etc/sysconfig/httpd * so I didn't need to do something for this step


    Step 06_
    I gave to access Apache (as root) in the directory of portfolio (in fact, it seems that the user oracle (dba) of linux also has the required privileges to grant this access to the apache)
    # setfacl -m u:apache:rx /home/oracle/wallet_dir
# setfacl -m u:apache:r /home/oracle/wallet_dir/{cwallet.sso,ewallet.p12}
    Step 07_
    Restart Apache
    # service httpd restart
    Step 08_
    Finally make a test connection using the connection string php_ora_usr which the entry was created earlier. And the test was not successful, as indicated above
    $connection = 
                oci_connect 
                    (
                        "training", 
                        "", 
                        "php_ora_usr", 
                        "AL32UTF8"
                    );
    The error message:
    Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91

Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13
    I would appreciate it if you could kindly shed some light.

    Thanks in advance,
    Dariyoosh

    That gives a good clue to begin with. With your platform/Apache/DB, you might need different ACLs. Test directory and permissions. Check what euid your Apache runs as. Good luck.

  • Question about data dba_extents in

    Good evening

    I'm learning to Oracle 11 GR 2 (I'm a beginner). If I log in as SYSTEM and run the following script:
    drop table table123;

create table table123 (t varchar2(10));

select tablespace_name, segment_name from dba_extents where segment_name like 'TABLE%';
    I get (as expected) the following output:
    TABLESPACE_NAME                SEGMENT_NAME
------------------------------ ----------------------------------------
SYSTEM                         TABLE_PRIVILEGE_MAP
SYSTEM                         TABLE123
EXAMPLE                        TABLE2
EXAMPLE                        TABLE1
    always connected as long as SYSTEM I drop from the table using:
    drop table table123;
    Now, I'm going on another session where I am logged in as a different user (but the user has been granted, it's all there) and I do the same thing that I did like SYSTEM (which is running the first script shown above) and the result is different (segment for TABLE123 name is absent) as the output below shows :
    TABLESPACE_NAME                SEGMENT_NAME
------------------------------ --------------------
SYSTEM                         TABLE_PRIVILEGE_MAP
EXAMPLE                        TABLE2
EXAMPLE                        TABLE1
    I can't understand why the segment for TABLE123 is still missing, the same script was executed. The only difference is the user, but since this user has as many features as the SYSTEM itself I don't see how the user makes a difference in this case.

    The question is: What happened to TABLE123, why it is not displayed in the second exit?

    Thank you for your help,

    John.

    Good things, sorry about that :)

    This is a new feature of 11... creation of segment carried over to the work.

    You can read about it here.

    http://download.Oracle.com/docs/CD/E11882_01/server.112/e10595/tables002.htm#ADMIN13319
    and
    http://Antognini.ch/2009/09/deferred-segment-creation/

    As the gap with the SYSTEM (or SYS) VS. someone else... I can only repeat that he is one of the reasons (among many others) that you should not use special accounts for tests such as these :)

  • I have can´t scan in Officejet 6700. Printing from the computer works perfectly.

    I have a new 6700 Officejet connected with the USB cable to the computer. (Windows XP) Printing from the computer works perfectly. Sannen works onl + y from time to time. When the attempt at analysis, he says that there is no connection between the scanner and the computer. I changed the USB cable to exclude damage to the cables. I tried all the help files for HP without result. Who please can tell me what is happening

    I think I know where banhien is trying to guide you. I'll explain his instructions in more detail below.

    1. make sure you are on the desktop view.
    2. double-click on the icon on your desktop that resembles your printer.
    3. under the section titled scan, you should see "Manage Scan to Computer".
    4. click on "Manage the Scan to Computer" and a window that's going to Enable.
    5. click on activate to activate computer scanning.

    If the icon is not on the desktop, or does not work, you may uninstall and reinstall the printer. If you need to do this, be sure to use the latest version of the software following the link. Hope this helps to clear things up a bit.

    Driver and HP Officejet Full Feature software

Maybe you are looking for