Question about high latency of the processor

Similar Questions

• Satellite C660-1F1 - Question about newer drivers and the speed of the memory

  Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?

  And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?

  Hi cryogenized,.

  > Some of the drivers for this laptop are outdated compared to the most recent drivers on peripheral manufacters website. Is it safe to use these new drivers or is it recommended to stick with the old drivers that are on the Toshiba site?
  Why you want to update your drivers? Do you expect a gain of performance with newer drivers?

  Way General, with official Toshiba drivers you are on the safe side because they are pre-tested. If you can make sure that they work properly and don t cause property damage. Install the other drivers happens on your own risk!

  > And second question: is it possible to make the fastest possible working memory supported? Don t BIOS options include options for the parameters of memory. Why the memory is running as low mhz in case of default? CPU - Z shows that the current frequency of dram is 532, 2 mhz. What is the maximum, it is at 667 mhz? Probably she can´t be 1 066 MHz as promised in the specs?
  The laptop is equipped with modules of DDR3 1066 MHz and the RAM speed is dependent on the FSB of the processor. If your CPU is throttling down, RAM modules will work also on low speed. On a high utilization of the processor (100%) the RAM modules must run with speed of 1066 MHz I think.

• Satellite C650D - a high utilization of the processor and the disk

  Hello

  Quite often get 'high 100% CPU usage' or "High use of the disc" message using IE9 or various other applications. Computer seems to work ok although slow do not very often. Scanned with Norton Internet Security 2011 and ok. Malware problem?

  Any suggestions would be helpful.

  Mrpringle

  Hi mrpringle,

  What program tells you that you have a high utilization of the processor and HARD drive? I never heard about these messages and it would be interesting to know what program it is.

  What operating system you are using?

  Please take a look in the task manager what process causes high usage.

• MacBook Pro random high utilization of the processor (iCoreService/DCAManager using + 400% CPU?)

  Hello

  I'm running an Early 2011 Macbook Pro running OS X Yosemite 10.10.5 with a 2.2 GHZ Quad Core i7 processor 1 TB Samsung 840 EVO SSD and 16 GB of RAM Crucial. I noticed for about a month, I'm going to do a simple task or two on my Mac, then all of a sudden I noticed spikes CPU temporary, 90 + degrees C and the kick of fans trying to cool high speed. Well, I don't know why this is happening when I do nothing to justify a high utilization of the processor. I'm used to the CPU running hot when I do something intensive graphic as running Autodesk Inventor CAD software, run a machine virtual or even watch a 1080 p @ 60 fps video on youtube (it is the lowest resolution that requires the Mac switch to the dedicated AMD Radeon 6750 M GPU that usually eventually warm it quickly) , but this use high random that happens when I have Mail open in the background, and one tab open with a 720 p @ 30 fps video Youtube open (or even less). I took a few screenshots of the activity Manager indicating the best processes and Intel Power Gadget indicating the temperature of the CPU:

  

  

  

  Does anyone know what are iCoreService and/or DCAManager and why they use so much of my CPU when this happens? And someone has encountered this weird behavior before? Thanks in advance!

  The most likely cause is an applicztion you have running that is corrupt and forcing them to use the CPU too. Were you able to kill the process in activity monitor? If you have not yet tried to do, so I'll try that first. I would also try to quit all open applications.

  If you start the computer in Safe Mode , you can test if the problem is still there. If it isn't, usually means something that is managed by you start-up or an application that you use may be the cause.

• In obtaining Windows XP SP3 notice of high utilization of the processor, but do not know the cause

  I keep having problems with high CPU usage, but I don't know what is the cause. I know Norton has sent me a few messages on dumprep.exe high utilization of the processor, but this isn't the only time where she do this and it is causing my computer runs slowly, and a few times the last 2 days that makes my strongest computer. I hope someone can help because I don't know anything about all this

  Hi SandieLaster,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. When the high CPU usage occurs?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• High utilization of the processor all in buffering a video

  I have a high utilization of the processor (over 40%) while only buffering of this video.

  IE10pre1

  

  Firefox 20121229 nightly, protected mode enabled

  

  Firefox 20121229 nightly, protected mode disabled

  

  Opera Next

  

  Chrome Canary

  

  a) open this url: http://www.wimp.com/marsearth/

  (b) pause the video if it starts automatically

  (c) use the the Task Manager or process explore to display the cpu/gpu use

  reproducible: for most

  Windows 7 SP1

  Flash Player 11.6.602.108 / HWA enabled

  TestPC: Gigabyte GA-K8NS Pro; Venice AMD Athlon 64 3200 +. 2 x 1 GB DDR MDT-400-CL2; Club3D HD4670 AGP; Samsung HD103SJ, SyncMaster 204BM

  While we are aware of the problem, there is little we can do about it.  The modern realities of security of the web browsers have made sandbox, a necessity.

  There is a good explanation of what is happening here: http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

  Long story short, every video packet must be transmitted from the browser to a medium integrity process broker, then the integrity process low drive flash for rendering.  If an attacker is able to hijack the thread of Flash Player, the process is low integrity, which prevents the attacker to do a lot with it.  While it is not an absolute guarantee (nothing security is), it raises the bar significantly for the attackers.

  The downside is that all this additional message passing consumes cycles CPU, especially if you are trying to fill a buffer of exceptional size as soon as possible.  There's not a lot of opportunity to optimize this.

  If you're fine with the risk, you can manually disable ProtectedMode on your machine.  If you deal only with trusted sites, and you do not have anything critical with the machine (work, banking, etc.), then it is probably not a huge deal.

  Finally, ProtectedMode is like a vaccine - it's one thing to immunity.  If the majority of people run it, exploits targeting machines without that it does not conform and probably not merit to be pursued when you look at the effort involved in the development of a feat of end-to-end.  If a large number of people turn it off, it becomes economically attractive for builders of networks of zombie computers, and you will have problems if you do not use.

  To disable the Protected Mode, add the following line to your mms.cfg file located in:

  32-bit Windows: C:\windows\system32\macromed\flash

  64-bit Windows: C:\windows\syswow64\macromed\flash

  ProtectedMode=0 
  

  If the mms.cfg file does not exist, create one to any text editor standard (p. ex. Notepad)

  Depending on your operating system, you must first save the mms.cfg file in a directory writable (for example, your document or desktop folder), and then copy the file into the folder using Windows Explorer.

  To re - enable Protected Mode, simply delete the line in the mms.cfg file.

• Leaks memory satellite L655 - 14 d, high utilization of the processor after Win 10 updated

  Hello world

  recently, I updated my Toshiba L655 - 14 d running on win7 Home premium 64-bit to win 10.

  After that update system is memory leaks, high utilization of the processor and get stuck every 5 to 10 seconds, is a rhythmic problem happens while Starter upward.

  If music is played nothing breaks and distortion, while using word or another office associated SW it became marked delay in the characters that appear on the screen, using the internet or live streaming is also not smooth.

  Any suggestions to solve these problems?

  It is advisable to change the RAM and upgrade to the new HARD drive (current RAM is 3GB 1066 MHz and is disc HARD 500 GB, ATI Radeon graphics card), if the change has advised if I want on the RAM even or I can go for a more of the same for the HARD drive also.

  Thanks in advance.

  You may need to check if the problem could be related to some drivers installed (maybe GPU driver would need an update) or 3rd party software.
  Background running processes in the context of the system could block the CPU, and this could slow down the performance of the system...
  So a quick glance in the task manager can be useful.

  Of course, upgrade of RAM can be useful too... If you run Win 64 bit system, upgrade of RAM is recommended.
  The 32-bit OS can handle only 3.2 GB RAM... so in this case the RAM upgrade would be useless.

  With regard to upgrading the HARD drive:
  The SATA controller is able to manage any size of HARD drive, but to be honest, this will not increase the performance of the laptop... But change from HDD to SSD drive would increase the performance of the system... so I recommend you replace the HARD drive with SSD drive.

• high utilization of the processor in standby mode / x 230

  Hi all

  I have an i5 x 230, win8 installed pro on an ssd crucial msata m4, 16 GB of ram. Recently, I noticed a sharp decline in the life of the battery. I believe that this is due to the high utilization of the processor when idle, I see it in the Manager of tasks and shows the process system hovering over 30% cpu usage. It goes down when I restart, but just on the rise after some time, perhaps on his return from his sleep.

  Does anyone have any idea on this? I tried to get a little knowledge base, but nothing came.

  Thank you!

  Hello

  Maybe it will help the following message thread: Ricoh card reader use 25% CPU

  Kind regards

  Aryeh Goretsky

• Many addons crashes and high utilization of the processor/RAM (/ questions/976131)

  I have a question which has been which is rampant in me up to now for a month in Firefox; Once Firefox has been used for quite some time (open for several days with hundreds of pages throughout these days are opened and closed) it never frees the RAM he used, I've seen it go from being initially about 400 MB initially in the first 30 minutes of opening and then, after an hour, it goes to about 600 to 900 MB , the number is somewhat normal for me, I guess that (in the days of use of Firefox 4 id get that using a lot on my old netbook) and then he goes to the point of madness at random and uses a set of 2 GB and once the fact that its almost unusably slow and sometimes must be killed with the system task manager.

  This is not normal. Especially because it happens when I have nothing but the home page of Firefox open and everything remains closed. Its as if all of the content of the pages ive visited gets hoarded by Firefox to over the years and it never came out, its almost as if Firefox is like how Windows 98 was if you kept running for days without arresting him.

  Ive had virtually quite an effort to remedy this situation suggested by the kind of useful people in the linked thread.

  • Ive disabled all addons that I don't need
  • Ive got rid of addons I need not
  • Ive started a new Firefox profile and use nothing else than the addons that I need for my navigation from day to day (so nothing else beyond what I need is active or in Firefox in the first place)
  • Ive updated flash player and most other firefox plugins lists
  • Ive updated all the drivers for my computer and Windows Update updates
  • Ive deleted the cache and cookies and persistent data several times to try and empty used Firefox RAM
  • Ive used about: memory option "reduce the memory usage" to clear the RAM of Firefox but it did nothing, if anything sometimes he did go up a few megabytes or two
  • As suggested, I disabled 3 addons 'jetpack' I needed because they were supposed to be the cause of this
  • Ive enabled addons one by one to see which is the problem, whenever I did that when I found the culprit and disabled the addon that I thought was the fault of the problem does not return that in a matter of time taking all this effort go down the drain
  • Doing a crapton of virus analyses
  • Ive read most of the articles of Firefox Help on fixing it, ive done all
  • A portable installation of Firefox runs just perfect, and even a new fresh profile without a single addon is perfect, its when I need addons, problems arise.
  • I ran show memtest, memtest86 and even the memtest that comes with Windows, that nothing is wrong with my machine

  Since I created a new profile my previous problem in the context menu of Firefox as slow as molasses is gone, but the rest focuses on yet (although less I admit).

  IM left so far with two apparently related in forefox problems, in short: use the Firefox RAM random remains very high even if there is nothing else that a tab open, heck he couldn't be that the homepage of Firefox open and itd still make even if I leave it like that for hours without touching it. Here is an example of earlier today https://app.box.com/s/sc7xpmsjnmf18q3rx12t

  And this is after I've used about: memory reduce memory usage command https://app.box.com/s/whbay8b4l2z89grdphzd

  And if Firefox is no not that I get from time to time the other problem with the CPU usage with a tip that freezes Firefox for a while, when it does the Task Manager window lists Firefox to use about 10% CPU usage, which is a lot considering the use of Firefox I've ever seen by more than 5% at worst before. It sometimes even simply stays like this during his inactivity by using this number of CPU. I don't have a screenshot right now Firefox home since its not to do, but here's a screenshot of another process, do http://vvcap.net/db/aSXmdVEsoZ-9tQj4TnH6.htp

  At this point, I don't know what to do anymore to be honest, I love Firefox and its addons, its what makes it unique, without them I can not navigate, I might as well use IE (ew). Part of the reason why I got a beefy computer was so that I could use Firefox instead of the opera without having to worry about its use of infamous memory (at the time I remember it being a memory hog it was at the time of Firefox 4-14, after I used Firefox 21 things improved considerably since) Ive come down to using anything else than what I need ONLY for daily browsing in the new profile and kept all other addons of Firefox usage only use inside a virtual machine (VMWare to be preice). But the problem still persists. I'm sorry it's long, but I want to just be detailed as possible so that this problem can be solved

  Finally, my profile; as I have no idea if the troubleshooting attached or not contains.

  Intel Core i7 2630QM @ 2.00GHz (with Turbo Boost 2.9 GHz) Sandy Bridge 32nm technology
  8.00 GB Dual-Channel DDR3 @ 665 MHz
  Radeon HD 6770 M (HP) (integrated graphics theres too I guess)
  112 GB ATA KINGSTON SH103S3 SCSI Disk Device (SSD, I have Firefox installed on)

  
  

• High utilization of the processor in Mode VSS when traffic through the internet.

  Hi all

  I have a problem with the installation of VSS. The VSS service install act as a central office switch of transit for internet traffic and the problem arises when there are about 600 Mbps of traffic through the switch. We notice that there are a lot of packages being softswitch and the rate is quite high, almost like 100 to 200 k per second.

  The VSS switch manages ospf and BGP and have plenty of internet routing. After investigation of high CPU usage, I noticed that the AAGR switch is full and has tried to set the course of max mls to the maximum cef and restarted the VSS service.

  Unfortunately, the problem persists after restarting.

  We had planned to filter the full internet routes and enable by default and ospf route only in the VSS service and restart the VSS service to make sure that the table AAGR is not overloaded.

  If I fail the next step is to return to autonomous mode and hope that the processor will not pull up.

  My Question: These step will prevent the issue? Suggestions or the reference similar to the problem I am facing in?

  Hello Sophie,.

  unless you have a PFC 3CXL and all the DFCs the AAGR 3CXL can manage only 256 000 IP prefixes and nowdays that complete a table is in order or 310-320 000 routes.

  See

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps9336/product_data_sheet0900aecd806ed759_ps708_Products_Data_Sheet.html

  http://www.Cisco.com/en/us/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a0080159856.html

  See table 1 in the second link it tells what I wrote in the first line.

  > We planned to filter the full internet routes and enable by default and ospf route only in the VSS service and restart the VSS service to make sure that the table AAGR is not overloaded.

  You should not need the device after accepting only the default route in OSPF or BGP AAGR use will be greatly reduced this is just wait a few minutes (unless there is an underlying SW bug) for the MSFC to update CFP and then all DFCs

  Hope to help

  Giuseppe

• THE TASKHOST. EXE, high utilization of the processor - Satellite Z30 / Win 8.1 64 bit

  Hello

  I'm looking for a way to * find the battery life... *.

  For some time, the * TASKHOST. EXE *, "host process for Win tasks" (pl.: "trial dla zada hosta?) systemu Windows") * runs all the time, consumes about 30% of the CPU. It works even without any program began.

  Results:
  (1) * autonomy is much shorter *, about 5 hours from 10 hours earlier.
  (2) * the cooler fan is on a higher speed all the time * (previously - only occasionally switch on).
  (3) * around CPU is hot all the time * (see: cooler fan)-previously it used to heat only during "heavy" tasks (e.g. image processing).

  After a few tips, I turned off CARS in the Task Scheduler - no changes whatsoever.

  I would be grateful for guidance on how to make "taskhost.exe" more energy efficient.
  Thanks in advance for any suggestions!

  THE TASKHOST. EXE is a Microsoft Windows systems internal generic host process and has nothing to do with the laptop or computer manufacturer.

  I found the similar discussion which has already started in the community Microsoft.
  I think it might be useful for you to check this discussion:
  [The taskhost.exe application consumes 50 to 60% of the average utilization of the processor | http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/the-taskhostexe-application-consumes-50-60-of-the/0882ab46-43ee-4d90-8404-6802f8f4f2cf]

• Satellite C660D - high temperature of the processor

  Hello

  I recently had high readings on my C660D-14W its degrees 91 sometimes not hitting all the time mostly between 55 ° c to 70 ° c. I thought I'd take a technician because it might be filled with dust and I m not able to open the case. The strange thing is I have used for about a week or two with these readings high and I did not randomly stop once, what is normal a symptom big for what I m not sure has the size of the money on a technician but I m not ready to use a vacuum cleaner or whatever it is to dust and air it would just push inside.

  I got a quote on out all material and dusting it s no charges, but I really don't know if I have to take it to a technician, if I had no gel or random stops at all the Mr. I had a freeze while I was focusing on the computer at a given time and which has been about 2 weeks since I used it for daily such as ago videos, music and email accounts and no freeze, random stops or random reboots, so what gives. Also, I have noticed a bit of high pitched noise high so I think that the fan has a very low sound problem but I don't know if my laptop has always given this noise m.

  If someone could help me with this it would be great, I can go to a technician in any case because I m worried I will fry the CPU, I think that it of been like playing with fire used in the last 2 weeks.

  Kind regards
  Rine

  Hello

  The temperature of the processor can increase running applications of high performance such as games, videos, etc.
  It is not unusual
  The temperature of 55 ° C 70 ° C is the normal level.
  91 ° C is high, but I doubt that it always seems possibly that this level would be in the case that the CPU would be stressed a lot

  However, the cooling modules must be cleaned from time to time I m very often and I might recommend using a jet of compressed air to get the dust removed.

• How to find the reason for the high use of the processor - shared server process?

  Hello

  I have a Linux server with instance and an oracle 11.2.0.3. The database is configured for shared server. I do not know the application using the database, but they have performance problems. When I check the server I see, that ora_s001 use a processor Core with 90 to 100%. Is there a way to know the reason for the high CPU load? I'm not very adept at finding bottlenecks or bad sql statements. What I found ist, that some users have very high logical_io and the same users have much cpu_usage.

  What can I do next? Thanks for the tips.

  You must Server multi-user shared for this number of sessions. The main objective os using MTS is reducing the memory usage on the server for the UGA and PGA of sessions.

  About the CPU usage, you must session which uses this server shared at the time, with process $ v and v$ session to trace. From there, check the SQL_ID running and then get his stats. This is probably one or two SQLs with large number of I/o logic. This happens most of the time due to incorrect cardinality estimates and/or bad statistics on the subject which causes suboptimal plans to generate.

• Satellite A200-1TP - the high temperature of the processor

  Hello, I have never had a problem with my laptop up to now... I was playing a game when I couldn't play more because my keyboard was raging on the left side.
  I checked the temperature of the cpu and it was 80 c! I don't know too much about temperatures, but I think it is too high.
  I closed the game and he lowered to ~ 60, then I tried a program called orthos to check the performance of the PC while making 400 iterations of lucas-lehmer and it reached 95 C! OK, it's time to do something.
  I tried to format my laptop and see what happpens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower. I tried to clean the fan with a vacuum and I think it helped a little... I dare not open my phone because I don't know that I'll break it.
  The fan is not broken, it is running, I tried using 'speedfan' change rpm, but this program does not detect my fan so I can't do anything...
  I don't know why this is happening. I was so happy until now... I would like to repair the laptop, not to buy a laptop cooler, then... what I need to do?

  Thank you

  -Furthermore, the disc is 41 c and GPU temperature is 27 c, I think these are ok.

  Hello

  > I tried to format my laptop and see what happens... On 'high performance', it of about 64 c and on 'power saver' must be between 50 - 55 c, a better way but I think it should be lower.

  No contact, the temperature will not stay if you run applications of high performance as the games for example.
  Running high-performance programs all internal devices must run with max performance which leads to a higher heat dissipation and this leads to a higher temperature

  Of course clean dust cooling modules and debris should help cool the laptop better but it won't change the fact that you will always see a higher temperature, running games

  PS: CPU keeps the temperature of 100 degrees, that's what I found on the Intel page!

• Satellite C660 - Constant high speed CPU fan and a high utilization of the processor

  I have the Toshiba Satellite C660-F235. A few days ago, my machine was suddenly ok, fan constantly runs fastly each time and cpu use at least 50%. If I want to run some programs that require high cpu consumption, that the system is turned off automatically.

  I installed the latest version of the BIOS and all drivers and installed the new windows 7... Please help me

  Hello

  I think some sort of background process CPU stress.
  You can check this in the task-> processes tab Manager
  Click the CPU column to get the ordered process and to show all processes that emphasize the CPU.

  Closing or disabling of these processes can reduce the performance of the processor.