question about inkjet printers and take care of them

Hello

I think to buy a series inkadvantage printer. I am reluctant to go to an inkjet printer because I know of ink drying issues and I'm a light user. Sometimes I would not use the printer for a month or more. My question is if it will last with such a model of use.

I read printers generally do a periodic nozzle cleanings when left. If I keep the printer on all the time that guarantees nozzles will be fine? Or do I have to take extra precautions? Or am I stuck with printer not not last long?

Thank you.

PS HP Deskjet Ink Advantage 3525 e-all-in-one printer does good photo prints?

The print head is built into the cartridge, see the example below...

If you are printing only rarely, so my experience a printer IPH is a better option. The advantage of ink series has a range of different printers. Will they have 4 or 5 cartridges, then they IIC (individual ink cartridges with the printhead being separated). If they have 2 cartridges (mono and tricolor), then it is HPI.

More info below...

http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/DeskJet-ink-advantage-the-new-generation-of-affordable/m-p/2808625/highlight/true#M30611

Hope this helps

Ciara

Tags: HP Printers

Similar Questions

  • Question about the interruptions and priming

    Hello

    I had a few questions about the startup and interruptions in a virtualized environment

    Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

    1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

    2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

    Thanks in advance

    -SC

    sidc7 wrote:

    1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

    It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

    There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

    sidc7 wrote:

    2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

    Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

  • Questions about the terms and conditions

    Dear team of Adobe Stock,

    I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

    3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

    What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

    Thank you

    Hello

    Please see the link below for help:

    http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

  • A question about the methods and parameters.

    Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

    Taking an example:
    Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

    If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

    System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

    public int calculateAreaOfRectangle (int length, int width) {}
    int area;
    Area = length * width;
    return of area;
    }

    So if you call this method then the output will be returned in 120.

    Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

    And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

  • Questions about Failver customer and rapid failover

    have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.



    -We have two physical locations called "ABC" and "PQR".
    -ABC is the main site.
    -PQR is the backup site.
    -In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
    -In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
    -Data Guard has been configured between ABC and PQR and it works as expected.
    -Please note that we have a license for Active Data Guard.
    -We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
    -We have not yet set up a Data Guard Broker.

    We want to achieve under objectives:


    Objective 1:
    -------

    Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
    I guess it's called 'Fast Failover'. Please let me know if I'm wrong.

    Issues related to the:

    -To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
    -Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
    -What the client application / which is already connected to the CARS.
    -Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?


    Objective 2:
    --------

    As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.

    -Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.

    -Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
    However before that happens, standby database should become primary because the client session can perform write operations.

    According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.



    Issues related to the:
    ----------

    1. Please throw some light to reach above features.
    2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.


    Could you please help?

    Thank you

    I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

    Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
    http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
    What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

    Edited by: P. Forstmann on Dec 8. 2011 20:30

  • Questions about payment, cancellation, and planning for your review of VCA - VTC

    Fellow VCA (midshipman).

    I'm ready to go for my review of VCA - VTC, but I was interested in how you can pay for the exam and how much it costs. The last question, I think I found the answer to and $95, which is about €70? So, I registered for the exam with the assumption that I had to abandon in payment details before I confirmed. Unfortunately, I was already permanently registered after the first screen, I had to fill in and got an email sending me on the Pearson VIEW site. So I'm rather perplexed how me or maybe my employer can I pay for this review, if I can actually cancel it and if it is mandatory for me now to pass this review, now that I am registered of course for her.

    Kind regards

    Chris

    What you have said, I guess that the first site you visited was vmware.com and you completed the licensing process for the review.

    This operation generates an ID for you on VMware and PearsonVUE systems then this means that you can program review and pay via PearsonVUE.

    I don't think at this stage there is no obligation to actually go ahead and take the exam.

  • Question about the universal power adapter car for Satellite U500

    There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
    These units have a reputation of reliability or security for the laptop or are they to be avoided?

    Hello

    The problem is that in most cases these s universal adapter takes care of different intensity values
    You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.

    I would not recommend these universal adapters because the laptop needs some value ampere
    I recommend buying an adapter that is designed for this laptop to avoid some hardware problems

    Get in touch with the local ASP to get such part

  • questions about 2100 wlc and lwap connection

    Hello

    I have a few questions, I hope you can answer me.

    In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

    The distance between each point of access to more than 30 meters.

    1. the distance between the access points affect the accuracy or the stream. How can I calculate this

    2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

    I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

    BR

    Yamani

    Hello Ahmed,.

    Yes the distance between AP affect the wireless signal.

    to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

    You can check the following links for design and RF management

    1) http://tools.cisco.com/squish/1Ea09

    2) http://tools.cisco.com/squish/51a58

    for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

    as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

    Kind regards

    Talal

    =========
    Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

  • General question about the updates and version number

    I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

    In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

    Version - VMware ESXi, 5.1.0 1612806

    Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

    I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

    Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

    I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

    I hope this makes sense.

    Thank you

    This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

  • Question about subjects, books and tables of contents

    I have a question about the subjects, books and tocs. I have a project that someone else created, and my task is to create a new topic and add it to the table of contents. I created the topic, but when I generate CHM project it does not appear in the table of contents. I tried to update the table of contents. What I think (I guess) could be the problem, is the 'links to the topics', when I see the links to the topics in other areas (old) they seem to have a link to the main book, but the new one is not mine. Could you help me? Thank you!!!

    It seems that you have a manual table of contents page, rather than using the table of contents of CHM.

    The toc.htm topic that you see in your list of topics is probably where you will need to add your new topic.

    If the table of contents was already populated when you inherited the project, I suspect the previous author was using it just to keep track of the topics they had added manually to the topic toc.htm - added the CHM topic in summary you did mark the column of the table of contents in the list of topics like '' Yes. '' then add to the toc.htm manual is not. Hope that makes sense.

    P.S. Just guess that it is installing what I can see in the screenshot. It is quite unusual, so I hope I'm right.

  • Question about Lab Manager and ESX Resource Pools

    Hello world

    I was wondering if I can get feedback from some of the members of the community.  We used Lab Manager very strongly in our support organizations and it has proved to be a valuable tool.  Recently, we collaborated with the Department of technical training and started hosting online seminars and classes for them using Lab Manager.  Last week we had a fairly large class of users (approx. 45), each duty deploy 2 rather Beefy VMs that were very intensive resources (Jboss, SQL, Mail to name a few).  My colleague and I went through a lot of trials and planning to ensure that our infrastructure can handle the load while allowing our users to date at the same speed and reliability, so that they are used.

    Our Lab Manager ESX server pools made up of the following:

    5 HP DL380 G5 servers with 2 x Quad Core 2.8 GHZ processors (8 cores each) with 32 GB of RAM each

    2 HP DL580 G5 servers with 4 x Quad Core 2.8 GHZ processors (16 cores each) with 128 GB of RAM each

    When the class is running and everyone has made their 2 machines, we noticed for some reason, he was all on ESX2 and 3 deployment (380 s).  Then came the ESX alarms, use of 90% of memory, then more than 100% bringing the disk page.  The CPU usage was at a all time high.

    I look at the 2 580 s and there are about 4 virtual machines deployed on them.

    So my question is...

    How does he know where to launch a Virtual Lab Manager machine?  There's no sense 2 servers have been brought to the red zone, and almost overloaded when the 2 most powerful servers in my farm are nearly dormant.  I noticed sometimes in the past, but not this bad.  Normally, we have about 45-50 computers deployed at some point and it seems to spread them out properly.

    This group of training has access to the same LUN and ESX server with Betclick as any other organization that we have.

    We have decided hosting several sessions of training may be greater than this one and would like to know that the virtual machines will be distributed properly.

    I would like to know your opinion on this

    First to answer your question, then make guess what happens.

    As indicated in response Ilya, LM distributed VMs differently with active DRS resource pools and pools of resources without active DRS.

    LM place VMs when the DRS is not used.

    When DRS is used, we use the DRS admission control to select the host to place virtual machines.

    DRS is turned off, LM uses its own placement routine:

    For each virtual machine, LM filter all managed servers that cannot run the virtual machine. A complete list of patterns are:

    • The managed server has not enough memory or quota for virtual machine to run the virtual machine.

    • The host is not connected to the data store that is the virtual machine.

    • The virtual machine has active state (suspended) and the CPU of the server managed by the waking state has been captured is not compatible with the managed server currently considered.

    • The virtual machine has been a guest on 64-bit and the managed server is not 64-bit capable.

    • The virtual machine has more processors than the managed server.

    • The managed server is not accessible or is set to "prohibit deployments." Not reachable may mean that the lm-agent or its not to ping queries is not answer (this is visible in the list of managed server page).

    Once we have the complete list of eligible servers, we place the virtual machines on the host including the smallest (MemoryReservation % + CPUReservation %). By default, we reserve not CPU on LM VMs, this internship will be largely due to the memory on the host computers if you have not changed the settings of reservation of CPU on your virtual machines.

    For closed deploy to the PF3, force us all virtual machines to go on the same host, so if any virtual machines have any special data store / CPU type specification, all virtual machines is forced to go on this host. If there are conflicting requirements between different virtual machines in the same configuration, deployment will fail. Closed VMs also have another condition to check that is rarely achieved in practice: number of closed networks available on the managed server. By default, this is 20 and you will need more than 20 different configurations closed running on a managed server before you who will strike.  (LM4 allows Cross fencing host, so this does not apply in LM4).

    To make a guess blind because of your distribution problem - if you use the saved state and fencing, it's probably the type of processor.  Processor type can be checked on the host properties page.

    If you not are not I would check that the images can deploy on the 580 s by disabling the 380s and trying to deploy them.

    If you use DRS (which you're not), it could be due to deployment of virtual machines too fast for the algorithm of control for the entrance of VC.  An easy solution for this is to extinguish the DRS on the cluster manager of laboratory.

    We tested load internal repeatedly, the product QA in different laboratories, we run (LM has been used in VMworld Labs for the past couple years and internal systems of training and demonstration for our Organization implemented SE), so no need to worry about this.  I assure you that the first 'real' performance problem you will encounter will be almost certainly due to an overload of your storage array (too many IOPS / s)... and for that you have to distribute content in data warehouses and use techniques of creating paths to balance the load.

    Kind regards

    Steven

    Another thread on this: http://communities.vmware.com/message/1258902.

  • Questions about apex_web_service.make_request and collections

    Hello

    I began using with Apex Web services, and I have a few questions about the apex_web_service.make_request procedure. You can pass a name of the collection as a parameter. I'm a little confused on this parameter from the collection...

    This is perhaps a silly question, but the documentation is not very clear, so... This procedure always inserts just a line in the collection (with the XML returned by the web service call), or are there cases where several lines will be inserted?

    If there is still only a single row, what are the practical reasons to use a collection for her? I ask because in most cases interest you about the columns/rows to display in a form or a report in the Apex and I don't see the advantage to store in a collection of single-row, but I may be missing something...

    If the response contains several rows of data, it will be automatically extract the lines and insert them into the different lines of the collection? (posts...)

    What is the best approach then to extract several rows returned in the XML response and insert them into a collection? Currently I use XMLTABLE in a loop and call apex_collection.add_member for each row returned. is there a better way to do it?

    Thank you
    Luis

    Luis,

    the webservice returns only one row in the results collection.

    XMLTABLE using is a good idea, instead of using a loop, you can also use APEX_COLLECTION. CREATE_COLLECTION_FROM_QUERY or CREATE_COLLECTION_FROM_QUERY_B (B for bulk which may mean 'fast').

    brgds,
    Peter

    -----
    Blog: http://www.oracle-and-apex.com
    ApexLib: http://apexlib.oracleapex.info
    BuilderPlugin: http://builderplugin.oracleapex.info
    Work: http://www.click-click.at

  • Question about importing RAW and JPEG

    Greetings,

    Support of Adobe at the following page talks about the "import and preferences file management Definition:

    http://help.Adobe.com/en_US/Lightroom/3.0/using/WSA66356E1-47C3-405f-8E7F-0FD7AAEB0575.htm l

    I have a few questions about this, and I would really appreciate your input gtting. (I also posted this question on this page, but I don't know if it was the right place...)

    1. that means 'otherwise, Lightroom treats the JPEG in doubles as a file? The JPEG format is not available at all in these circumstances? What can I do with this file "jpeg"? Is located in the same folder as the RAW images?

    2. my understanding is that the JPEG image contains the treatment unit (e.g., Vivid, sharpning, etc.); When I import pictures from my Nikon (NEF) raw, LR does not apply to these parameters, and the image I see in LR is * really * gross (i.e., bland and "free upgrades").  If I shoot and bring in JPEG and RAW, LR is it possible to have LR somehow automatically "make RAW image look like the JPEG?

    Thank you in advance!

    Zevi

    (1) No, it simply as an initial overview.  LR replaces this overview as soon as it renderes its own.

    (2) the profiles are already built for Nikon and Canon.  Look in the calibration Panel in the develop module.

  • A question about the security and economies of pdf

    Please, I have another couple of questions, but on security and the economies of pdf:

    My first question, how can I build a prompt this popup when the form is loaded or open that asks the user a certain password used to show/hide or enable/disable some fields or objects in the form?

    My second question, how can I save the form with a name derived from a field value in the form, or a user by name which is entered by a prompt window when the form is opened or initialized?

    Any ideas, please!

    Thank you

    Mustafa

    Hi Mustafa,

    I have an example here where the script in the click event of a button prompts the user a password. If they enter the password, then four locked fields are made available to them.

    http://assure.LY/ge8Ra9

    You can copy this script to the node docReady event root (usually ' form1'). It would then fire whenever the form is opened.

    One thing to keep in mind is that this solution uses a function (called "hex_sha256"), which is within a Script (called "soHASHING_SHA256") object.

    This allws function allows you to use the hash key, so even if the user types the password (in this case "1234"), the script converts this value to a hash of key '03ac674216f3e15c761ee1a5e255f067953623c8b388b4459e13f978d7c846f4 '.

    This means that if someone looks at the form they cannot determine the password.

    Start by copying the script object and the button in your form. Then try to move the script to the button in the docReady event. Take a look by using the LC designer for more information on script objects.

    The second issue is possible, but it is considered a security risk, so you will need to use a function of trust (which is in a separate JavaScript file that should be stored on each computer that uses the form). It is very difficult to maintain. There is a long thread here: http://forums.adobe.com/message/2266799#2266799

    Hope that helps,

    Niall

  • Question about AP Autoinvoice and macthing the invoice?

    "Hi Forum - I have a question about accounts payable" * pay on reception Autoinvoice * "program.

    The question: Does autoinvoice program match invoices against PO, or do I need this to do it manually after running this program?


    Thanks in advance!

    Hello

    You have not need manually match invoices to the BP.

    The standard functionality of the remuneration to the receive function is as mentioned below:

    You can set up your vendors to pay upon receipt or delivery, and you can choose the level of consolidation of bills: paid site of landslide, a reception or packaging provider.

    After receipt or delivery operations are created, you can submit reception AutoInvoice compensation program to automatically import the invoices corresponding to the corresponding purchase orders.

    When the Payables open Interface import process is complete, you can then validate and pay these bills to order using the processing of payments of accounts payable standard feature.

    I hope this helps.

    Thanks and greetings
    Jeanny.

Maybe you are looking for